SonyメーカーKV-36FV1の使用説明書/サービス説明書
ページ先へ移動 of 36
3-862-737-21 (1) Operating Instructions KV-32FV1 KV-36FV1.
Remote Control Keep this flap unfolded and use this page for reference, SYSTEM OFF (page 16) TV/VTR (page 16) DISPLAY -- SLEEP -- JUMP -- .' TV/DBS -- (page 16) RESET -- (pages 21 and 22) VOL +/-.
WARNING To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. ATTENTION RISOUE DE CHOC ELECTRIQUE NE PAS OUVRIH PRECAUClON RIESGO DE CHOQUE ELECTRiCO NO ABRIR /h CAUTION: TO REDUCE THE RiSK OF ELECTRIC SHOCK, O0 NOT REMOVE COVER (OR BACK).
ii Welcome! rhank you for purchasing the Sony Frinitron ® Color TV. Before reading, check fie model number located on the front of this manual or on the rear of your TV.
Connecting and Installing the TV Making Connections Refer to the table below, it will direct you to the diagram suitable to the components you will be connecting.
Note about the AC Power Cord The AC power cord is attached to the rear of the TV with hooks. Use caution when removing the AC plug from its holder. Gently slide the cord in the upward direction, without removing the cord from the two lower hooks. YOU can detach the cord from this hook DO not remove the cord from these hooks.
Connecting and Installing the TV (continued) Cable Box Connections Some pay cable TV systems use scrambled or encoded signals that require a cable box to view all channels. Cable box 1 Connect the coaxial connector from your cable to the IN on your cable box.
VCR Connections Connecting an antenna/cable TV system with a VCR 1 Attach the coaxial connector from your cable or antenna to IN on your VCR. 2 Using A/V connectors, connect AUDIO and VIDEO OUT on your VCR to AUDIO and VIDEO IN on your TV*. 3 Using a coaxial connector, connect OUT on your VCR to VHF/UHF on your TV.
Connecting and Installing the TV (continued) Connecting two VCRs MONITOR OUT gives you the ability to use a second VCR to record a program being played by the primary VCR or to perform tape editing and dubbing. 1 Connect the VCR intended for playback using the connection instructions on page 4 of this manual.
DBS Connections Connecting a DBS (Direct Broadcast Satellite) receiver 1 Connect the cable from your satellite antenna to your DBS receiver. 2 Attach the coaxial connector from your cable or antenna to VHF/UHF on your TV. 3 Using A/V connectors, connect AUDIO and VIDEO OUT on your DBS receiver to AUDIO and VIDEO IN on your TV.
_" _ Connecting and Installing the TV (continued) DVD Player Connections Connecting a DVD Player Using A/V connectors, connect VIDEO IN on your TV to LINE OUT on your DVD Player. Connecting a DVD Player with component video output connectors This connection option offers the highest quality DVD picture.
Additional Connections Connecting an audio system For an enhanced sound, connect your audio system to your TV. 1 Using AUDIO connectors, connect AUDIO OUT on your TV to one of the unused Line inputs (e.g. Tape-2, AUX1, etc.) on your stereo. 2 Set your stereo to the chosen Line input and use the AUDIO menu to set your audio output.
iB _ Connecting and Installing the TV (continued) Connecting a camcorder This connection is convenient for viewing a picture directly from your camcorder. Using A/V connectors, connect AUDIO and VIDEO OUT on your camcorder to AUDIO and VIDEO IN on your TV.
Using Special Sony Features Using the CONTROL S feature CONTROL S allows you to control your TV and other Sony equipment with one remote control. To control your other Sony equipment with },our TV's remote control, connect the CONTROL S IN jack of the equipment to the CONTROL S OUT jack on the TV with the CONTROL S cable.
Connecting and Installing the TV (continued) Connecting S-Link to a VCR S-Link will automatically power on the TV and switch to the correct video input when a tape is inserted in the VCR. 1 Using A/V connectors, connect AUDIO and VIDEO OUT on your VCR to AUDIO and VIDEO IN on your TV.
Basic Set Up Inserting batteries Insert two size AA (R6) batteries (supplied) by _atching the + and - on the batteries to the diagram inside the battery compartment. Notes • Remove the batteries to avoid damage from possible battery leakage whenever you anticipate that the remote control will not be used for an extended period.
Using Your New TV Setting up the TV automatically The Easy Setup Guide allows you to set the on-screen language and set all receivable channels in one step. The AUTO PROGRAM function of the Easy Setup Guide feature does nat apply for installations that use a cable box for all channel selection.
Watching the TV _1I of the TV features can be accessed via the remote :0ntrol. The following chart will explain the function _fthe buttons found on your remote control.
Using Your New TV (continued) Using the White Labeled Buttons for TV Operations D_SPLAY CD TVNIDEO CD ANT CD (AUX input) TMNTR +© MTS © GUIDE SYSTEM OFF CD © C_D TV DBS Press repeatedly to cycle through available displays: Status Channel number, current time, channel caption (if set) are displayed.
_/atching two programs at one time - PIP These models are equipped with dual tuners. Fhis means that PIP is "ready to use". The sound of the main picture is receded / Main _ 'd_ 6/ J Ma.
Using Your New TV (continued) FREEZE Labeled Buttons for PIP Operations _;_ _,_'_ __' ...... , .... , ....... Press to freeze the window picture. This function is great for copying down phone numbers, addresses, recipes, etc. Press FREEZE again to restore the picture.
Using Your Menus Learning menu selection Use the MENU button to access a menu and use the arrow buttons (• or _l.)to alter settings. Use the following example, in which we activate the CABLE, to learn how to modify settings. ] Press the MENU button.
II Using Your Menus (continued) Quick start to the menus The following is a guide to your menus. For detailed information on using the remote control to modify menu settings, refer to "Learning menu selection" on page 19.
Using the VIDEO (_ menu MODE : VIVID I } PICTURE BRIGHTNESS _ Adjustment COLOR HUE mmlbma, bars SHARPNESS TRINITONE: HIGH I COLOR CORRECT: OFF _MENU MOVe_ Select_ Exit_ For detailed information on using the remote control to modify menu settings, refer to "Learning menu selection" on page 19.
Using Your Menus (continued) Using the AUDIO ._ menu TRESLE "----J}Ad e°, BASS Wa_*m J _tr_ BALANCE ,_m=_ll_*m= EFFECT : OFF MTS : STEREO SPEAKER : ON AUDIO OUT : VARIABLE _MENU Move_ Se_ect_}_ Exit_ For detailed information on using the remote control to modify menu settings, refer to "Learning menu selection" on page 19.
Using the TIMER Q menu DAYLIGHT SAVING: NO 1 CURRENT TIME SET ON/OFF TIMER CHANNEL BLOCK _MENU --- --:-- AM Move_ SeleCt_ Exlt_ For detailed information on using the remote control to modify menu settings, refer to "Learning menu selection" on page 19.
Using Your Menus (continued) Using the SET UP I_ menu SET UP ] ! CHANNEL SET UP FAVORmE CHANNEL I VIDEO LABEL LANGUAGE: ENGLISH TILT CORRECTION: 0 _MENU Move_ Sel_t[_ Exit_ For detailed information on using the remote control to modify menu settings, refer to "Learning menu selection" on page 19.
FAVORITE CHANNEL Quick access to tavor#e channels VIDEO LABEL Label connected equipment for easy recognition Setting FAVORITE CHANNEL: 1 Press _ and then • or • to select AUTO or MANUAL. (Selecting AUTO will display the last five channels chosen with the remote control's 0-9 buttons.
Operating Video Equipment Programming the remote You can use the supplied remote control to operate Sony or non-Sony video equipment. 1 Press CODE SET. 2 Press VTR/DVD (FUNCTION). 3 Use the 0-9 buttons to key in the manufacturer's code number from the following chart.
Tips "_" • In some rare cases, you may not be able to operate your non-Sony video equipment with the supplied remote control. In this case, please use the equipment's own remote control. • When you remove the batteries, the code numbor may revert to the factory setting.
Operating a Cable Box or DBS Receiver Programming the remote You can program the supplied remote control to operate a cable box or DBS receiver. 1 Press CODE SET. 2. Press DBS/CABLE (FUNCTION). 3 Use the 0-9 buttons to key in the manufacturer's code number from the following chart.
Troubleshooting Consult the table below; it suggests solutions to specific problems. Problem ; You want to restore the TV's factory settings :What it could be :: : : What you can do ..... .... • First, turn the TV on. Then while pressing the RESET button on the remote control, press the POWER button on the TV.
Troubleshooting (continued) Specifications Problem Only snow and noise appear on the screen Cannot receive upper channels (UHF) when using an antenna Cannot receive any channels when using cable What it could be What you can do ...... • CABLE may not be set correctly in the SET UP menu.
KV - 32FV1 KV - 36FV1 Power requirements 120 V, 60 Hz 120 V, 60 Hz Number of inputs/outputs Video 11 3 3 S VIDEO z) 2 2 Audio JI 4 4 Audio out 4) 1 1 Monitor out _) 1 1 TV out "3) 1 1 S-Link 3 3 Y, PB, PR s) 1 1 Speaker output ON) 15W × 2 15W x 2 Power consumption ON) In use (Max.
Index A Adjusting your menus .............................................. 19 ANT ............................................................................. 16 Antenna cable ............................................................... 3 Antenna connector .
MONITOR OUT .......................................................... 6 Mono ............................................................................ 22 MTS MONO .................................................................... 22 SAP ........
デバイスSony KV-36FV1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony KV-36FV1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony KV-36FV1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony KV-36FV1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony KV-36FV1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony KV-36FV1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony KV-36FV1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony KV-36FV1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony KV-36FV1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
