BarcoメーカーIP-2003の使用説明書/サービス説明書
ページ先へ移動 of 121
Manual# 26-0302000-00 / Re v E www.barco.com www.folsom.c om Folsom Barco Events USA 11101 Trade C enter Drive Rancho Cor dova , CA 95670 ImagePRO, ImagePRO-SDI, ImagePRO-HD Installation Manual Model .
.
.
.
RECORD OF CHANGES REV # DA TE ECO # DESCRIPTION App ro ve d B y A 11/14/03 1171 Released A. Yerocostas B 12/15/03 1188 Updated Save system State description to include saving input channel ( s / w rev 1.01). Miscellaneous spelling corrections. Added Ethernet functionalit y.
.
Operators Safety Summary The general safety information in th is summary is for operating pe rsonnel. Do Not Remove Co vers or Panels There are no user-serviceable parts within the unit. Remov al of the top cover will ex pose dangerous voltages. To avoid personal injury , do not remove the top cov er.
.
ImagePRO ™ Quick Start Guide Step 1: Connect Input Sources to ImagePRO ™ 1. Connect analog video source to the ImageP RO ™ using the three universal video inputs. 2. Connect any SDI video sourc e to the SDI video i np ut (ImagePRO-SDI ™ and ImagePRO-HD ™ only).
search order: Last configuration saved for the selected input c hannel, One of 64 stored configurat ions, any custom formats stor ed by the user, library formats an d finally using a “b est guess” algorithm matching to the closest librar y format.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor i Table of Contents IMAGEPRO ™ QUICK START GUIDE ____________________________________________________________________ I.
ii Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E S AMPLE P HASE _________________________________________________________________________________________ 31 A CTIVE .
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor iii CHAPTER FOUR _____________________________________________________________________________________ 61 SERIAL COMMAND .
iv Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 1 1 CHAPTER ONE Introduction What you will find in this chapter… About ImagePRO TM Features Model IP-2003 Image.
2 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / Revisio n E.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 3 ImagePRO TM Overview Description The Folsom ImagePRO ™ is a powerful all-in-one signal proc essor t hat accepts a wid.
4 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / Revisio n E Additional ImagePRO-SDI ™ Features • One SD SDI input and output • Can be later upgraded to ImagePRO-HD • Moti.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 5 2 CHAPTER TWO INSTALLATION What you will find in this chapter… Rear Panel Connectors Rack-Mount Installation .
6 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / Revisio n E.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 7 Installation ImagePRO ™ Rear Panel Connectors UNIVERSAL IN PUT 1 IN LOOP IN LOOP UNIVERSAL INPU T 2 H/C G/Y/COMPOSITE.
8 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / Revisio n E ImagePRO-SDI ™ Rear Panel Connectors UNIVERSA L INPUT 1 IN LOOP UNIVERS AL INPUT 2 H/C G/Y/COMPOSITE R/R-Y /C UNIVER.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 9 ImagePRO-HD ™ Rear Panel Connectors RS-232 REMOTE CONT ROL H/C GENLOCK I N H/C/BURS T DVI-D OUTPUT OUTPUT 2 H/C V SDI.
10 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Rack-Mount Installation ImagePRO TM units are designed to be rack mounted an d are s upplied with front rack-mount hard ware. Rear rack- mount brackets are available as a kit and ar e recommended for use when units are mounted in transit cases.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 11 Video Input Connections Univer sal Input Conn ectors The video input section on the ImagePRO TM rear panel provides three universal inputs. Each in put can a ccept RGB, YUV, S-Video (Y/C), or composite (NTSC, PAL or SECAM) video signals.
12 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Video Output Connections Four independently buffered outputs (on e five wire B NC connection, one HD-15, one S-Video, and one Composite video BNC) are provided. Bot h 5-wire and HD-15 outputs provide the sam e Video in RGB or YPbPr format.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 13 RGB/YPbPr Video Output Connect the output device to the set of BNC connectors marked R/R-Y, G/Y and B/B-Y on the outpu.
14 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E DVI-I Video In and Loop-Through Connect ors (Universal Input 1-ImagePro-HD ™ ) Two DVI-I female connectors are locat ed on the rear panel of the ImagePRO-HD ™ . One is used for Video input and the other one is used for the buffered DVI-I Loop-Through.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 15 RS-232 Remote Control Connections The Remote serial port can be connected to a PC or ot her Remote Contro ller to sup port remote control of the ImagePRO TM unit. Pinouts for the remote port are shown below.
16 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Connection to AC Power Power Cord/Line Voltage Selection ImagePRO TM is rated to operate with the following supplies.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 17 Connect ImagePRO TM to 115 VAC power using the power cord suppli ed with the unit. Locate the power switch on the power entry module at the rear of the unit and turn the po wer on.
18 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 19 3 CHAPTER THREE Operation What you will find in this chapter… Front Panel Controls Status Display Menu C.
20 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 21 Operation ImagePRO ™ can be controlled b y using the front pan el menu contro ls or remotely via RS-232 or Ethernet interface. The front panel menu controls are descri bed in detail in th is section.
22 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E ImagePRO-SDI ™ Front Panel Controls ADJUST H S E A R E R C LOGO ---------- BLACK ZOOM ESC PAN SEL MENU KEY S PAT SE.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 23 ImagePRO-HD ™ Front Panel Controls ADJUST TEST SEL SETUP ESC PAN ZOOM PAT 1 2 3 LOGO ---------- BLACK MENU KEY S INPUT S FREEZE H S E A R E R C SDI Figure 3-3 ImagePRO-HD ™ Front Panel SEL Used to select a menu option, contro l setting, or configuration chan ge.
24 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E In addition to the twelve illuminated p ush b uttons, the Fr ont Panel controls also include a Vacuum Fluore scent Display (VFD) and an adjustment knob.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 25 For ImagePRO-SDI and ImagePRO-HD unit s, when there is a logo image stored in non-v olatile memory, the logo will be loaded into memory at this time.
26 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Status Display After power-up or anytime none of the four menu buttons are sele cted, the display will show a basic status. This screen gives information about the currentl y selected s ystem i nputs and outputs.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 27 The user can scroll through the menu items b y turning the AD JUST control knob. A pointer (> ) at the left of a menu item indicates the current position of the scroll bar.
28 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Menu Operation Setup This is the top-level menu accessed by pr ess ing the SETUP button. Setup information can be stored i n non-volatile memory within ImagePRO TM and will be automatically recalled eac h time the unit is turned on.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 29 <in_format> Indicates the current input video format in the form, Hact x Vact @ Vr Hz (i.e 1024x768@75 Hz). If the currently selected input channel and source do n ot have a valid input signal, the <in_format> field will display “Invalid S ignal”.
30 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E The Color space value all o ws the user to select among th e possible Component Vide o Standards for YPbPr. For all other video types the color space is RGB and cann ot be sel ected or changed.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 31 1:1 Sampling Overview In order to scale an image it must first be digitized. This is the process of changing the ana log graphics signals (Red, Green, and Blue for example) into pixels stor ed in the Ima gePRO TM image memory.
32 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E raster box is i ntentionally “broke n” to allow the user to view the input v ideo behind it and a lign the input video to the raster box precisely. Contrast And Brightness The adjustment range is 75.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 33 This menu allows the user to set the input signal aspect ratio. The menu is : The Mode value is selected am ong the fo.
34 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E De-interlacing In order to process an interlaced vid eo so urce, the ImageP RO circuits must first de-interlace the image.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 35 NOTE: Configuration parameters entered in the input setup menu are saved in non-volatile memory for each input source by using the S AVE CONFIG menu item.
36 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Recall Config This menu allows the user to recall input configurati ons t hat were previously saved for the currentl y selec ted input format and type. Only configurations that match the current format and type will be displa yed.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 37 Output Setup Submenu This menu is used to configure the outp u ts of the ImagePR O. T he Output Setup Menu is illustrated below. This menu can be accessed from the SETUP MENU.
38 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E For the Horizontal entries, the unit of measure is pixels. H T o tal indicates the total pixel count per line. H Position sets the offset of start of active area from H sync.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 39 Sync Settings Submenu This menu allows the user to specify the s ync types for the current output. The submenu is illustrated bel o w: The Sync Out menu item selects among t he five possible o utput sync types: CSync, +H+V, +H-V, -H+V, -H-V.
40 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Flicker Reduce The Flicker Reduce value is n/a when th e output format is non-interlaced. Fo r interlaced formats, the range is Off (no flicker reduction) or +1 (minimum flicker reduction) through +20 (ma xim um flicker reduction).
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 41 With ImagePRO-SDI or ImagePRO-HD units, when Genlo ck type HV is s elected, and the ImagePRO output is interlaced, the.
42 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E When Input Auto Acquire is On, the system will al ways perfo rm a full sync acquisition on t he in put signal anytime the input channel is selected, the input t ype is chang ed, or the input signal changes sync rates.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 43 Formats Submenu This menu is used to define and save a ne w video format, or to edit and save a previously-defined format . These saved formats are stored in a user li brary, which is search ed d uring the auto-acquisition pr ocess before the standard system librar y.
44 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E The <editable_string> field can be selected with the SEL butt on. The cont ent of the fiel d will initially be “Format1”. Editing the string is initiated by pressing SEL with th e > cursor on the editable line.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 45 If the user picks a name that's already in use in the user library, a confirmation menu is displayed when the user invokes the Save command: Pressing the SEL key will cause the existing lib rary format to be overwri tten with the new format.
46 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E If the format selected for deletion is currently an Input format used by any of the input channels or is the Input fo.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 47 Views Submenu The Views menu allows managem ent of up to 16 stored “Views”. A View is a combination of zoom and pan settings. For example, the user may define a vie w that maps the entire input image to the upper left quarter of the output image.
48 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E The view to delete is selected from the list of availa ble views. Deleting a vi ew simply resets its pan and zoom settings to their default values. A confirmati on screen will appear when SEL is pressed.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 49 Effects Submenu The effects menu selects the transition effect when switchin g bet ween input channels.
50 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Tech Support Submenu The version displaye d is the installe d op eratin g firmware version number.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 51 System Submenu This menu allows the user to adjust the VFD Brightness an d remote control setting for RS-232 or Ethernet Interfaces as illustrated below.
52 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E The handshake value is sele cted from the follo wing values: Off or On (CTS/RTS). The reset command restores the RS232 settings to def aults: 38400, N81, Handshake On .
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 53 Valid "nnn" fields can range from 000 to 2 55. As with any selection line, the user must press the SEL button to begin editing the IP values. At this point, the first value is high lighted.
54 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E EDID DVI Input Format submenu This menu allows the user to update the ImagePRO-HD ™ ’s EDID’s preferr ed resolution. NOTE: This menu is for advanced users o n ly.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 55 Press the ESC key to proceed with the non-volatil e memor y programming. Once no DVI source or display Device are detected, ImagePRO will proceed with pr ogramming the non-volatile memory while the follo wing message is briefly displayed.
56 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Save System State This command explicitly saves all settings in the system state submenu so they may be restored at power up. This command will also save the currently selected input chan nel as the default input sel ectio n upon power up.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 57 Test Pattern Menu This menu is invoked by pr essing the T EST PAT button.
58 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Zoom Menu This menu is invoked by press ing the Z OOM button. T he default zoom amount is 100%. By selecting Amount and pressing SEL the user may increase zoom a bove 100% (z oom into the input Video) or decrease zo om b elow 100% (zoom out).
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 59.
.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 61 4 CHAPTER FOUR Remote Commands What you will find in this chapter… Serial Command Syntax Remote Commands .
62 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 63 Serial Command Syntax Serial Parameters The following are the default paramete r settings for seri al communication. Baud Rate is 38.4K. Parity is NONE. Stop Bit is 1. Data Bit is 8.
64 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E ImagePRO TM Remote Commands Resolution Re mote Commands RESH Query list of available Resolutions RESI nn Set current .
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 65 ISMP? in Query Input Sample mode ISYNC in mode Set Input Sync ISYNC? in Query Input Sync ISYNCSLICE in nnn Set Input S.
66 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E OUSCN? Query Output Underscan OTPM type raster Enables/disables Ou tput test pattern and raster bo x OTPM? Query Outp.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 67 Logo Remote Commands LOGOD Delete currently saved Logo image from Flash LOGOL Load currently saved Logo image from Fla.
68 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E ImagePRO TM Command List/Description Resolution Remote Commands Command: RESH Description: Query the available resolution list for the ImagePRO. Parameters: None Returns: All available re solutions in the format: n : HxV @F (example: 20 : 1024x768 @59.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 69 Input Remote Commands Command: ACQ mode Description: Turns Auto acquisition mode off/on.
70 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E n - Input Aspect Ratio: n[0-5], 1:1 | 3:2 | 4:3 | 5:4 | 16:9 | Custom cn - (Optional) Custom Input As pect Ratio: (0.75 – 3.00) NOTE : cn parameter is not required unless user se lects Custom Input Aspect Ratio (i.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 71 ICLIST Description: Lists the names of all saved Input configurations. Parameters: None Returns: List the names of saved In put configuratio ns, one n ame per line. Example: ICLIST (Lists all sa ved Input configurations.
72 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E = mode Example: ICSP 1 2 (Sets YPbPr input colorspace to Beta for channel 1) ICSP? 2 (Queries channel 2 for Input Colorspace.) Command: IEDGE in edge nnnn Description: Set Input Edge in oversample mode.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 73 nnnn - Input Horizontal Position: nnnn[(Input H Sync) - +(H Total - H Active)] Query: IHPOS? in Returns the Input Hori.
74 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E IRBRT? 1 R (Queries input Red Brightness of channel 1. ) Command: IRCNT in c nnn.n Description: Adjusts the Input RGB Contrast values. Parameters: in - Input chnl [1-3] c - Color [R|G|B] nnn.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 75 ISYNCSLICE in nnn Description: Adjusts the Input Sync Slice Threshold selection.
76 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Example: IVTOTAL? (Queries Input Vertical T otal) Command: IVREC in Description: Input Channel View Recall.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 77 Output Remote Commands Command: GLMODE src type Description: Sets Genlock Source and Genlock Type Parameters: src [0-4.
78 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Parameters: None Example: OCRST (Reset Output Configuration) Command: OCSAV Description: Save Output Configuration to non-volatile memor y. Parameters: None Example: OCSAV (Save Ou tput Configuration) Command: OCSP mode Description: Sets Output Colorspace mode.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 79 Command: OHATV nnnn Description: Set Output Horizontal Active. The minimum and maximum limit is dependent on the outpu t resolution.
80 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Command: OHUE nnn Description: Adjust Output Hue. Only applicable if outp ut is NT SC.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 81 OSHRP? (Queries Output Sharpness) Command: OSOG n Description: Output Sync On Green mode.
82 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E of 150) - +(Actual Output V Active *6/5, with absol ute maximum value of Output V Total – Output V Syn c)] Query: O.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 83 Edit Custom Format Remote Commands Command: EFLIST Description: Lists the names of all saved custom formats. Parameters: None Returns: List the names of saved custo m formats, one name per l ine.
84 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Command: EFHATV nnnn Description: Set custom format’ s Horizontal Active value.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 85 Command: EFVATV nnnn Description: Set custom format’ s Vertical Active value.
86 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E EFDEL filename Description: Deletes saved custom format. This fil ename is translated to all u pper cas e characters Parameters: filename – name of custom format to be deleted (translated to upper cas e).
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 87 System and Ethernet Remote Commands Command: DMSG mode Description: Sets Debug message display mode.
88 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Example: EMAC? (Queries for Ethernet MAC address) Command: SBAUD n Description: Adjust t he Serial Baud Rate.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 89 Logo Remote Commands Command: LOGOD Description: Delete Logo image from non-v olatile memory . Selecting Blac k/Logo ch annel will now displa y black. Logo feature only available on ImagePRO-SDI and ImageP RO-HD.
90 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Effects Remote Commands Command: TRN type in Description: Selects transition type when switchin g bet ween inputs. T ransition delay is onl y applicable if the transition type selected is Fade to black / Fade to logo.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 91 Pan / Zoom / View Remote Commands Command: PANH nnn.n Description: Set Output Horizontal Pan. Parameters: nnn.n - Horizontal Pan (-100.0% - +100.0%) Query: PANH? Returns the Output Horizontal Pan value in the format = nnn.
92 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Command: VIEWR nn Description: Recall View Parameters: nn – View Index [0 - 15]. Index 0 is default view (i.e. Zoom = 100%, Pan H = 0%, Pan V = 0%) Example: VIEWR 1 (Recall saved View 1.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 93.
.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 95 5 CHAPTER FIVE Software Upgrade Instructions What you will find in this chapter… Software Upgrade Instructions M.
96 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 97 Software Upgrade Instructions Overview The ImagePRO units incorporate the system soft ware in a Flash memory compon ent. F lash memor y allows easy field upgrades without the need to send the unit b ack to the factory.
98 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E 2. Find the Folsom Research folder an d sel ect ImagePRO F la s h F ile Lo ader. Preparing to Upgrade the ImagePRO Unit 1. Plug the DB-9 male connector into the port labeled “RS- 232 on the back of the ImagePRO unit.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 99 6 CHAPTER SIX Barco Folsom Information What you will find in this chapter… Warranty RMA Information Tech.
100 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 101 Barco Folsom Information Barco Folsom Warranty All video products are designed and teste d to the highest quality standards and are backed b y a full 3- year parts and labor warranty.
102 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 103 A APPENDIX Technical Specifications Model IP-2003 ImagePRO – Multi Format Image Processor.
104 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 105 Technical Specifications Video Input Inputs: Universal Inputs: (3) high band width video channels suppo r t, RGBHV/RG.
106 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E User Control Local: User-friendly front panel interface Ethernet connection (with TCP/IP) or RS -232 serial port for real-time c ontrol Physical Height: 1.5"; Width: 17" (43.
Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 107 FCC Classification This equipment has been te sted and found to comply with the limits for a Class A digi tal device, pursuan t to Part 15 of the FCC Rules.
デバイスBarco IP-2003の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Barco IP-2003をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBarco IP-2003の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Barco IP-2003の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Barco IP-2003で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Barco IP-2003を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBarco IP-2003の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Barco IP-2003に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBarco IP-2003デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。