TechnolineメーカーWS 9273-ITの使用説明書/サービス説明書
ページ先へ移動 of 24
30 LCD Display Function keys Stand WEAT HER STAT ION Instruction Manua l FEATURES: The Weather Sta tion DCF Radio controll ed time with manual setting option Time reception ON/OFF setting Batt.
31 Weekday, date and month di splay (year only i n setting mode) Time zone option (-2h to +5h) Daylight saving time (DST) setti ng Alarm setting Temperature display i n degree Cels.
32 TO INSTALL AND REP LACE B ATTERIE S IN THE T HERMO-HYGRO TRANSMITTER The outdoor thermo-hygro tra nsmitter uses 2 x AAA, IEC L R3, 1.5V batteries. To install and replace the batteri es, please follow the steps bel ow: 1. Remove the battery cover by p ushing the battery cover upwards with your thumb.
33 due to a random security code assi gned by the transmitter at start -up. This code m ust be received and stored by the weat her station in the first 3 mi nutes of power being suppl ied to the transmitter. BATTERY CHAN GE: It is recommended to replace t he batteries in all units on an annual basi s to ensure optimum accuracy of these units.
34 to be removed from both units a nd reset from step 1. 4. In order to ensure suffici ent 868 MHz transmi ssion however, the dista nce between the weather station and the transmi tter should not be more than 100 met ers (see notes on “ Positioning” and “868 MHz R eception ”).
35 the reception is successful. If t he reception is not successful at 06:00 am, then the next attempt will take place the next day at 02: 00 am. If the tower icon flashes, but does not set the time o.
36 SET key Press and hold f or 2 seconds to e nter manual setti ng modes: LCD contrast, ti me zone, time reception ON/OFF, DST ON/OFF, ma nual time setti ng and calendar To stop the alarm soun.
37 LCD SCREEN The LCD screen is spli t into 3 sections displ aying the information for time/calendar, i ndoor data, weather forecast a nd air pressure history, a nd outdoor data.
38 * When the signal i s successfully received by the weather stati on, the outdoor tran smi ssion icon will be switched on. (If not s uccessful, the icon will not be shown on LCD). The user ca n then easily see whether the l ast reception was successful (i con on) or not (icon off).
39 TIME ZONE SETTIN G: The time zone default of the weat her station is “0”. To set a different time zone: 1. The current time zone value starts fl ashing. 2. Use the + or MIN/MAX key to set t he time zone. T he range runs from -2 h to +5h hours in 1-hour intervals.
40 Note: If the Time Reception functio n is turned OFF ma nually, the clock will not attempt any reception of the DCF time as l ong as the Ti me Reception OFF function is activated. The time reception “ “ and t he “DCF” icons will not be displayed on the LCD.
41 1. The hour digit will start flashing. 2. Use the + or MIN/MAX key to set t he hour. Keep holdi ng the key allows the digi t to advance faster. 3. Press again the SE T key to set the minutes. The mi nute digits start fl ashing. 4. Use the + or MIN/MAX key to set t he minutes.
42 2. Use the + or MIN/MAX key to set t he year. Keep holdi ng the key allows the value to advance faster. 3. Press the SET key to confirm a nd enter the month setti ng mode. 4. The month digit will be flashing. Use the + or MIN/M AX key to set the month.
43 Rainy 2. The hour digit will be flashing. Use the + or MIN/M AX key to adjust the hour. Keep holding the key all ows the value to advance faster. 3. Use the ALARM key again, a nd the minute di gits will be flashing. Press + or MIN/MAX key to set the minute.
44 change of icon if the weather gets a ny better (wi th sunny icon) or worse (with rainy icon) since the icons are already at t heir extremes. The icons displayed forecasts t he weather in terms of getting better or worse and not necessarily sunny or rainy as eac h icon indi cat es.
45 WEATHER TENDENC Y INDIC ATOR The weather tendency indicators (l ocated on the left si de of the weather icons) are w orking together with the weather ico ns.
46 The bar graph indicates the ai r pressure history trend over the l ast 12 hours i n 7 interval s: 0h, -3h, -6h, -9h and - 12h. The “0 h” represents the current full hour air pressure recordi ng. The columns represent the “hPa” (0, ±1, ±3, ± 5) at specifi c time.
47 OUTDOOR TEMPE RATURE/ HUMIDIT Y DATA The last LCD section shows the o utdoor temperature and humi dity, and the recepti on indicator. TOGGLING AND RES ETTIN G THE TE MPERATURE M IN/MAX D ATA TO VIEW THE MIN /MAX TEM PERATURE D ATA Press the MIN/M AX key several times to view the MIN/MAX i ndoor and outdoor temperature sequentially.
48 TO RESET TEMP ERATURE MIN/M AX DATA Press and hold MIN/ MAX key for 3 seco nds to reset al l the indoor and outdoor temperature to current temperat ures. ABOUT THE THERMO -HYGR O TRANSM ITTER The range of the thermo-hygro tra nsmitter may be affected by the temperature.
49 false reset. Should this happe n accidentally then reset all units (see “Setting up” a bove) otherwise transmission problems may oc cur. The transmission range is aro und 100 meters from t he thermo-hygro transmi tter to the weather station (in open space).
50 To wall mount: 1. Secure the bracket onto a desi red wall using the screws a nd plasti c anchors. 2. Clip the transmitter onto the bracket. Note: Before permanently fi xing the thermo -hygr o to the wall base, pace all units in the desired locations to check that t he outdoor temperature and humidity readi ngs are receivabl e.
51 SPECIFICATIONS Temperature measuring range : Indoor : -9.9ºC to +59.9ºC with 0.1ºC resol ution +14.2ºF to +139.8ºF wi th 0.2ºF resolution ( “OF.L” displayed i f outside this range) Outdoor : -39.9ºC to +59.9ºC with 0.1ºC resol ution - 39.
52 LIABILITY DISCL AIMER: The electrical and electronic wastes contai n hazardous substa nces. Disposal of electronic waste in wil d country and/or in unauthori zed grounds strongl y damages the e.
53 R&TTE Directive 1999/5/EC Summary of the Declaration of Conformity : We hereby declare that this wireless transmissi on device does comply with the essential requirem ents of R&TTE Directive 1999/5/EC.
デバイスTechnoline WS 9273-ITの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Technoline WS 9273-ITをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTechnoline WS 9273-ITの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Technoline WS 9273-ITの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Technoline WS 9273-ITで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Technoline WS 9273-ITを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTechnoline WS 9273-ITの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Technoline WS 9273-ITに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTechnoline WS 9273-ITデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
