TFAメーカー30.3032.10.ITの使用説明書/サービス説明書
ページ先へ移動 of 34
41 WIRELESS 868 MHz TEMPERATURE STATION Instruction Manual INTRODUCT ION: Congratulations o n purchasing this compact 868 MHz Temperat ure Station w hich displays radio controlled tim e, date, indoo r and outdoor tem perature. In additi on, the dail y minimum and maximum ind oor and outdo or temperature are shown in the normal display.
42 FEATU RES: The Tempera ture Station Foldout Stand Battery compartment cover Function Keys LCD Display Hanging hole.
43 • Atomic Tim e function (DCF-77 Ra dio controlled time ) or manual tim e setting options • Atomic Tim e reception On/Off • Hour and minute display • Calendar displa y • Time zone option .
44 The Outdoor Temperature Tr ansmitter • Remote transmissio n of outdoo r temperature to Temperature St ation by 868 MH z signals • Dual channel tr ansmitter*: one int ernal channel and one probe.
45 automatically to ggled to displa y. However, if the p robe is unplugg ed, the trans mitter' s display will onl y show the reading from the inner tra nsmitter.
46 least 60 secon ds before reinsertin g them. Once th e indoor data is displayed, u ser may proceed to t he next step. 3. After the batteries are inserted, t he Temperature St ation will start r eceiving data signal from the tr ansmitter.
47 wait 60 seconds (if setting has be en done with one transmitter befor e). 2. Insert the batte ries into the first t ransmitter. 3. W ithin 30 seconds of powering up th e first transmi tter, insert the batt eries into t he Temperature St ation. Once the batteries are in place, all segmen ts of the LCD will light up briefl y.
48 Note: After the T emperature St ation has successf ully received th e second tran smitter, Channel 3 will displ ay the data me asured b y the internal senso r of the second dual channel transmitter. Ye t the probe data f rom the second tr ansmitter will no t be displaye d on the Temperature St ation.
49 BATT ERY INSTALLAT ION INSTALL AND REPLACE BAT TERIES IN THE TEMPER ATURE STATION The Temperatur e Station uses 2 x AAA, IEC LR 3, 1.5V batteries. To install an d replace the batteries, please f ollow the steps below: 1. Remove the cov er at the back of the Temperature St ation.
50 INSTALL AND REPLACE BAT TERIES IN THE TEMPER ATURE TRANSMI TTER The temperature transmitter uses 2 x AAA , IEC LR3, 1.5V bat tery. To install a nd replace the batteries, ple ase follow the s teps below: 1. Remove the b attery compartmen t cover. 2.
51 BATTERY CH ANGE: It is recomme nded to replace the batteries in all u nits regularl y to ensure optimum accuracy of these units (Battery life see Sp ecifications belo w). Please partici pate in the pres ervation of the environme nt. Return used batteries to a n authorized de pot.
52 SET key (Man ual Setting): • Press and hold to enter the settin g mode for the foll owing settings : LCD contra st, Time zone, Atomic T ime Receptio n (RCC) ON/O FF, 12/24 hr format, Manual tim e, Year, Month, D ay and °C/°F set tings.
53 LCD SCREEN A ND SETT INGS: Ind oor Temperature Time display "Weekday + Day" or Day + Month" or "Second" display Receiver low battery icon Outdoor Temperature Time reception.
54 *When the outd oor signal is succ essfully receive d by the tempe rature station, this ico n will be switched on. (If not successful, the icon will no t be shown in LCD) So user can easily see whether the l ast reception was successful (ic on on) or not (ico n off).
55 Section 3 - OU TDOOR TEMPER ATURE • Display current outdoor temp • Display daily m aximum and minim um outdoor temp erature DCF-77 RA DIO CONTR OLLED TIME: The time base fo r the radio controll.
56 If the tower icon fl ashes, but does not set the time or the DCF t ower does not a ppear at all, then please take note of the follo wing: • Recommende d distance to an y interfering sou rces like computer monitors or T V sets is a minimum of 1.5 - 2 metres.
57 LCD CONTRAS T SETTING The LCD contr ast can be set to 8 different levels (0 to 7) to suit th e user’s nee ds (default LCD contrast set ting is LCD 4). To set the desir ed contrast level: 1. The above displa y will be seen. Pr ess the + key or CH/- ke y to select the level of contrast desired.
58 The time zone d efault of the Temp erature Station is 0 hr. To chang e to another time zone: 1. Using the + ke y or CH/- key, set the time zone. T he range runs bet ween -12 to +12 hour. 2. Press the SET key to confirm an d enter the “Tim e reception O n/Off setting” or exit the setting mode by pressing the MIN/MAX ke y.
59 Note: If the Time R eception functi on is turned OF F manually, the c lock will not at tempt an y reception of th e DCF time as l ong as the Time R eception O FF function is activated. The Time Rec eption icon will not be displa yed on the LCD. 12/24 HOUR TIM E DISPL AY SETTING 1.
60 MANUAL TIME SETTING In case the Tem perature Station is not able to det ect the Atomic time (DCF) si gnal (disturbances, tr ansmitting distance , etc.), the time can be ma nually set. The c lock will then work as a normal Quartz clock. To set the clock: 1.
61 CALENDAR SE TTING The date defaul t of the temperat ure station is 1. 1. of the year 2006 after initial set-up. Once the radio-contr olled time signals a re received, the date is automatic ally updated. Ho wever, if the signals ar e not received, the date can also be set manuall y.
62 5. Confirm with SET k ey and enter the “ °F/°C TEM PERATURE UNIT SE TTING” or exit the setting mode by pressing the MIN/MAX ke y. Note: The week day of calendar will be automaticall y set after the m onth and da y value is input. °C/°F TEMP ERATURE UNIT SE TTING The default tem perature reading is °C (degree Celsi us).
63 DISPLAY OF INDOOR TEMPERA TURE READ ING: The indoor tem perature is measu red and displa yed on the second section of t he LCD. DISPLAY OF OUTDOOR TEMPERA TURE REA DING: The bottom LCD s ection shows th e outdoor tem perature.
64 DISPLAY OF INDOOR MINIMUM A ND M A XIMUM RECORDS: 1. In normal displa y mode, press the MIN/MA X key once, the minim um indoor temperature will be shown in LCD. Al so the time a nd date of rec ording this temperature will be displa yed. 2. Then press the MIN/MAX button one more tim e, the maximum indoor temperat ure will be shown in LCD.
65 3. Press three m ore time the MIN/ MAX button t o go back to the no rmal displa y. DISPLAY OF OUTDOOR MINIMU M AN D M A XIMUM RECORDS: 1. In normal displa y mode, Press th e MIN/MAX butto n three times, t he outdoor minimum tem perature and the tim e and date of r ecording this tem perature will be displayed.
66 RESETTING THE INDOOR AND OUTDOOR MINIM UM /MAXIMU M RECORDS 1. In normal displa y mode, press the MIN/MA X button once to advan ce to the ind oor MIN temp displa y.
67 Note: The daily minim um temperature record is reset automaticall y at 8:00 pm and th e daily maximum tempe rature is reset a utomaticall y at 8:00 am ever y day.
68 maximum tempe rature is reset a utomaticall y at 8:00 am ever y day. 868 MHz RECEPT ION The Temperatur e Station shoul d receive the temper ature data within 5 minutes after s et-up.
69 The transmissi on range is about 100 m from the tra nsmitter to the Tem perature Stati on (in open space). Ho wever, this dep ends on the surrou nding environme nt and interferen ce levels. If no rec eption is possibl e despite the o bservation of th ese factors, all s ystem units have to be reset (see Setting up ).
70 Free standin g W ith the stand, the Temperature Sta tion can be pl aced onto any flat surfac e. POSITIONING THE TEMPER ATURE TRANSM ITTER: The transmitter i s supplied with a holder that ma y be attached to a wall with the tw o screws supplied.
71 To wall mou nt: 1. Secure the brack et onto a desi red wall using the sc rews and plastic anchors. 2. Clip the transm itter onto the brack et. Note: Before permane ntly fixing the t ransmitter wall b ase, place all u nits in the desired loca tions to check that the outdoor temp erature reading is receiva ble.
72 • Immediately r emove all low power ed batteries to avoid leakage an d damage. Repla ce only with new bat teries of the rec ommended t ype. • Do not make an y repair attempts to the unit. Retur n them to their ori ginal point of purchase for re pair by a qualified engineer.
73 Temperature Tr ansmitter : 2 x AAA, IEC, LR3 1.5V Battery life (Alk aline batteries recom mended) Temperature St ation : Approximatel y 12 months Temperature Tr ansmitter : Approximatel y 12 months Dimensions (L x W x H) Temperature St ation : 95 x 18.
74 • A s stated on the gif t box and labele d on the product, r eading the “Use r manual” is highly recomm ended for the be nefit of the use r. This product mus t however no t be thrown in general rubbish collecti on points.
デバイスTFA 30.3032.10.ITの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
TFA 30.3032.10.ITをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTFA 30.3032.10.ITの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。TFA 30.3032.10.ITの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。TFA 30.3032.10.ITで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
TFA 30.3032.10.ITを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTFA 30.3032.10.ITの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、TFA 30.3032.10.ITに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTFA 30.3032.10.ITデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
