TopfieldメーカーHV7700 HSCIの使用説明書/サービス説明書
ページ先へ移動 of 64
T OPFIELD TF 7700 HSCI User Guide High Definition Digital Satellite Receiv er Common Interf ace.
.
Contents iii Contents 1 Introduction 1 1.1 Features ............................... 1 1.2 Controlling the digital r eceiver .................. 2 1.2.1 The front panel ....................... 2 1.2.2 The remote contr ol ..................... 4 1.3 What is common interface? .
iv Contents 3.2.2 V ideo cassette recor der .................. 1 7 3.2.3 T elevision aspect ratio ................... 1 7 3.2.4 High definition television ................. 1 8 3.2.5 Sound mode ........................ 1 9 3.3 Local time setting ....
Contents v 6 Listing Services 44 6.1 Editing the services list ....................... 4 4 6.2 Editing the favourite list ...................... 4 6 6.3 How to use on-screen keyboar d .................. 4 8 6.4 T ransferring receiver data ............
.
1 Chapter 1 Introduction The TF 7700 HSCI digital receiver is fully compliant with the international Digital V ideo Broadcasting (DVB) standar d, and can receive digital br oadcasts. For its operation, you need an antenna, which must be installed appropriately .
2 Introduction • Can store up to 5000 television and radio services. • Y ou can edit the services list. • Y ou can make a favourite list with your favourite ser- vices. • Y ou can view information about the current television or radio programme.
1.2 Controlling the digital receiver 3 ST ANDBY button switches the digital receiver between standby mode and operation mode. CHANNEL , buttons move to the next or pr evious ser- vice. They are also used to navigate in the menus and interactive screens.
4 Introduction 1.2.2 The remote control 1 2 3 4 5 6 7 8 9 10 11 12 13 22 23 21 10 20 20 19 18 17 16 15 14 1 button switches the digital receiver between standby mode and operation mode. 2 button pauses live television. 3 V .
1.2 Controlling the digital receiver 5 12 These buttons have differ ent functions per menu. They will be guided by on-screen help. 13 SA T button displays the satellite list. 14 button mutes the sound. Press again to switch it back on.
6 Introduction 1.3 What is common interface? Some broadcasts ar e scrambled so that only paid subscribers can enjoy them. Scrambled ser- vices can only be viewed with a Conditional Ac- cess Module (CAM) and a subscription card be- longing with the scrambling system.
7 Chapter 2 Setup 2.1 Unpacking Before going any further , check that you have received the fol- lowing items with your digital receiver . • Remote control unit • T wo batteries for the remote control (AAA 1.
8 Setup the power consumption of the digital receiver , refer to T able 2.1 . • The wall outlet should be near the equipment. Do not run an extention lead to the unit. • Do not expose the digital receiver to any moisture. The digital receiver is designed for use indoors only .
2.3 Rear panel connections 9 2.3 Rear panel connections The TF 7700 HSCI has some connections on the back panel. YPbPr SCART AUDIO HDMI VCR TV RS-2 32 S/P DIF USB VIDEO Y Pb Pr L R LNB IN LNB OUT 1 2 3 4 5 6 7 8 9 10 11 12 Check what connections your television set has in comparison with the digital receiver .
10 Setup 10 S/PDIF Dolby digital output socket for the audio sys- tem. 11 RS-232 Serial port for firmware update and data trans- fer . 12 USB USB port for firmware update and data transfer .
2.4 Connecting up your digital receiver 11 Connect the antenna cable to the LNB IN socket. If you have another digital receiver , link it from the LNB OUT connector . 2.4.2 Connecting to your television Between all the following connectors of your digital receiver , we recommend you use the first connector to get best pictur e quality .
12 Setup T o use the SCAR T connector For best results with a standar d television set, you should use a SCART cable, plugging one end into the TV socket on the digital re- ceiver and the other end into a free SCAR T socket on your television. Some televisions have inputs via Com- ponent or S-V ideo connectors rather than SCAR T .
2.4 Connecting up your digital receiver 13 T o use the composite video connector Y ou will need to obtain a composite video cable (RCA cable) to use the composite video connector . Plug one end of the cable into the VIDEO (yellow) socket on the digital re- ceiver , and the other end into the matching socket on your television.
14 Setup Y ou will need to obtain a SCAR T cable to use the auxiliary SCAR T connector . Plug one end of the cable into the VCR socket on the digital receiver , and the other end into the matching socket on your video cassette recor der or suchlike. 2.
15 Chapter 3 Preference Settings 3.1 Language settings Y ou can select the language in which the menu would be dis- played. In addition to that, you can select which language of au- dio track as well as of subtitle track to be output. Select the System Setting > Language Setting menu.
16 Preference Settings Subtitle language Set the Subtitle Language option to your desired language. When you watch a programme, the subtitle track of the se- lected language will be displayed if available. Apart from this setting, you can select a subtitle track with the button.
3.2 V ideo and audio settings 17 VIDEO on the back panel, you do not have to set this option because the digital receiver outputs CVBS video thr ough the RCA connector independent of SCAR T connector .
18 Preference Settings figure, set the 16:9 Displa y Format option to Letter Bo x . W ide- screen pictur es then will be reduced to fit to the width of the normal screen. Otherwise, to watch them in the shape like the right figure, set it to Center e xtract .
3.3 Local time setting 19 NOTE Y ou can enjoy only standard definition video with the follow- ing connectors: • Composite video connector ( VIDEO ) • SCART connector ( TV ) 3.2.5 Sound mode Basically , there are two audio sour ces as you can find two au- dio sockets on the back panel of the digital receiver .
20 Preference Settings Select the System Setting > Time Setting menu. Y ou should see a screen like the left figur e. Y ou can make the local time to be automatically set by using Greenwich Mean T ime (GMT). T o use Greenwich mean time, take the following steps: 1.
3.3 Local time setting 21 T able 3.1: T ime offset table Time offset City GMT − 12:00 Eniwetok, Kwajalein GMT − 11:00 Midway Island, Samoa GMT − 10:00 Haw aii GMT − 09:00 Alaska GMT − 08:00 .
22 Preference Settings 3.4 Parental control In general television programmes ar e classified according to the level of violence, nudity and language of its content. When you are watching a pr ogramme, you can check its programme classification on the information box.
3.5 Adjusting the on-screen display 23 Y ou can also restrict uses of some menus. Selecting the Access Control menu displays a list of menus that you can lock. If the Time Setting item is set to Locked , you have to enter the per- sonal identification number to access the Time Setting menu.
24 Service Search Chapter 4 Service Search After connecting up the digital receiver , you will need to per- form a service search. 4.1 Searching broadcasting services This digital receiver can be operated with both fixed and mo- torized antenna system.
4.1 Searching broadcasting services 25 The other is K u band which ranges approximately from 12 to 18 GHz. LNB The LNB (Low Noise Block converter) is used to take a wide band of rel- atively high frequencies, amplify and convert them to similar signals carried at a much lower frequency , which is called IF (Intermediate Frequency).
26 Service Search Satellite Name option to specify a satellite that is not in the satellite list, you might have to fill in the correct LNB fr e- quency . The absolute differ ence between a broadcasting fre- quency and its LNB frequency must be within 950 to 2150 MHz.
4.1 Searching broadcasting services 27 When you switch to an service, if the service is provided by a satellite other than curr ent one, it will take longer time than usual because the antenna has to turn to its position. T o use the DiSEqC 1.2, select the Installation > Motorized DiSEqC 1.
28 Service Search 5. Finally select the Store option at the Motor Control menu to save the tuned position when the receiving quality has turned good. There ar e more motor control options for installers, but this manual does not describe them. If you are an installer , refer them to the manual for the ST AB rotor .
4.1 Searching broadcasting services 29 3. Input the position of your selected satellite to the Satel- lite Angle option if it is not correct. 4. Select the Goto the position option. Then the antenna will turn toward your selected satellite calculating its position.
30 Service Search 1. Choose your desired satellite at the Satellite Name op- tion. 2. Set the Search Mode option to Auto . T o search every service of a transponder , perform the follow- ing steps: 1. Choose your desired satellite at the Satellite Name op- tion.
4.1 Searching broadcasting services 31 3. Choose your desired transponder at the F requency op- tion or input it with the numeric buttons. 4. Input the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons. 5. Set the P olar ization option to the polarization of your de- sired transponder .
32 Service Search 4.2 Editing the transponder list Y ou can add, delete or mod- ify satellite or transponder in- formation. Select the Installa- tion > SA T/TP Edit menu. Y ou should see a screen like the left figure. T o add a satellite entry , select the Add Satellite option.
4.3 Resetting to factory settings 33 4.3 Resetting to factory settings The digital receiver maintains the following data: • Satellite list • Services list • Favourite list • T imer list • Preference settings Y ou can reset all data of the digital r eceiver .
34 Service Search for confirmation. If you replay with yes , your data will be restor ed..
35 Chapter 5 Daily Usage 5.1 V olume control Use the V − and V + buttons to alter the volume to a com- fortable level. Y ou may need to adjust the volume on your television set too. T o temporarily switch off the sound, press the button.
36 Daily Usage On the services list, you can see the service information: • Service number and name • T ransmitting satellite • T ransponder information A dollar sign ( $ ) may be marked on some entries, indicating pay service. T o watch pay services, you need the subscription card.
5.2 W atching television 37 of the television company responsible for br oadcasting them. • T o change the name of the highlighted service, select the Rename option; then the on-screen keyboard appears, with which you can enter a new name. See § 6.
38 Daily Usage Y ou can switch between the television services list and the ra- dio services list by pressing the button. 5.2.2 The favourite services list Y ou can select a service to watch on a favourite list as well as on the services list. T o display the favourite lists, press the F A V button; it will be displayed.
5.2 W atching television 39 5.2.3 V iewing programme information Pressing button displays the information box, on which you can see all of the following: • Service number and name • T ransmitting .
40 Daily Usage 5.2.4 Selecting audio tracks Some programmes ar e provided with audio tacks in one or more languages. Pressing the button displays available au- dio tracks. Once you select an audio track, it will be sounded. In addition, you can enjoy audio tracks in four sound modes: Stereo , Mono , Left or Right .
5.3 V iewing electronic programme guide 41 Pressing the GUIDE button dis- plays the electronic pr ogramme guide, on which you can see the following: • Scheduled programmes • progra.
42 Daily Usage 5.4 W atching multifeed programme Some broadcasts such as sports channels can pr ovide a variety of perspectives on a programme at the same time.
5.5 Making timer events 43 3. Set the Wak eup Ser vice option to the service which pro- vides the programme you want. Pressing the OK button on this option displays a services list, from which you can select your desired service. 4. There are five timer modes: One Time means literally ‘one time.
44 Listing Services Chapter 6 Listing Services 6.1 Editing the services list Y ou would have got the services list after service search. Y ou can rename, move, lock or delete service entries on the ser- vices list. Select the Organizing Svc/F av > Organizing Ser vices menu.
6.1 Editing the services list 45 T o edit the radio services list, press button; then radio ser- vice entries will be listed on the right column. T o switch back to the television services list, press it again. T o change the name of a service, select the Rename and select a desired service; then the on-scr een keyboard appears.
46 Listing Services FT A–CAS from free services to pay services CAS–FT A from pay services to free services Provider by service pr ovider F av–NoF av from favourite services to unfavourite services. T ransponder by transponder 6.2 Editing the favourite list Y ou can make your own favourite services list.
6.2 Editing the favourite list 47 T o delete a group, put the highlight bar on a desir ed group you wish to delete and press the F3 button; then a confirmation box appears. If you select Y es , it will be deleted. Y ou can add a favourite service to a group by performing the following steps: 1.
48 Listing Services 6.3 How to use on-screen keyboard Y ou can move the highlight key horizontally with the V − and V + buttons and vertically with the P + and P − buttons. Press- ing the OK button on a key en- ters its letter in the input line.
6.4 T ransferring receiver data 49 1. Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the digital receiver , and the other end into the matching port on the other digital re- ceiver . 2. turn on the source digital receiver .
50 Firmware Update Chapter 7 Firmware Update The digital receiver has a stable and convenient firmwar e to use. However , a new firmware may be released to impr ove the digital receiver . Y ou can get the latest firmware and an update utility from the web site, http://www.
7.1 From a USB storage 51 7.1 From a USB storage If you have a USB storage, you can update the firmware fr om it. T o update the firmware from your USB storage, perform the following steps: 1. Download a new firmware from the T opfield web site. 2.
52 Firmware Update T o update the firmware with this method, perform the follow- ing steps: 1. Download a new firmware applicable to the digital receiver fr om the T opfield web site.
7.3 From another digital receiver via RS-232 port 53 1. T urn off the target digital r eceiver . 2. Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the digital receiver , and the other end into the matching port on the other digital re- ceiver .
54 INDEX Index 16:9 , 17 16:9 Display F ormat , 18 22 kHz , 26 4:3 , 17 A/V Output Setting , 16 Access Control , 23 Add new TP , 32 Add Satellite , 32 Add to F av , 37 Advanced , 30 A UDIO L , 13 Audi.
55 information box, 39 IRD Status , 50 K u band, 25 keyboard, 48 Language Setting , 15 Letter Box , 18 LNB, 25 LNB F requency , 25 , 26 LNB IN , 11 LNB OUT , 11 LNB P ower , 26 LNB Setting , 25 Local .
56 INDEX Time Offset , 20 Time Setting , 20 , 23 timer list, 42 Timer Setting , 42 T otal bloc k , 22 T ransf er Data to Other IRD , 49 T ransf er Fir mware to Other IRD , 53 T ransponder , 20 , 27 , .
.
Correct disposal of this product This marking shown on the product or its literatur e indicates that it should not be disposed with other household wastes at the end of its working life.
デバイスTopfield HV7700 HSCIの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Topfield HV7700 HSCIをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTopfield HV7700 HSCIの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Topfield HV7700 HSCIの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Topfield HV7700 HSCIで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Topfield HV7700 HSCIを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTopfield HV7700 HSCIの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Topfield HV7700 HSCIに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTopfield HV7700 HSCIデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
