Toshibaメーカー60Fの使用説明書/サービス説明書
ページ先へ移動 of 32
Networking Documents ..
2 Descript ion of the machine paper tray paper feeder document tray automatic document feeder scanner cover control panel paper exit tray Sy mbol s on t he displa y Selected options will be highlighted with an arrow ( » ) .
3 Ov er view of functions L red ia l O contrast & broadcast – send a fax or SMS to several re- cipients f%F resolution Y start fax transmission K colour copy K black-and-white copy i help Z scan.
4 Con te n t s Safety instructions .......................... 5 Installation ........................................ 6 Unpacking ................................................................. 6 Set-up...............................................
5 Safe t y instructions Please read and follow all warning notices and instruc- tions . The e-STUDIO60F should be installed on a level and stable surface . The surface should be smooth and hori- zontal . The machine may be damaged if it falls and may cause serious injury , especially to small children .
6 Insta llati on Un packing Unpack the box and check that it includes the follow- ing: Set -up Please read all warning notices and instructions and follow them precisely . 1 Remove the transport protection strips . 2 Insert the paper tray in the slots provided behind the paper feed mechanism .
7 Load ing pa per Please use only paper which is specifically intended for use with ink cartridge printers (standard format is A4 210×297 mm, 80 g/m²) .
8 v If you want to connect the e-STUDIO60F to a PC, please refer to the chapter PC connection . Y ou must install the software first and then connect the e-STUDIO60F to the PC! After you have connected the e-STUDIO60F to the mains, it will prompt you to make some basic settings as follows .
9 7 Insert the chip card “Plug ’n Print” with the contacts facing up into the slot under the control panel and confirm with OK . Remove the cartridge and repeat the process for the second cartridge . Ca r t r id ge a li gnm ent 1 After inserting the cartridges for the first time, the machine will print out a page to check their align- ment .
10 4 Click “Next” and follow the instructions on the screen . Y ou will be pr ompted to accept a license agreement . After the installation has finished, the PC has to be rebooted .
11 Se t ting s Y ou can print out a list of the current parameter settings by pressing M , 54 and OK . v T o return to stand-by mode, press X as often as necessary . Da te and t i me 1 Press M , 21 and OK . 2 Enter the date and time and confirm with OK , e .
12 Dir ect or y Y our e-STUDIO60F lets you create a dir ectory by mem- orising single entries and lists of entries . Y our machine can store up to 200 entries with names and fax numbers .
13 Fa x Send ing a fax Y There ar e two ways to fax a document: Y ou can place it onto the scanner glass (flatbed scanner) directly or load it into the automatic document feeder . Flatbed scanner 1 Open the flatbed scanner cover . Please make sure that the scanner glass is clean before placing the original .
14 2 Press a and use / , a letter or a number key to choose a recor d or a list from the dir ectory . 3 Press Y to start the transmission . Re d ia l L The last ten numbers dialled on the e-STUDIO60F will be stored in the r edial memory . 1 Insert a document .
15 WITHOUT —no transmission report; however, your e-STUDIO60F notes all transmissions that took place in its log (see Hints & tips / Logs) . ALWAYS —a report is printed with each transmission . ON ERROR —a report is only printed if the transmission failed or is abandoned .
16 Co py Inser ting a do cumen t There ar e two ways to copy a document: Y ou can place it onto the scanner glass (flatbed scanner) directly or load it into the automatic document feeder . Flatbed scanner 1 Open the flatbed scanner cover . Please make sure that the scanner glass is clean before placing the original .
17 FAST —for good quality documents, without drawings or small details NORMAL —for documents with drawings or small char- acters QUALITY —for maximal resolution Press OK . 5 Y our e-STUDIO60F can r educe or magnify a spe- cific part of a document from 25% to 400% .
18 Scan to P C Y ou can use the e-STUDIO60F to scan documents and edit the document with a PC (see Installation / PC con- nection) . Inserting a doc ument There ar e two ways to scan a document: Y ou can place it onto the scanner glass (flatbed scanner) directly or load it into the automatic document feeder .
19 Click on the lower left icon to create a pr eview , click on the lower right icon to start scanning . Click on “Profile” to cr eate different pr ofile for different document types you want to scan . A profile contains all important settings for a certain type of document .
20 SMS Y our e-STUDIO60F lets you send SMS messages all over the world . SMS (Short Message Service) was orig- inally devised for mobile communication, but it is now available in many countries via regular telephone lines . Availability of the SMS service depends on the coun- try and operator .
21 Ad va nc e d s e t t i n g s Set tings list Y ou may print a list of your e-STUDIO60F’s parameter settings to monitor any changes made to the default parameters! Press M , 54 and OK .
22 Saturation is the colour judged in proportion to its brightness: closer to - is greyer, + has gr eater satura- tion . M , 276 , OK —RGB All colours can be defined as combinations of red ( R ), green ( G ) and blue ( B ) . Y ou can change the values for each of these basic colours .
23 Hi nts & t i ps Paper feed In case of a paper jam, try to pull out the paper . If this is not possible, press M , 74 and OK to eject the pa- per . If a document is not drawn in correctly by the automat- ic feeder, press the button on the scanner cover and open the scanner cover .
24 3 Open the cartridge holder . 4 Remove the empty cartridge . 5 T ake the ink cartridge out of its packaging and re- move the protective strip . Be car eful not to touch the nozzles and the contacts .
25 TX —transmission DOC —in deposit POL —polling TR —ongoing commands SMS —SMS transmission Press M , 62 and OK . Use / to select a document from the waiting queue and confirm with OK . Modify the parameters and confirm with OK . Immediate transmission Press M , 61 and OK .
26 2 Use a cloth to lightly wipe the scanner glass ( A ) . A 3 Close the scanner . Cleaning and aligning the cartridges If the quality of printed documents deteriorates, the cartridges should be cleaned and aligned . 1 Press M , 72111 and OK . The cartridge will be cleaned automatically .
27 Anne x Fu n c t i o n s l i s t Press M , 51 and OK to print a function list . The list will be printed . Directory 11 ADD NAME .......................................................... 12 Add a name with a number to the dir ectory 12 ADD LIST ...
28 74 P APER FEED ....................................................... 23 Feed paper thr ough the mechanism Te c h n i c a l s e t t i n g s Y our e-STUDIO60F is delivered with factory-default settings . However, you may adjust it to meet your re- quirements by changing the technical parameters .
29 any cause which prevents the Pr oduct from operating or functioning correctly which arises fr om or is attribut- able to either acts, omissions, events or accidents be- yond the reasonable contr ol.
30.
31 F fax 12 fax answering device 13 fax settings 20 fax without paper 20 flatbed scanner 17 functions 3 functions list 26 H help 3 horizontal stripes 22 I immediate transmission 23 ink cartridges 6 in.
5103 506 4024 . 1 EN (T o C5) TOSHIBA TEC Germany Imaging Systems GmbH Carl-Schurz-Straße 7 41460 Neuss, Germany Te l . : +49 (0) 2131 1245-0 Fax: +49 (0) 2131 1245-402 www .
デバイスToshiba 60Fの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba 60Fをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba 60Fの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba 60Fの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba 60Fで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba 60Fを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba 60Fの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba 60Fに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba 60Fデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
