Toshibaメーカーe Studio45/35の使用説明書/サービス説明書
ページ先へ移動 of 100
DIGITAL PLAIN PAPER COPIER OPERATOR'S MANUAL FOR PRINTER FUNCTION NETWORK PRINTER BOARD GA-1040 GETTING STARTED.
.
TOSHIBA GA-1040 GETTING ST ARTED.
.
Copyright © 2001 Electronics F or Imaging, Inc. All rights r eser ved. This publication is protected by copyright, and all rights are reserved. N o part of it may be reproduced or transmitted in any form or by any means for any purpose without express prior written consent from Electronics F or Imaging, Inc.
FCC Infor mation W ARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly appro ved by the manufacturer could void the user’ s authority to operate this equipment.
Proprietary Rights Y ou acknowledge that the Software, Coded F ont Programs, T ypefaces, and T rademarks ar e proprietar y to Electronics F or Imaging and its suppliers and that title and other intellectual property rights therein remain with Electronics F or Imaging and its suppliers.
General This Agreement will be governed b y the laws of the State of California. This Agreement is the entire agreement held between y ou and Electronics For Imaging, and supersedes any other communications or adv ertising with respect to the Software and Coded F ont Programs.
Contents Introduction Conventions ix About the documentation ix Specifications x User so ftware xi System r equirements xii Windows xii Mac OS xiii P arallel port xiv IPX (N ovell) xiv Command W orkS.
viii Contents Installing User So ftwar e on a Mac OS Computer Installing Mac OS softw are 53 Setting up the GA -1040 as a PostScript printer 53 Setting up the GA-1040 in the Chooser 55 Installing GA -.
ix Conventions This manual describes how to install the user software for the T OSHIBA GA-1040 ™ and set up printing from Microsoft Windows and Apple M ac OS computers. F or information about setting up network ser vers and clients to use the GA-1040, see the Configur ation Guide .
x Introduction • The Printing G uide describes the printing features of the GA-1040 for users who send jobs via remote workstations on the network. • The J ob Management Guide explains the functions of the F ier y ® client utilities, including the Command W orkStation ™ , and how they can be used to manage jobs.
xi User so ftware • Supports F reeF orm (available as an option) • With dongle installed, GA-1040 supports DocB uilder P ro ™ (available as an option) DocBuilder P ro is available in Windows only . See your copier repr esentative for details. User so ftwar e A full set of user software is supported for the GA-1040.
xii Introduction System r equirements T o install the GA-1040 user software on a Windows or M ac OS computer , the computer must be equipped with a built-in or external CD-R OM drive.
xiii System r equirements T o use the F ier y utilities (F ier y Link ™ ) you also need: • Either Windows 95/98, Windo ws Me, W indows 2000, or Windo ws NT 4.0 with NT Service P ack 5 or later • At least 48MB of RAM; 56MB of RAM is recommended T o use T opAccess, you also need: • Either N etscape Communicator v4.
xiv Introduction T o use T opAccess, you also need: • N etscape Communicator v4.5 or later , with Java enabled, or I nternet Explorer v4.0.1 or later , with Java enabled N OTE : N etscape continues to release frequent updates to its browser . As support cannot be guaranteed for all versions, use the version specified abo ve for best results.
xv System r equirements Command W orkStation (option) T o run the Command W orkS tation application from a remote workstation, you need: • A Windo ws-based computer with a 200MHz P entium processor • Windows 95/98/M e, Windo ws NT 4.
.
1 Setting up P ostScript and/or PCL printing with Windows 95/98/Me This chapter describes installing software and setting up printing from a Windows-based computer running Windows 95/98/Me, Windows NT 4.
2 Installing User So ftware on a Windo ws Computer If you are printing using SMB (S er ver M essage Block) you can connect to the GA-1040 and install the printer drivers in a single procedure. T o configure the GA-1040 for SMB printing, see “Setting up SMB printing with Windows 95/98/M e” on page 13.
3 Setting up P ostScript and/or PCL printing with Windows 95/98/Me 3. Select an installed option from the P edestal or Finisher list. P edestal —Not Installed, P edestal 1, P edestal 2, Large Capaci.
4 Installing User So ftware on a Windo ws Computer Using T wo-W ay Communication When your printer driver is first installed, variable print options ar e displayed as “P rinter’ s Default”. If y ou have a TCP/IP enabled networ k, you can automatically update your printer driver to reflect curr ent copier settings.
5 Setting up P ostScript and/or PCL printing with Windows 95/98/Me Completing the Window s 95/98/Me printer connection T o print from W indows 95/98/Me you need to: • Set up network servers, if any .
6 Installing User So ftware on a Windo ws Computer 4. In your computer’ s BIOS settings, set P arallel P ort Mode to ECP . T o access the BIOS settings, restart the computer and press the key indicated on your monitor as soon as the computer starts up.
7 Setting up P ostScript and/or PCL printing with Windows 95/98/Me 6. Select either “Spool print jobs so progr am finishes printing faster” or “Print directly to the printer .
8 Installing User So ftware on a Windo ws Computer 4. Double-click P orts. 5. Double-click the port with LPT1 in its name . 6. In the (LPT1) Properties dialog bo x, click the Driver tab and then click Update Driver . The U pdate Device Driver Wizar d appears.
9 Setting up P ostScript and/or PCL printing with Windows 95/98/Me 8. Choose “Display a list of all the driv ers in a specific location, so you can select the driver y ou want,” and then click Next. 9. Select “Show all har dware .” 10. From the Manuf acturers list, select “(Standar d port types).
10 Installing User So ftware on a Windo ws Computer 13. Click Finish, and then close the Printer P ort Properties and System Pr operties dialog boxe s.
11 Setting up P ostScript and/or PCL printing with Windows 95/98/Me 3. Double-click the IPX/SPX-compatible Protocol icon. 4. Click the Adv anced tab. 5. In the Property list, click Fr ame Type . In the V alue pop-up menu, select the Frame Type that corr esponds to the one set during GA-1040 Netw ork Setup.
12 Installing User So ftware on a Windo ws Computer N OTE : Do not select A uto. D oing so may not select the F rame T ype specified on the GA-1040. 6. Click OK and close the Network Contr ol Panel. 7. When prompted to r estart your computer , click Y es.
13 Setting up P ostScript and/or PCL printing with Windows 95/98/Me 6. Click the printer icon labeled with the NetW are print queue y ou will use and click OK. 7. In the Add P ort dialog box, v erify that the network path is updated and click OK. Y our print jobs are transmitted to the specified print queue on the No vell file ser ver .
14 Installing User So ftware on a Windo ws Computer T O SET UP SMB PRINTING ON W INDOWS 95/98/M E 1. Double-click the Network Neighborhood icon to display y our network environment.
15 Setting up P ostScript and/or PCL printing with Windows 95/98/Me 5. Select Y es to install the printer driver and printer description file f or the selected connection. The Add P rinter Wizar d appears. N OTE : Y ou may want to install the drivers using the User Softwar e CD.
16 Installing User So ftware on a Windo ws Computer 9. If you ar e installing a driver from the files y ou downloaded using the Installer , click brows e. T o install the P ostscript driver , browse to prntdrvrPrntdrvrPS_drvrWin_98_ME. T o install the PCL driver , browse to prntdrvrPrntdrvrPcl6_drvrWin_98_ME.
17 Setting up P ostScript and/or PCL printing with Windows NT 4.0 and/or Window s 2000 14. Using a maximum o f 31 characters , enter a name for the G A-1040 (or leave the def ault name) in the Printer name box, and choose whether y ou want the GA -1040 to be your default printer .
18 Installing User So ftware on a Windo ws Computer The procedure for adding a network printer is similar to adding a port. This procedure is described in “Completing the Windo ws NT 4.0 T CP/IP and LPR connection ” on page 23 and/or “Completing the Windo ws 2000 T CP/IP and LPR connection ” on page 26.
19 Setting up P ostScript and/or PCL printing with Windows NT 4.0 and/or Window s 2000 T O CONFIGURE INSTALLABLE OPTIONS ON THE GA-1040 FROM THE P OST S CRIPT PRINTER DRIVER FOR W INDOWS NT 4.0 AND / OR W INDOWS 2000 1. Click the Start button, choose Settings , and then choose Printers.
20 Installing User So ftware on a Windo ws Computer T O CONFIGURE INSTALLABLE OPTIONS ON THE GA-1040 FROM THE PCL PRINTER DRIVER FOR W INDOWS NT AND / OR WINDOWS 2000 1. Click the Start button, choose Settings , and then choose Printers. 2. Right-click the T oshiba e-STUDIO 45 icon and choose Document Defaults (Window s NT 4.
21 Setting up P ostScript and/or PCL printing with Windows NT 4.0 and/or Window s 2000 Using T wo-W ay Communication When your printer driver is first installed, variable print options ar e displayed as “P rinter’ s Default”.
22 Installing User So ftware on a Windo ws Computer Completing the Window s NT 4.0 and/or Window s 2000 printer connection T o print from W indows NT 4.
23 Setting up P ostScript and/or PCL printing with Windows NT 4.0 and/or Window s 2000 3. Click the General tab and click Print T est Page . When you select print, your files are transmitted o ver the parallel port connection to the GA-1040. 4. Click the Sharing tab if you w ant to share the GA -1040 with network user s.
24 Installing User So ftware on a Windo ws Computer T O SET UP TCP/IP AND LPR PRINTING FOR W INDOWS NT 4.0 1. Open the Properties dialog bo x for the GA -1040, and click the P orts tab. 2. Click Add P ort. The available port types are displayed. 3. Select LPR P ort and click New P ort.
25 Setting up P ostScript and/or PCL printing with Windows NT 4.0 and/or Window s 2000 5. Press T ab and type one of the follo wing names, depending on the GA -1040 connection you w ould like to print to. direct —Jobs sent straight to the server without spooling.
26 Installing User So ftware on a Windo ws Computer Completing the Window s 2000 TCP/IP and LPR connection Once you have installed the P ostScript printer driver and printer driver files, complete the setup for the TCP/IP and LPR connection as follo ws: • P repare the GA-1040 to accept print jobs using TCP/IP and lpr protocols.
27 Setting up P ostScript and/or PCL printing with Windows NT 4.0 and/or Window s 2000 7. Select Generic Network Car d as Standard for De vice Type if the de vice is not automatically detected, and click Next. 8. Click Finish to close the Add Standar d TCP/IP Printer P ort Wizard dialog bo x, and then click Close from the Printer P orts dialog box.
28 Installing User So ftware on a Windo ws Computer T O SET UP IPX (N OVELL ) PRINTING FOR W INDOWS NT 4.0 AND / OR W INDOWS 2000 1. Double-click Network Neighborhood (Windo ws NT 4.0) or My Network Places (Window s 2000). 2. Double-click NetW are or Compatible Netw ork.
29 Setting up P ostScript and/or PCL printing with Windows NT 4.0 and/or Window s 2000 6. Click OK to install the GA -1040 PostScript or PCL printer driv er . (Follow the A dd Printer Wizard.) When installation is complete, a new printer window appears, with the name of the print queue on the N etW are ser ver .
30 Installing User So ftware on a Windo ws Computer Setting up SMB printing with Window s NT 4.0 and/or Window s 2000 If you do not have a N ovell network, y ou can print via SMB printing (also known as Windows printing or WINS printing).
31 Setting up P ostScript and/or PCL printing with Windows NT 4.0 and/or Window s 2000 2. Bro wse for the printer y ou would lik e to print to. The printer name you are bro wsing for is the name entered in the Server name set in Windows P rinting setup on the T opAccess.
32 Installing User So ftware on a Windo ws Computer 6. In the dialog box displaying lists o f manufacturer s and printers , click Have Disk. 7. If you ar e installing from the CD, type the name of the CD-ROM driv e (for e xample , D:), and click B rowse.
33 Setting up P ostScript and/or PCL printing with Windows NT 4.0 and/or Window s 2000 10. In the Printers bo x, select the appropriate GA -1040 file and click OK. N OTE : The printer driver with UC uses Letter as the default paper size; the printer driver with EU uses A4 as the default paper size.
34 Installing User So ftware on a Windo ws Computer T O SET UP IPP PRINTING WITH W INDOWS 2000 1. Click the Start button, choose Settings , and then choose Printers. 2. Double-click the Add Printer icon and click Ne xt. 3. Select Network printer and click Ne xt.
35 Installing GA -1040 softwar e Installing GA -1040 softw are The U ser Software CD includes a software installer for F ier y Link. F ier y utility software is supported on W indows 95/98/M e, Windows NT 4.0, and W indows 2000, and must be separately installed on each user’ s computer .
36 Installing User So ftware on a Windo ws Computer T O INSTALL F IERY L INK 1. Insert the User So ftware CD into the CD ROM driv e , and navigate to the softwar e fol de rs. The U ser Software CD automatically begins the printer driver installation when Auto insert notification is enabled on Windo ws.
37 Installing GA -1040 softwar e U se the following table as a guide when installing Fiery Link. F or specific instructions, read the information in each dialog box. Command W orkStation (option) The Command W orkStation software is on the Command W orkS tation CD.
38 Installing User So ftware on a Windo ws Computer T O INSTALL C OMMAND W ORK S TATION SOFTWARE 1. Insert the Command W orkStation CD. The Command W orkStation CD automatically begins the installation process with Auto insert notification enabled on W indows, which is the default setting.
39 Using the so ftware f or the first time Using the so ftwar e for the fir st time Before you can use the newly installed softwar e, you must properly configure the connection to the GA-1040.
40 Installing User So ftware on a Windo ws Computer 3. Click the Edit Fiery List button. The Edit M y Fiery List dialog box opens, and all F ier ys found appear in the A vailable F ier ys area of the dialog box. N OTE : Only F ier ys that support F ier y Link appear in the A vailable Fierys area.
41 Using the so ftware f or the first time Repeat step 4 for each GA-1040 you would like to add to the M y F iery List. 5. Click Apply to accept the changes to My Fiery List. 6. Click OK. T O MANUALLY CONFIGURE THE CONNECTION FOR F IERY L INK 1. Click the Manual tab .
42 Installing User So ftware on a Windo ws Computer 3. Select Use Nickname , and enter a nickname for the G A-1040. 4. Click OK. 5. Click Apply to accept the changes to My Fiery List.
43 Using the so ftware f or the first time T O CONFIGURE THE CONNECTION FOR F IERY L INK USING AN ADVANCED IP SEARCH 1. Click the AutoSear ch tab. 2. Click the Adv anced button.
44 Installing User So ftware on a Windo ws Computer 3. T o find all GA -1040 within an IP address r ange, enter an IP A ddress in the Fr om IP field, and an IP address in the T o IP field, and click the arrow b utton. Repeat step 3 for each IP address range y ou would like to search.
45 Using the so ftware f or the first time N OTE : Only F ier ys that support F ier y Link appear in the A vailable Fierys area. 5. T o add a GA -1040 to the My Fiery List, select it and click the arro w button. The GA-1040 appears in the M y Fiery List.
46 Installing User So ftware on a Windo ws Computer T O CONFIGURE THE CONNECTION FOR F IERY L INK USING AN ADVANCED SUBNET SEARCH 1. Click the AutoSear ch tab.
47 Using the so ftware f or the first time 3. Enter the IP address and subnet to sear ch, and click the arrow b utton. The IP address and subnet to be searched appears in the IP Range/S ubnet Addr . list. Repeat this procedur e for each IP address and subnet you would like to search.
48 Installing User So ftware on a Windo ws Computer 4. Click Search. When the search is complete, all GA-1040s found appear in the A vailable F ier ys area of the dialog box. If the GA-1040 was not found, and you would like to search again using the same parameters, click Refresh.
49 Using the so ftware f or the first time The GA-1040 appears in the M y Fiery List. Repeat step 5 for each GA-1040 you would like to add to the M y F iery List.
50 Installing User So ftware on a Windo ws Computer 3. Enter the appropriate inf ormation for the GA -1040. Nickname —Enter a name for the GA-1040. This name can be any name you wish; it does not have to match the actual Server N ame of the GA-1040.
51 Copying the printer description files f or Windows Modifying the configuration Y ou should edit the configuration whenever there is any change to your GA-1040 server or network, such as a server name or IP address. F irst change the specific GA-1040 Setup information before configuring the connection.
.
53 Installing Mac OS softw are The general steps for installing the GA-1040 user software and setting up printing on a Mac OS computer are: • Install the Adobe P ostScript printer driver and P ostScript Printer Description file (PPD). • Set up the GA-1040 in the Chooser .
54 Installing User So ftware on a Mac OS Computer T O INSTALL THE A DOBE PS PRINTER DRIVER AND PPD FILE 1. On the User So ftware CD, open the English : Printer Driver f older . If you ar e installing from files you do wnloaded using W ebT ools, open the Printer Driver f older on your hard disk.
55 Setting up the GA -1040 as a PostScript printer Setting up the GA -1040 in the Chooser After you install the Adobe P ostScript printer driver and PPD file (see “Setting up the GA-1040 as a P ostScript printer” on page 53), y ou need to set up the GA-1040 in the Chooser in order to take full advantage of its featur es.
56 Installing User So ftware on a Mac OS Computer 4. Select a GA -1040 connection from the “Select a P ostScript Printer” list, and click Create . The AdobePS printer driver automatically selects the corr ect PPD file for your GA-1040. N OTE : Y ou will need to set up each print connection separately .
57 Installing GA -1040 softwar e and fonts Installing GA -1040 softw are and f onts The Mac OS installers function essentially the same for each type of software. B efore you begin each installation, determine where you want to install each item on y our hard disk.
58 Installing User So ftware on a Mac OS Computer T O INSTALL M AC OS R UNTIME FOR J AVA 1. Read the Apple Computer Inc., License agr eement and click Agree to install the softw are .
59 Installing GA -1040 softwar e and fonts T O CONFIGURE A CONNECTION TO GA-1040 IN THE LOCAL SUBNET 1. Launch Fiery Link by double-clicking its icon. 2. The W arning dialog box “No Fiery s configured, please select a Fiery” appear s. Click OK. N OTE : If the F ier y is located on a different subnet an Err or dialog box appears.
60 Installing User So ftware on a Mac OS Computer 3. T o add a server to the My Fiery List, select it and click the arr ow b utton. The server appears in the My F iery List. Repeat step 3 for each GA-1040 you would like to add to the M y F iery List. 4.
61 Installing GA -1040 softwar e and fonts T O MANUALLY CONFIGURE THE CONNECTION FOR F IERY L INK 1. Click the Manual tab . Enter the DNS name or IP address of the G A-1040 and click the arro w button. When the arrow button is clicked, F iery Link checks for the specified GA-1040.
62 Installing User So ftware on a Mac OS Computer 2. T o give the G A-1040 a nickname , select it in the My Fiery List and click Modify . 3. Select Use Nickname , and enter a nickname for the G A-1040. 4. Click OK. 5. Click Apply to accept the changes to My Fiery List.
63 Installing GA -1040 softwar e and fonts T O CONFIGURE THE CONNECTION FOR F IERY L INK USING AN ADVANCED IP SEARCH 1. Click the AutoSear ch tab. 2. Click the Adv anced button.
64 Installing User So ftware on a Mac OS Computer 3. T o find all GA -1040s within a specified IP range , enter an IP Addr ess in the From IP field, and an IP address in the T o IP field and click the arrow b utton. Repeat step 3 for each range of IP addresses y ou would like to search.
65 Installing GA -1040 softwar e and fonts 5. T o add a GA -1040 to the My Fiery List, select it and click the arro w button. The GA-1040 appears in the M y Fiery List. Repeat step 5 for each GA-1040 you would like to add to the M y F iery List. 6. Click Apply to accept the changes to My Fiery List.
66 Installing User So ftware on a Mac OS Computer T O CONFIGURE THE CONNECTION FOR F IERY L INK USING AN ADVANCED SUBNET SEARCH 1. Click the AutoSear ch tab and click the Advanced b utton.
67 Installing GA -1040 softwar e and fonts 3. Enter the IP address and subnet to sear ch, and click the arrow b utton. The IP address and subnet to be searched appears in the IP Range/S ubnet Addr . list. Repeat this procedur e for each IP address and subnet you would like to search.
68 Installing User So ftware on a Mac OS Computer 4. Click Search. When the search is complete, all F ier ys found appear in the A vailable F ier ys area of the dialog box. If the GA-1040 was not found, and you would like to search again using the same parameters, click Refresh.
69 Installing GA -1040 softwar e and fonts 5. T o add a GA -1040 to the My Fiery List, select it and click the arro w button. The GA-1040 appears in the M y Fiery List. Repeat step 5 for each GA-1040 you would like to add to the M y F iery List. 6. Click Apply to accept the changes to My Fiery List.
70 Installing User So ftware on a Mac OS Computer Fonts The Fonts on the U ser Software CD includes screen and printer fonts that correspond to the 136 built-in P ostScript printer fonts on the GA-1040. The F ont installer copies both kinds of fonts to the System folder : F onts folder on your hard disk.
71 Setting up T opAccess T opAccess allo w you to manage your GA-1040 remotely fr om the Internet or from your company ’ s intranet. The GA-1040 has its own home page, from which you ar e able to select from a variety of functions. F or more information on using W ebtools, see the P rinting Guide and the Configur ation Guide.
72 Setting Up T opAccess T O SET UP T OP A CCESS ON THE GA-1040 (S TATIC IP, RARP, BOOTP) 1. Press the PRINTER/NETW ORK key , then press ON/OFF and OFF LINE. 2. Press SETTING and ADMIN. 3. Enter the GA -1040 password and pr ess SET . 4. Press Pr otocol Setup>TCP/IP>Ethernet.
73 Using the Installer W ebT ool Using the Installer W ebT ool The Installer W ebT ool, offered from the F iery W ebT ools website, allows y ou to easily download printer drivers dir ectly from the from the GA-1040 to your workstation. Access F ier y W ebT ools from the T opAccess site.
74 Setting Up T opAccess 4. Select a login lev el, enter a password if necessary , and click OK. N o password is required to log in as Guest. Y ou have full access to the Installer W ebT ool when logged in as Guest. 5. Click the Installer button. 6. Under the name of y our operating sy stem, click “Printer Files.
75 Using the Installer W ebT ool 9. Install the appropriate printer driv er for your oper ating sy stem. N OTE : Once you download the printer files, the installation pr ocess is identical to installing from the U ser Software CD.
.
77 Tr oubleshooting This chapter provides tr oubleshooting tips. On a Window s computer Setting up printing on Window s NT W orkstations If you have problems installing the GA-1040 with Windows NT , try installing another P ostScript printer (such as the Apple LaserW riter IIg), and then install the GA-1040.
78 Tr oubleshooting 3. Make sur e that the connection is configured correctly f or your site . T o check the current configuration, launch a F iery utility and choose Open from the F ile menu. Select the GA-1040 and click Modify to see curr ent settings.
A Adobe P ageMaker for W indows see P ageMaker for Windo ws Adobe P ostScript 3 fonts x Adobe P ostScript printer driver installer for Mac OS 53 Adobe P ostScript printer driver , see P ostScript prin.
80 Index I icon ix Installable Options specifying, from Mac OS printer driver 56 specifying, from W indows NT printer driver 19 installers Mac OS 53, 57 installing Adobe P ostScript printer driver , Windows 2000 17 to 18 Adobe P ostScript printer driver , Windows 95/98/M e 1 to 2 Adobe P ostScript printer driver , Windows NT 4.
81 Index P ostScript printer driver for Mac OS 54 for Windows xii installing 73 to 74 version 8.5 xiii Windows 2000 17 to 18 Windows 95/98/M e 1 to 2 Windows NT 4.0 17 to 18 P ostScript printer driver for Mac OS installing 54 PPD copying files for Windo ws applications 51 overview xi selecting PPD 78 printing Windows NT 4.
Copyright © 200 1 Electronics For Imaging. ALL RIGHTS RESERVED IN-A-334 1-1, KANDA NISHIKI-CHO, CHIYODA-KU, TOKYO, 101-8442, JAPAN.
デバイスToshiba e Studio45/35の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba e Studio45/35をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba e Studio45/35の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba e Studio45/35の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba e Studio45/35で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba e Studio45/35を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba e Studio45/35の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba e Studio45/35に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba e Studio45/35デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
