TP-LinkメーカーTL-WPA4230Pの使用説明書/サービス説明書
ページ先へ移動 of 47
TL-WP A4230P A V500 Passthrough Powerline WiFi Extender REV1.0.0 191001 1081.
COPYRIGHT & TRADEMARKS S pecifications ar e subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of their respective holders.
FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digit al device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa tion.
Canadian Compliance St atement This device complies with Industry Canada license-exempt RSS standard(s) . Operation is subject to the following two conditions: (1) This device may not cause interference, and (2)This device must accept any interference, incl uding interference that may cause undes ired operation of the device.
Продукт сер тифік овано згідно с правилами системи Ук р С Е П РО на відповідність вимогам норма тивних док ументів та вимогам , що пере дба чені чинними законодав чими ак тами Ук р а ї н и .
TP-LINK TECHNOLOGIES CO., L TD DECLARA TION OF CONFORMITY For the following equipment: Product Description: A V500 Passthro ugh Powerline WiFi Extender Model No.
Import ant Safety Instructions 1. Do not open this product or attempt to servic e it; it may expose you to dan gerous high voltage or other risks. 2. Do not operate this product near water . 3. Do not place or operate this produc t near a radiator or a heat register .
CONTENTS Chapter 1 Introduction ...................................................................................................... 1 1.1 System Requirement ...........................................................................................
Chapter 4 Connecting to Wireless Network ................................................ 29 4.1 In Windows 8 ................................................................................................................. 29 4.2 In Windows 7 .......
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 1 Chapter 1 Introduction Congratulations on your purchase of this outst anding A V500 Passthrough Powerline WiFi Extender .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 2 Chapter 2 Hardware Connection 2.1 Before You Begin Please read this User Guide carefully before inst alling and using the equipmen t. The operating distance or range of your wireless connection varies si gnificantly based on the phy sical placement of the powerline extender .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 3 2.2 LED Indicator The LED indicator displays inform ation about the de vice’s status. LEDs Name Statu s Indication On The device is on. Off The device is off. Power LED Blinking The device is in the pairing procedure.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 4 2.3 Physical Interface Here displays the physical items on this device. Integrated Electrical Socket Wi-Fi/Wi-Fi Clone Button Power Plug Ethernet Ports Reset Button Pair Button Item Description Wi-Fi/Wi-Fi Clone Button Press the button for 2 seconds to start Wi-Fi Clone.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 5 2.4 Hardware Connection Please first make sure that your PC can successfu lly access the Internet via the router .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 6 The hardware connection mec hanism is shown bel ow: As soon as the powerline devices are connected following th e step s above, a powerline network is available.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 7 2.5 Wi-Fi Clone Button for Super Range Extension Wi-Fi Clone button is used for c opying the wireless settings (including SSID and wireless password) from the front wireless router .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 8 Note: If you want to establish a secure and sep arate wirele ss network from the wireless router , please refer to 3.4.2 Wireless Security to set a dif ferent SSID and passw ord for your powerline extender .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 9 Chapter 3 Configure the Device This chapter describes how to configure your extender via th e web-base d management page.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 10 2. Find the model to be configured and click Connect to log in to the web-based management utility .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 11 Note: If the above screen does not prompt, it means that your web browser has been set to a proxy . Go to T ools >Internet Options>Connecti ons>LAN Settings , in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 12 3.2 Status The Status page displays the powerline extender ’s current st atus and configuration. All information is read-only . Figure 3-6 S tatus Firmware Version - This field displays the current firmwa re ver sion of the powerline extender.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 13 Wireless - This field displays the current settings or information for wireless. They can be configured on the Wireless → Wireless Settings p age. Wireless Radio - Indicates whether the wireless radio f eature of the powerline extender is enabled or disabled.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 14 area network just through a few settings. Wireless Setti ngs is used for the confi guration of some basic parameters of the powerline extender . Wireless Security provides three different security types to secure your data and thus providing greater security for y our wireless network.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 15 When you select your local region from the pull-down list, click the Save button , then the Note Dialog appears. Click OK . Note Dialog Channel - This field determines which operating frequency will be used.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 16 Figure 3-10 Wireless Security Disable Secu rity - Check this radio button to disable wirele ss security . If disabled, the wireless stations will be able to connect this device without encryption.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 17 WP A/WP A2 - Select WP A/WP A2 based on Radius Server . Figure 3-12 WP A/WP A2 Ve r s i o n - Y ou can select one of following versions. Automatic - Select WP A or WP A2 automatically based on the wi reless station's capability and request.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 18 Key T ype - Y ou can select the WEP key length ( 64-bit , or 128-bit ) for encryption.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 19 MAC Address - Enter the wireless station's MAC addr ess that you want to control. Description - Give a simple description of the wireless station. Statu s - Select a status for this entry , either Enabled or Disabled .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 20 4. Click the Add New ... button and enter the MAC address 00-0A-EB-00-07-BE in the MAC Address field, enter Wireless S tation A in the Description field and select Enabled in the Statu s pull-down list.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 21 DTIM Interval - Determines the interval of the Deliver y Traffic Indication Message (DTIM). You can specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 22 3.5 Powerline There are two submenus under the Powerline menu: Netw ork Settings and St ation Settings . Click any of them, and you will be able to configure the c orresponding functi on. The detailed explanations for each submenu are provided below .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 23 Figure 3-20 S tation Settings MAC Address - The rem ote station's MAC addres s. The value can not be changed. Device Pass word - The security ID of remote station. Device Name - The name used for i dentifying a station.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 24 Figure 3-22 Add a new station Click the Refresh button to update the curr ent connected stations. Click the Next button to go to the next page and click the Previous butto n to return to the previous page.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 25 Figure 3-24 Firmware Upgrade New firmware versi ons are posted at http://www .tp-link.com and can be downloaded for fr ee. Firmware V ersion - Here displays the current firmware version.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 26 3.6.2 Factory Defaults Selecting S ystem T ools > Factory Default s allows you to restore the factory default settings for the device on the screen shown in Figure 3-25 . Figure 3-25 Restore Factory Defaults Click Restore to reset all configuration se ttings to their default values.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 27 3.6.4 Reboot Selecting S ystem T ools > Reboot allows you to reboot the de vice on the screen shown in Figure 3-27 . Figure 3-27 Reboot the device Click the Reboot button to reboot the device.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 28 3.6.6 System Log Selecting S ystem T ools > System Log allows you to query the Logs of the device on the screen shown in Figure 3-29 . Figure 3-29 System Log The device can keep logs of all tr affic.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 29 Chapter 4 Connecting to Wireless Network The default SSID is TP-LINK_××××××. (×××××× stand fo r the last six unique numbers of the WLAN MAC which can be found on the label at the bottom of the devi ce.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 30 4. Y ou have joined the hom e network and can surf the Internet now . 4.2 In Windows 7 Windows 7 users may use the built-in wi reless utility . Follow the steps below . 1. Click the icon at the bottom of your desktop, select the SSID of TL-WP A4230P and then click Connect .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 31 Figure 4-1 2. Input the network key and then click OK . Figure 4-2 Note: If your network is an unsecured network, you will not be prompted to input the network key . 3. Y ou have joined the hom e network and can surf the Internet now .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 32 Figure 4-3 4.3 In Windows Vista Windows Vista users may use the built-in wireless utility . Follow the steps below . 1. Right-click the icon at the bottom of your screen, then click Connect to a net w ork .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 33 Figure 4-5 3. Input the netwo rk key and then click OK . Figure 4-6 Note: If your network is an unsecured network, you will not be prompted to input the network key . 4. Y ou have jo ined the home network and can surf the Internet now .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 34 Figure 4-7 4.4 In Windows XP Windows XP users may use the built-in wi reless utility . Follow the steps below . 1. Click the icon at the bottom of your desktop, select the SSID of TL-WP A4230P and then click Connect .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 35 Figure 4-9 Note: If your network is an unsecured network, you will not be prompted to input the network key .
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 36 Chapter 5 Pair Button & Reset Button 5.1 Pair (Secure with 128 bits-AES) The Homeplug A V standard uses 128-bit AES (Advanc ed Encryption S tandard) to safely transmit data between powerline dvices.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 37 5.3 Reset To reset the powerline device ： Press and hold the Reset button more than 5 seconds, and then release the button. Y ou will see all LEDs begin to flash. At this moment, the default settings have been restored.
TL-WP A423 0P A V500 Passthrough Pow erline W iFi Extender 38 Appendix A: T roubleshooting Guide 1. The Power LED does not light up. Ans. Check the following: 1) Make sure that the powerline extender is properly pl ugged into a power outlet. 2) Make sure the power outlet is active (worki ng) by plugging another electric device into it.
デバイスTP-Link TL-WPA4230Pの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
TP-Link TL-WPA4230Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTP-Link TL-WPA4230Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。TP-Link TL-WPA4230Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。TP-Link TL-WPA4230Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
TP-Link TL-WPA4230Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTP-Link TL-WPA4230Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、TP-Link TL-WPA4230Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTP-Link TL-WPA4230Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
