Tyan ComputerメーカーS2665の使用説明書/サービス説明書
ページ先へ移動 of 40
1 http://www.TYAN.com Thunder i7505 /// S2665 Revision 1.02 Copyright © TYAN Computer Corporation, 2002. All rights reserved. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp.
2 http://www.TYAN.com Table of Co ntents Before you begin… Chapter 1: Introduction 1.1 Congratulations 1.2 Hardware Specifications Chapter 2: Board Installation 2.0 Board Image 2.1 Board Parts, Jumpers and Connectors 2.2 Jumper and Connector Settings 2.
3 http://www.TYAN.com Check the box contents! The retail motherboard package should contain the following: 1x Thunder i7505 S2665 1x 34 - Pin floppy drive cable 1x Ultra160/320 LVD SCSI cable (if opti.
4 http://www.TYAN.com Chapter 1: Introduction 1.1 – Congratulations! You are now the owner of one of the most advanced dual Intel Xeon processor solutions available: the Thunder i7505 S2665.
5 http://www.TYAN.com Integrated PCI IDE § Provides two PCI bus master channels for up to four Enhanced IDE devices § Supports for UDMA 33/66/100 IDE driv es and ATAPI compliant devices § Supports up to four Enhanced IDE devices Integrated I/O § Six USB 2.
6 http://www.TYAN.com Chapter 2: Board Installation Installation You are now ready to install your motherbo ard. The mounting hole pattern of the Thunder i7505 S2665 matches the EEB V3.0 specification. Before continuing with installation, confirm that your chassis supports a standard EEB V3.
7 http://www.TYAN.com 2.0 – Board The following is an image of the S2665. This picture is represe ntative of the latest board revision available at the time of publishing. The board you receive may or may not look exactly like the above picture. The following page includes details on the vital components of this motherboard.
8 http://www.TYAN.com 2.1 – Board Parts, J umpers and Connectors This diagram is representative of the latest board revision available at the time of publishing.
9 http://www.TYAN.com 2.2 – Jumper and Connector Settings Jumper / Connector Function Settings J8 AUX Audio Connector J10 Enable/Disable Onboard Intel 82540EM GbE NIC Open : Enable (Default) Close: .
10 http://www.TYAN.com 2.3 – AUX Audio Connect or (J8) and CD Audio Connector (J16) J 8 (AUX Audio connector) Connects to internal audio sources such as TV tuner, MPEG, or other similar cards J16 (CD Audio connector) Connects to a CD - ROM drive via an optional CD audio cable 2.
11 http://www.TYAN.com 2.6 – PS/2 ACPI Jumper (J12) pin - 3 CLOSE Pins 1 and 2 (Default) To disable PS/2 devices’ ACPI wake up function pin - 3 C LOSE Pins 2 and 3 To enable PS/2 devices’ ACPI wake up function 2.
12 http://www.TYAN.com 2.9 – Disable Slot - B and Slot - C PCI - X Capability Jumper (J31) OPEN (Default) To enable PCI - X capability on Slot - B and Slot - C CLOSE To disable PCI - X capability on Slot - B a nd Slot - C Onboard SCSI chip PCI - X capability will be disabled due to sharing of the same bus 2.
13 http://www.TYAN.com 2.12 – IEEE 1394 Connector (J66) Connects to a 1394 device via an optional 1394 cable 2.13 – LCD Connector (J69) Connects to a LCD display via an optional cable 2.
14 http://www.TYAN.com Pin - 1 Intrusion cable detection (low asserted) Pin - 2 Intrusion detection (low asserted) Pin - 3 GND 2.16 – Front Panel USB Header (J73) Signal Descriptio n Pin # Pin # Sig.
15 http://www.TYAN.com 2.17 – Front Panel Connector (J74) Signal Descripti on Pin # Pin # Signal Description Sleep LED “ — “ 1 2 Speaker “ — “ Sleep LED “ + “ 3 4 Key Key 5 6 GND Pow.
16 http://www.TYAN.com 2.20 – Mounting the Motherboard Before installing your motherboard, make s ure your chassis has the necessary motherboard support studs installed. These studs are usually manufacturer pre - installed, metal and are gold in color.
17 http://www.TYAN.com Make sure that the memory you have is compatible with the motherboard as well as the processor. For example, DDR200 and DDR266 memory modules can be used for FSB=400MHz Intel Xeon processor but only DDR266 memory modules can be used for FSB=533MHz Intel X eon processor.
18 http://www.TYAN.com 2.22 – Installing the Processor(s) and Heatsink(s) Your Thunder i7505 S2665 supports the latest processor technologies from Intel.
19 http://www.TYAN.com The following diagram will illustrate how to install the most common heatsi nks: a. Align the heatsink mounting bracket to the holes around the processor socket b. Insert Black securing peg into bracket holes c. Insert White locking peg into Black securing peg d.
20 http://www.TYAN.com Finishing Installing the Heatsink After you finish installing the heatsink onto the processor and socket, attach the end wire of the fan (which should already be attached to the heatsi nk) to the motherboard. The following diagram illustrates how to connect fans onto the motherboard.
21 http://www.TYAN.com 2.24 – Connecting External Devices The following diagrams will de tail the rear port stack for this S2665 motherboard: a. Audio Port Line In Jack Connects to external devices .
22 http://www.TYAN.com 2.25 – Installing the Power Supply There are three power connectors on your Thunder i7505 S2665. By default, the Thunder i7505 S2665 requires that you have an EPS12V power supply that has a 24 - pin and an 8 - pin power connector.
23 http://www.TYAN.com 2.26 – Attaching IDE and Floppy Drive Cables Attaching IDE drive cabling is simple. These cables are “keyed” to only allow them to be connected in the correct manner. Tyan motherboards have two on - board IDE channels, e ach supporting two drives.
24 http://www.TYAN.com 2.27 – Finishing Up Congratulations on making it this far! You’re finished setting up the hardware aspect of your computer. Before closing up your chassis, make sure that all cables and wires are connected properly, especially IDE cables and jumpers.
25 http://www.TYAN.com Chapter 3: BIOS 3.0 – BIOS Setup Utility With the BIOS setup utility, you can modify BIOS settings and control the special features of your computer. The setup utility uses a number of menus for making changes and turning the special features on or off.
26 http://www.TYAN.com 3.1 – BIOS Menu Bar The menu bar at the top of the windows lists these selections: Main To configure basic sys tem setups Advanced To configure the chipset features Security T.
27 http://www.TYAN.com 3.3 – BIOS Main Menu BIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help BIOS Version 1.00.xx 4 Enable ACPI [Yes] 4 Installed OS [Win2000/XP] 4 Reset .
28 http://www.TYAN.com 3.4 – BIOS Advanced Menu BIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help 4 BIOS Event Log and Hardware Monitor 4 Processors 4 Chipset 4 Floppy Dis.
29 http://www.TYAN.com 3.4.4 – IDE Devices Sub - Menu Feature Option Description Primary/Secondary Master Auto User ATAPI Removable CD - ROM None Primary/Secondary Slave Auto User ATAPI Removab le C.
30 http://www.TYAN.com 3.4.6 – In tegrated SCSI / Network / USB / Audio /1394 Controller Sub - Menu Feature Option Description Integrated PCI Device Enabled Disabled This setting determines whether the integrated PCI device is activated.
31 http://www.TYAN.com 3.5 – BIOS Security Menu BIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help 4 Set User Password 4 Clear All Passwords 4 Clear Supervisor Password 4 C.
32 http://www.TYAN.com 3.7 – BIOS Boot Menu BIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help 4 Quick Boot Mode 4 Display Option ROM Message 4 Default P rimary Video Adapt.
33 http://www.TYAN.com 3.8 – BIOS Exit Menu BIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help 4 Exit Saving Changes 4 Exit Discarding Changes 4 L oad Setup Defaults 4 Disc.
34 http://www.TYAN.com Chapter 4: Diagnostics Note: if you experience problems with setting up your system, always check the following things in the following order: CPU, Memory, Video By checking these items, you will most likely find out what the problem migh t have been when setting up your system.
35 http://www.TYAN.com Appendix I: Glossary ACPI (Advanced Configuration and Power Interface): a power management specification that allows the operating system to control the amount of power distribut ed to the computer’s devices. Devices not in use can be turned off, reducing unnecessary power expenditure.
36 http://www.TYAN.com Closed and open jumpers: jumpers a nd jumper pins are active when they are “on” or “closed”, and inactive when they are “off” or “open”. CMOS (Complementary Metal - Oxide Semiconductors): chips that hold the basic startup information for the BIOS.
37 http://www.TYAN.com IDE (Integrated Device/Drive Electronics): a simple, self - contained HDD interface. It can handle drives up to 8.4 GB in size. Almost all IDEs sold now are in fact Enhanced IDEs (EIDEs), with maximum capacity determined by the hardware controller.
38 http://www.TYAN.com RAM (Random Access Memory): technically refers to a type of memory where any byte can be accessed without touching the adjacent data and is often referred to the system’s main memory. This memory is available to any program running on the computer.
39 http://www.TYAN.com Technical Support If a problem arises with your system, you should turn to your dealer for help fi rst. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains.
40 http://www.tyan.com Notice for the USA Compliance Information Statement (Declaration of Conformity Procedure) DoC FCC Part 15: This device complies with part 15 of the FCC Rule s Operation is subje.
デバイスTyan Computer S2665の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Tyan Computer S2665をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTyan Computer S2665の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Tyan Computer S2665の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Tyan Computer S2665で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Tyan Computer S2665を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTyan Computer S2665の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Tyan Computer S2665に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTyan Computer S2665デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。