VeronaメーカーCTG212FDの使用説明書/サービス説明書
ページ先へ移動 of 20
✓ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. ✓ WHA T TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building.
2 Dear Customer , Thank you for having pur chased and given your prefer ence to our pr oduct. The safety pr ecautions and recommendations r eported below ar e for your own safety and that of others. They will also pr ovide a means by which to make full use of the featur es offered by your appliance.
3 IMPORT ANT PRECAUTIONS AND RECOMMENDA TIONS ✓ After having unpacked the appliance, check to ensure that it is not damaged. If you have any doubts, do not use it and consult your supplier or a professionally qualified technician. ✓ Packing elements (i.
4 COOKING POINTS 1. Semirapid burner (SR) - 6,000 BTU/hr 2. Rapid burner (R) - 10,000 BTU/hr CONTROL P ANEL DESCRIPTION 3. Rapid burner (R) control knob (2) 4. S emirapid burner (SR) control knob (1) Note: - The electric gas-lighting device is incorporated into the knobs.
5 Fig. 2.3 Fig. 2.2 Fig. 2.1 using the gas cooktop CHOICE OF BURNER (fig. 2.3) The symbols printed on the panel beside the gas knobs indicate the correspondence between the knob and the burner . The most suitable burner is to be chosen according to the diameter and volume capac- ity of the container to be warmed.
6 Do not use steam jet cleaners because the humidity could infiltrate into the appliance making it dangerous. GENERAL RECOMANDA TION ✓ Before you begin cleaning you must ensur e that the hob is switched off. It is advisable to clean when the appliance is cold.
7 BURNERS AND GRIDS ✓ These parts can be removed and cleaned with appr opriate products. ✓ After cleaning, the burners and their flame distributors must be well dried and correctly r eplaced.
8 W ARNING! THIS APPLIANCE HAS TO BE INST ALLED BY A QUALIFIED INST ALLER. Improper installation, adjustment, alteration, services, or maintenance can cause injury or pr operty damage. Consult a qualified installer , service agent, or the gas supplier .
9 GENERAL INFORMA TION 1. Installation must conform with local codes or , in the absence of local codes, with the National Fuel Gas Code , ANSI Z223.1-Latest Edition.
10 min 11 ” 13/32 (290 mm) 30 ” (762 mm) 18 ” (457 mm) min 4 ” (102 mm) from cut-out max 13 ” (330 mm) min 11 ” 13/32 (290 mm) 30 ” (762 mm) 18 ” (457 mm) min 4 ” (102 mm) from cut-out max 13 ” (330 mm) Fig.
11 Fig. 4.3 A A A A 20 mm min. 40 mm max. B C A Fig. 4.4 F ASTENING THE COOKTOP (fig. 4.3 - 4.4) Each cooktop is supplied with a set of tabs and screws to fasten it on units with a working surface from 2 to 4 cm deep. The kit includes 4 tabs “ A ” and 4 self-threading scr ews “ B ” .
12 Gas supply line Shutoff valve “ open ” position To cooktop Fig. 5.1 All gas connections must be made according to national and local codes. This gas supply (service) line must be the same size or greater than the inlet line of the appliance. Sealant on all pipe joints must be resistant to te action of LP/Pr opane gas.
13 PRESSURE REGULA TOR INST ALLA TION To cooktop UNLOCK LOCK LOCK T o cooktop LOCK Arrow STEP 1 The elbow connection can be turned in the direction requir ed after the manifold female pipe fitting has been slackened by using a wrench.
14 To mains connection To cooktop Manifold test point pressure 1/8 ” NPT 1/2 ” G cylindrical (ISO 228-1) male Cooktop manifold Manifold female pipe fitting Elbow connection Connector Pressure .
15 b) Any conversion requir ed must be performed by your dealer or a qualified licensed plumber or gas service company . Please provide the service person with this manual before work is started on the cooktop. (Gas conversions ar e the responsibility of the dealer or end user .
16 1 2 NATURAL GAS REGULATION LP/PROPANE REGULATION A SETTING THE PRESSURE REGULA TOR (fig. 5.5) 1. Unscrew the r egulator cover; 2. Unscrew the A component, r everse and screw it according to the LP/PROP ANE regulation. CONVERSION TO LP/PROP ANE GAS Every cooktop is provided with a set of injectors for the various types of gas.
17 REGULA TING THE BURNER MINIMUM SETTING When switching from one type of gas to another , the minimum flow rate must also be correct: the flame should not go out even when passing suddenly fr om maximum to minimum flame.
18 electrical connection W ARNING Electrical Shock Hazard Plug into a grounded 3-prong outlet. Do not remove ground prong. Do not use an adapter. Failure to follow these instructions can result in death, fire, or electrical shock.
19 Wiring diagram key A Ignition coil PA Ignition switches group M T erminal block CA Igniter Fig. 6.2 NL PA A CA M CA WIRING DIAGRAM .
Cod. 1102742 ß 2 The manufacturer cannot be held responsible for possible inaccuracies due to printing or transcription err ors in the present booklet.
デバイスVerona CTG212FDの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Verona CTG212FDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVerona CTG212FDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Verona CTG212FDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Verona CTG212FDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Verona CTG212FDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVerona CTG212FDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Verona CTG212FDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVerona CTG212FDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。