WacomメーカーDTF-521の使用説明書/サービス説明書
ページ先へ移動 of 52
P en Displa y Installation & User’ s Guide f or DTF-521/ PL-521 series www .wacom.com DTF521_Manual.fm Page -1 Tuesday, February 28, 2006 10:36 AM.
(This page intentionally left blank.) DTF521_Manual.fm Page 0 Tuesday, February 28, 2006 10:36 AM.
Introduction and overview page 1 INTRODUCTION AND OVERVIEW The W acom ® DTF-521/PL-521 pen displa y combines the benefits of an LCD monitor with the control, comf or t, and productivity of W acom’ s cordless, battery-free pen technology .
Precautions on use and handling page 2 PRECAUTIONS ON USE AND HANDLING Be sure to f ollow all instructions, cautions, and w arnings found within this guide.
Precautions on use and handling page 3 Handling W ARNING High V oltage. Do not open or disassemble the DTF-521/PL-521 pen displa y . There is a risk of electrical shock when the casing is open. This will also void your warranty and W acom shall hav e no responsibility to repair or replace the product.
Precautions on use and handling page 4 C AUTION Do not expose the DTF-521/PL-521 to high v oltage electrostatic disc harges or to a build-up of an electr ostatic charge on the LCD screen. This may result in a temporary discoloration and blotching of the LCD monitor .
Contents page 5 CONTENTS Introduction and ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Precautions on use and handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Ph ysical location . . . . . .
Unpacking your pen display page 6 UNPACKING YOUR PEN DISPLAY P ackage contents Y our product came with the f ollowing items: Notes: Images are not shown to scale . Some product configurations may come with diff erent pens having no side s witch. Some configurations may include additional CDs containing application softw are.
Pen display components page 7 PEN DISPLAY COMPONENTS The LCD monitor and tablet sensor function as an integ rated input and output de vice. The LCD monitor suppor ts resolutions up to 1024 x 768 pixels at 16.2 million colors . The tablet sensor reports pen coordinates, pressure , and switch inf or mation.
Pen display components page 8 Rear view Next step: Installation . See page 9. Video, USB, and power connector s Kensington security slot Allows easy attachment of a security cable.
Installation page 9 INSTALLATION System requirements Bef ore installing the DTF-521/PL-521 pen display , make sure your computer meets the f ollowing system requirements: • PC. Windows XP , XP x64, 2000, Me, or 98SE. VGA video connector , av ailable USB por t, and CD-ROM driv e.
Installation page 10 Step 1: LCD monitor installation In the first stage of the installation process, the DTF-521/PL-521 is installed as a monitor on y our system. As you work through the first stage of the installation process, please ref er to the LCD monitor cabling diag ram on the f ollowing page when making cab le connections.
Installation page 11 LCD monitor cabling diagram DTF-521/PL-521, rear view – B – DC IN (12V) – A – V GA cable Video card Rear panel of your computer ANALOG RGB OUT Do not attach the USB data cable until instructed to do so .
Installation page 12 • T ur n on the DTF-521/PL-521. The power LED will light orange . • Ne xt, tur n on your computer . Windo ws XP , XP x64, and 2000: The DTF-521/PL-521 will automatically install as a default monitor . Windo ws 98SE and Me : The N EW H ARDWARE W IZARD will display .
Installation page 13 Step 2: P en tablet installation USB cable installation Plug the square end of the USB cable into the DTF-521/PL-521 port labeled USB. Plug the other end into an av ailable USB por t on your computer or on a USB hub attached to y our computer .
Installation page 14 Software installation T o install the tablet software: • Sav e your work and close all open applications before installing the tab let software. T emporar ily disable an y virus protection programs. • Inser t the W acom P en T ablet Driv er CD into your computer’ s CD-ROM drive .
Working with your pen display page 15 WORKING WITH YOUR PEN DISPLAY As you w ork with the DTF-521/PL-521 pen display y ou can rest your hand lightly on the displa y screen, just as if it were a dra wing board or sheet of paper .
Working with your pen display page 16 Using the pen As you w ork with the DTF-521/PL-521 you can rest your hand lightly on the displa y screen, just as if it were a dra wing board or sheet of paper . The W acom pen is cordless, battery-free, and sensitiv e to the pressure you e xer t upon it.
Working with your pen display page 17 P en operations The basic methods of working with the pen are as f ollows: P ointing and selecting: Mov e the pen abov e the DTF-521/PL-521 displa y screen to position the screen cursor . The pen tip needs to be within 5 mm (0.
Customizing page 18 CUSTOMIZING After you master the basics of using y our pen on the DTF-521/PL-521 pen displa y , you ma y want to customize the w ay the pen w orks. The P en T ablet control panel makes it easy to customiz e your pen displa y and pen.
Customizing page 19 Contr ol panel overvie w Open the P en T a blet control panel to customiz e your product. Exper iment with diff erent settings to find what works best f or you. Any changes you mak e will take eff ect immediately , but y ou can alwa ys click D EFAULT to return to the factory settings.
Customizing page 20 Calibrating y our pen display Y ou will need to calibrate the DTF-521/PL-521 pen displa y tablet in order to align the screen cursor position with the position of the pen on the displa y screen. This is required to adjust f or parallax caused by the acrylic display screen co ver and coating.
Customizing page 21 Contr ol panel details Adjusting double-c lick Double-clic king with the pen tip can be made easier by e xpanding the tap area that accepts a double- click (the doub le-click distance), or b y using the pen’ s side switch to automatically doub le-click when pressed.
Customizing page 22 K EYSTROKE .... Enables y ou to simulate k eystrok es. Selecting this option displays the D EFINE K EYSTROKE dialog bo x where you can enter a k eystrok e or ke ystroke sequence to pla y back at the press of a button. M ODIFIER ...
Customizing page 23 M ODE T OGGLE .... T oggles between the pen tracking mode (pen mode) and mouse mode . The tracking mode you select determines the relationship between pen mov ement and cursor movement.
Customizing page 24 Adjusting the LCD monitor Factory presets, auto-sync, and user settings Factory presets: F or optimal display quality , set your video card to the DTF-521/PL-521’ s native resolution of 1024 x 768 pix els. See page 43 for signal specifications.
Customizing page 25 When you open the On Screen Displa y , the follo wing menu option icons are displa y ed: C ONTRAST . Select to increase or decrease image contrast. B RIGHTNESS . Select to increase or decrease image brightness. P HASE . Select to reduce or eliminate horizontal distor tion lines.
Customizing page 26 B ACKLIGHT . Select to increase or decrease the backlight brightness le vel. C OLOR . Provides color temperature settings f or 9300˚, 6500˚, and 5000˚ K elvin. D IRECT displa ys the received signal as it is without any adjustment.
Customizing page 27 Adjusting pitch and phase Some computers and video cards ma y not allow the auto-sync function to fully work when the DTF-521/PL-521 is first connected. If some por tion of text appears b lurred, adjust pitch and phase by f ollowing the procedure below .
Customizing page 28 P ower saving The DTF-521/PL-521 conf or ms to VESA and ENERGY ST AR ® power sa ving guidelines. When using the DTF-521/PL-521 with a Displa y P ower Management Signaling (DPMS) compliant computer or video card, the displa y will automatically comply with the below pow er saving par ameters.
Troubleshooting page 29 TROUBLESHOOTING Most of the time your pen displa y tablet will work flawlessly . But if you are ha ving trouble , Wacom recommends you do the f ollowing: 1. If the DTF-521/PL-521 pen displa y does not function properly , refer to the troub leshooting section below .
Troubleshooting page 30 3. V erify that the tablet and pen are working: • Press the pen tip against the displa y and verify that the status LED lights blue . • If the LED does not light, v er ify that the DTF-521/PL-521’ s USB cable is plugged into an activ e USB por t.
Troubleshooting page 31 Displa y troub leshooting If you encounter prob lems with the DTF-521/PL-521 displa y , refer to the f ollowing tab les; your prob lem ma y be described here and you can tr y the solution off ered.
Troubleshooting page 32 V GA prob lems The image appears multiple times on the displa y . • Do not e xtend the video cable. Do not use an input selector s witch box. When a still image is displa yed f or a long period of time without refreshing the screen, an after- image remains f or a shor t per iod of time.
Troubleshooting page 33 P en tablet troub leshooting If you encounter prob lems with the DTF-521/PL-521 pen displa y , refer to the f ollowing tab les. Y our problem ma y be descr ibed here, and y ou can tr y the solution offered. Be sure you ref er to the DTF-521/PL-521 Read Me file f or the latest information.
Troubleshooting page 34 Y ou notice a dela y at the beginning of pen strokes . T r y decreasing the D OUBLE C LICK D ISTANCE . See Adjusting double- click on page 21. Y ou hav e to press hard with the pen when clicking or dra wing. Open the P en T ablet control panel and go to the P EN tab .
Troubleshooting page 35 When using the pen displa y tablet on a m ultiple monitor system, you cannot use the pen to control the other monitor(s). Y ou can use your pen to control the other monitors in mouse mode . T o use mouse mode, first set the pen’ s DuoSwitch to M ODE T OGGLE .
Troubleshooting page 36 Windows-Specific Pr oblems After changing right- and left-handed settings in the computer’ s mouse control panel, the pen tip no longer functions properly . Restar t Windows f or your W acom tool settings to be correctly recognized.
Troubleshooting page 37 Macintosh-Specific Prob lems At star tup, a dialog bo x appears telling you that either the driver f ailed to load or the tablet pref erences hav e not yet been created.
Troubleshooting page 38 T echnical support options If you ha v e a problem with y our pen displa y , first check the appropriate Installation section in this guide to make sure the unit is installed correctly .
Troubleshooting page 39 Obtaining driver downloads W acom periodically updates the pen tablet software driv er to maintain compatibility with new products .
Appendix page 40 APPENDIX Caring f or y our pen display K eep the pen and your pen displa y LCD screen surface clean. Dust and dir t par ticles can stick to the pen and cause wear to the displa y screen surf ace. Regular cleaning will help prolong the life of y our LCD screen surf ace and pen.
Appendix page 41 Using an alternate mount or stand If you will be using the DTF-521/PL-521 pen displa y in an installation that requires the use of an alternate mounting platform, you can remo ve the adjustab le stand from the unit and mount the pen displa y onto any mount arm or stand conforming to the VESA 75 standard.
Appendix page 42 Uninstalling the DTF-521/PL-521 F ollow the appropriate procedure below to remov e the W acom tablet softw are and the DTF-521/PL-521 pen displa y from your system.
Appendix page 43 Pr oduct specifications General specifications LCD monitor Ph ysical dimensions (W x D x H) 344.0 x 300.0 x 49.0 mm (13.6 x 11.8 x 1.
Appendix page 44 P en tablet P ower adapter P en (model FP-320) Pur chasing parts and accessories T o purchase par ts and accessories, refer to the W acom pen displa y Read Me file and see who to call for your region. Y ou can also do the follo wing: T o purchase parts and accessories in the USA or Canada, call 1.
Appendix page 45 Radio and television interf erence The equipment described in this manual generates, uses , and can radiate radio-frequency energy . If it is not installed and used properly – that is, in strict accordance with applicable instructions – it may cause interf erence with radio and tele vision reception.
Appendix page 46 W arranty (W orldwide, Except for Eur ope , Africa and Middle East) Limited W arranty W acom warrants the product, to the original consumer purchaser , except f or the Software and co.
Appendix page 47 W arranty Ser vice in the U .S.A. and Canada T o obtain W arranty ser vice within the U .S. or Canada contact: W acom T echnical Suppor t Phone: 1.360.896.9833 F ax: 1.360.896.9724 E-mail: http://www .wacom.com/productsuppor t/email.cfm suppor t@wacom.
Appendix page 48 License and W arranty (Europe, Africa and Middle East) Software License Agreement Important Notice to Customers This product contains cop yrighted computer programs (“software”) which are the inalienab le intellectual proper ty of W acom Europe GmbH (“W acom”).
Appendix page 49 W acom shall hav e no responsibility to repair or replace the product if (a), in the opinion of W acom, the f ailure of the product has resulted from accident, abuse , misuse, neglige.
Appendix page 50 (This page intentionally left blank.) DTF521_Manual.fm Page 50 Tuesday, February 28, 2006 10:36 AM.
デバイスWacom DTF-521の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Wacom DTF-521をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWacom DTF-521の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Wacom DTF-521の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Wacom DTF-521で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Wacom DTF-521を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWacom DTF-521の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Wacom DTF-521に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWacom DTF-521デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
