BelkinメーカーF5D7632uk4v3000の使用説明書/サービス説明書
ページ先へ移動 of 108
2.4GHz • Wir eles s 802.11b Ethernet E Wir ed Mbps 10/100 Ethernet Gigabit E Wir ed Mbps 10/100/1000 Gigabit Ethernet Mbps 2.4GHz • Wir eles s 802.
3 T abl e of Contents 3 1 In tr od uc t io n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Prod uc t Featu re s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Ben efi ts of a H ome N et wor k .
3 Intr oduction 3 2 1 3 4 5 6 7 8 9 1 0 section Thank you for purchasing the Belkin ADSL Modem with Wireless G Router (the Router). In minutes you will be able to share your Inter net connection and network your computers with your new Router .
5 4 Intr oduction 5 4 Int eg r ate d 8 02 . 1 1g W ir el es s Ac ces s P oin t 802.11g is an exciting new wireless technology that achieves data rates up to 54Mbps, nearly five times faster than 802.
5 Intr oduction 5 2 1 3 4 5 6 7 8 9 1 0 section Ben efits of a Hom e Net work By following our simple setup instructions, you will be able to use your Belkin home network to: • Share one high-speed .
7 6 Make Sur e Y ou Have the F oll owing 7 6 Pac kag e Con tent s • ADSL Modem with Wireless G Router • RJ11 T elephone Cord - Gray • RJ45 Ethernet Networking Cable — Y ellow • USB 1.0 Cable — Blue • ADSL Microfil ter* • Power Adapter • User Manual CD *ADSL microfilter varies by country .
7 Knowing your Router 7 AD SL L ED Powe r L ED L AN S t at u s LE D (1- 4 ) W i re l es s L AN ( WL A N ) St a tu s LE D In te r ne t LE D The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility .
9 8 Knowing your Router 9 8 3. W L AN St at us L ED The WLA N Stat us LED is so lid GR EEN whe n you en able the wir eles s LAN fun ctio n. It fl ashes whe n the Ro uter is tr ansm itt ing or re ceiv ing dat a wir eles sly .
9 Knowing your Router 9 section 2 1 3 4 5 6 7 8 9 1 0 Ba ck P ane l The following figure illustrates the rear panel of your Router . 6. DSL Line This port is for connection to your ADSL line. Connect your ADSL line to this port. 7. Po wer Plu g Connect the included 15V DC power supply to this inlet.
11 10 Connecting your Router 11 10 Po sitio ning you r Rou ter Y our wireless connection will be stronger the closer your computer is to your Router .
11 Connecting your Router 11 section 2 1 3 4 5 6 7 8 9 1 0 Con necti ng you r ADSL Li ne Connection for the Router to the ADSL line varies by country and region.
13 12 Connecting your Router 13 12 3.
13 13 section 2 1 3 4 5 6 7 8 9 1 0 3. T ur n on your computers. After your computers boot up, the LAN status LED on the front of the Router will be on for each port to which a wired computer is connected. These lights show you the connection and activity status.
15 14 Connecting your Router 15 14 3. The Setup Wizard will start automatically for express configuration (recommended) Click “Next” to continue. Connecting your Router 4. The first step is to select your country and ISP , and click “Next”. If your country and/or ISP is not listed, select “Other Country” or “Other ISP .
15 15 section 2 1 3 4 5 6 7 8 9 1 0 Connecting your Router 6. Now the Wireless LAN Setup screen will show . Y ou can connect to the Router via a wireless-LAN-enabled computer with the following defaul.
17 16 17 16 7. Double-check the settings shown on the following screen. Y ou can click “Back” to change the settings or click “Next” to confirm Note: Y ou can always restart the Setup Wizard or use the Navigation Menu on the left to change your setting.
17 17 section 2 1 3 4 5 6 7 8 9 1 0 1 2 Un derst andi ng the W eb-Ba sed Us er In terfa ce Th e h om e p ag e s how s y ou a q ui ck vi ew of th e R ou te r’ s st at us an d s et ti ng s. Al l ad va nc ed se tu p p ag es ca n b e r ea ch ed fr om th is pa ge .
19 18 Manuall y Configuring your Router 19 18 4 . Lo g i n / L o g o ut B ut to n T hi s b ut ton e n ab l e s y o u to lo g i n a n d o u t o f t he R ou t e r w it h th e p r e s s o f on e bu t to n . W h e n yo u ar e l o g g e d i nt o t h e R o ut e r , t hi s bu t to n wi ll ch a n ge to r e a d “ L og o u t ” .
19 Manuall y Configuring your Router 19 section 2 1 3 4 5 6 7 8 9 1 0 Cha nging LAN Sett ings All settings for the inter nal LAN setup of the Router can be viewed and changed here. L A N S et t ing s Clicking on the header of the LAN tab (A) will take you to the LAN tab’ s header page.
21 20 Manuall y Configuring your Router 21 20 3. D HCP S er ver The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically .
21 Manuall y Configuring your Router 21 section 2 1 3 4 5 6 7 8 9 1 0 5. L ea s e Ti me Lease time is the length of time the DHCP server will reserve the IP address for each computer .
23 22 Manuall y Configuring your Router 23 22 T o configure the Router with the settings that your ISP gave you, click “Connection T ype” (1) on the left side of the screen.
23 Manuall y Configuring your Router 23 section 2 1 3 4 5 6 7 8 9 1 0 Select the type of connection you use by clicking the radio button (1) next to your connection type and then clicking “Next”.
25 24 Manuall y Configuring your Router 25 24 1. Us e r N am e - Enter the user name. (Assigned by your ISP). 2 . P a s s wor d - Enter your password. (Assigned by your ISP). 3. Re t y pe P a s s wo rd - Confirm the password. (Assigned by your ISP). 4 .
25 Manuall y Configuring your Router 25 section 2 1 3 4 5 6 7 8 9 1 0 Set ting y our Con necti on T ype to Dyn ami c IP (148 3 Bri dged) This connection method bridges your network and ISP’ s network together . The Router will obtain IP address automatically from your ISP’ s DHCP server .
27 26 Manuall y Configuring your Router 27 26 2 . S ubn et M as k - Enter a subnet mask assigned by your ISP . 3. D ef au lt Rou te - Enter a default gateway IP address. If the Router cannot find the destination address within its local network, it will forward the packets to the default gateway assigned by your ISP .
27 Manuall y Configuring your Router 27 section 2 1 3 4 5 6 7 8 9 1 0 Leave the “Automatic from ISP” box checked. T o enter the DNS address settings, uncheck the “Automatic from ISP” box and enter your DNS entries in the spaces provided. Click “Apply Changes” (2) to save the settings.
29 28 Manuall y Configuring your Router 29 28 Set ting up the Router ’ s D y namic DNS Up date Client Y ou must register with DynDNS.org’ s free update service before using this feature. Once you have your registration, follow the directions below .
29 Manuall y Configuring your Router 29 section 2 1 3 4 5 6 7 8 9 1 0 Channel and S SID 1 . Changing the W irele ss Ne t work Na me (S SID) T o identify your wireless network, a name called the SSID (Service Set Identifier) is used. The default SSID of the Router is “belkin54g”.
31 30 Manuall y Configuring your Router 31 30 3. Using the W irele ss Mo de Switch Y our Router can operate in three different wireless modes: “Mixed (11b+11g)”, “11g Only”, and “11b Only”. The different modes are explained below . “Mixed (11b+11g)” Mode —In this mode, the Router is compatible with 802.
31 Manuall y Configuring your Router 31 section 2 1 3 4 5 6 7 8 9 1 0 Enc rypti on/S ecu rity Secur ing your W i- Fi Net wor k Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears.
33 32 Manuall y Configuring your Router 33 32 1 28 -Bit W EP As a result of 64-bit WEP’ s potential security weaknesses, a more secure method of 128-bit encryption was developed. 128-bit encryption includes a key length of 104 bits plus 24 additional bits of system-generated data (128 bits total).
33 Manuall y Configuring your Router 33 section 2 1 3 4 5 6 7 8 9 1 0 WPA-PSK (no s er ver) This method uses what is known as a Pre-Shared key as the Network key . A Network key is basically a password that is between eight and 63 characters long. It can be a combination of letters, numbers, or characters.
35 34 Manuall y Configuring your Router 35 34 Sharing the Same Net wor k Keys Most Wi-Fi products ship with security tur ned off. So once you have your network working, you need to activate WEP or WP A and make sure your wireless networking devices are sharing the same Network key .
35 Manuall y Configuring your Router 35 section 2 1 3 4 5 6 7 8 9 1 0 Note to Mac users: Original Apple AirPort® products support 64-bit encryption only . Apple AirPort 2 products can support 64-bit or 128-bit encryption. Please check your product to see which version you are using.
37 36 Manuall y Configuring your Router 37 36 3. Click “Apply Changes” to finish. Encryption in the Router is now set. Each of your computers on your wireless network will now need to be configured with the same security settings.
37 Manuall y Configuring your Router 37 section 2 1 3 4 5 6 7 8 9 1 0 Set ting WP A/ WP A2- PSK (no ser ve r) 1. Fr om the “Allowed Client T ype” drop-down menu, select “WP A/ WP A2”. 2 . For Authentication, select “Pre-shared Key” for typical home/SOHO use.
39 38 Manuall y Configuring your Router 39 38 5. Enter the waiting time after authentication failed in the “Quiet Period” filed. 6. Enter the IP address and port number of the radius server into the “Server -IP” and “Server -Port” fields. 7 .
39 Manuall y Configuring your Router 39 section 2 1 3 4 5 6 7 8 9 1 0 Con necti ng you r Compu ter to a Wir el ess Net wo rk that Req uir es a 64- Bit or 12 8-B it WEP Ke y 1. Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen.
41 40 Manuall y Configuring your Router 41 40 Con necti ng you r Compu ter to a Wir el ess Net wo rk that Req uir es WP A-P SK (no se rver ) 1. Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen. The “Advanced” button will allow you to view and configure more options of your wireless card.
41 Manuall y Configuring your Router 41 section 2 1 3 4 5 6 7 8 9 1 0 Con necti ng you r Compu ter to a Wir el ess Net wo rk that Req uir es WP A (wi th rad ius ser ver) 1. Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen.
43 42 Manuall y Configuring your Router 43 42 Set ting Up WP A for a Non- Belk in Wi re le ss Desk top an d Wir el ess No tebo ok Ca rd s For non-Belkin WP A Wireless Desktop and Wireless Notebook Car.
43 Manuall y Configuring your Router 43 section 2 1 3 4 5 6 7 8 9 1 0 Set ting Up Wind ows XP Wir el ess Net work Util ity to Use WP A-P SK In order to use WP A-PSK, ensure you are using Windows Wireless Network Utility by doing the following: 1. Under Windows XP , click “Start > Control Panel > Network Connections”.
45 44 Manuall y Configuring your Router 45 44 6. Select “TKIP” or “AES” under “Data Encryption”. This setting will have to be identical to the Router that you set up. 7 . T ype in your encryption key in the “Network Key” box. Imp or ta nt : Enter your Pre-Shared key .
45 Manuall y Configuring your Router 45 section 2 1 3 4 5 6 7 8 9 1 0 Adding A nother Net wor k Segment Wirele ssly Connecting a network switch or hub to the Access Point’ s RJ45 jack will allow a number of computers connected to the switch access to the rest of the network.
47 46 Manuall y Configuring your Router 47 46 Set ting up a Brid ge Betw een y our Rou ter and a Sec onda ry Ac ces s Poin t Bridging your Belkin Router to a secondary Access Point requires that you access the Router’ s Advanced Setup Utility and enter the MAC address of the Access Point in the appr opriate ar ea.
47 Manuall y Configuring your Router 47 section 2 1 3 4 5 6 7 8 9 1 0 7 . Check the box that says “Enable ONL Y specific Access Points to connect” (1). 8. In the field named “AP1” (3), type in the MAC address of your secondary Access Point. When you have typed in the address, click “Apply Changes”.
49 48 Manuall y Configuring your Router 49 48 Fir ewall Y our Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including: • IP Spoofing .
49 Manuall y Configuring your Router 49 section 2 1 3 4 5 6 7 8 9 1 0 Virtual Servers Virtual servers allow you to route external (Inter net) calls for services such as a web server (port 80), FTP server (Port 21), or other applications, through your Router to your inter nal network.
51 50 Manuall y Configuring your Router 51 50 Client IP Filters The Router can be configured to restrict access to the Inter net, email, or other network services at specific days and times. Restriction can be set for a single computer , a range of computers, or multiple computers.
51 Manuall y Configuring your Router 51 section 2 1 3 4 5 6 7 8 9 1 0 3. Click “OK” and then click “Apply Changes” to save your settings..
53 52 Manuall y Configuring your Router 53 52 URL Blocking T o configure the URL blocking feature, specify the websites (www .somesite. com) and or keywords you want to filter on your network.
53 Manuall y Configuring your Router 53 section 2 1 3 4 5 6 7 8 9 1 0 Follow these steps to add a schedule: 1. Click “Add Schedule Rule”. 2 . Y ou will see the following screen. 3. T o configure the schedule rule, specify the name, comment, start time, and end time that you want to filter on your network.
55 54 Manuall y Configuring your Router 55 54 Setting MAC Addres s Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access.
55 Manuall y Configuring your Router 55 section 2 1 3 4 5 6 7 8 9 1 0 DMZ (Demilitarized Zone) If you have a client PC that cannot run an Inter net application properly from behind the firewall, you can open the client up to unrestricted two-way Internet access.
57 56 Manuall y Configuring your Router 57 56 T o put a computer in the DMZ, enter the last digits of its IP address in the IP field and select “Enable”. Click “Apply Changes” for the change to take effect. If you are using multiple static WAN IP addresses, it is possible to select which WAN IP address the DMZ host will be directed to.
57 Manuall y Configuring your Router 57 section 2 1 3 4 5 6 7 8 9 1 0 Utilities The “Utilities” screen lets you manage different parameters of the Router and perform certain administrative functions. Restart Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly .
59 58 Manuall y Configuring your Router 59 58 Restor e Factory Defaults Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults.
59 Manuall y Configuring your Router 59 section 2 1 3 4 5 6 7 8 9 1 0 1. Click “Save”. A window called “File Download” will open. Click “Save”. 2 . A window will open that allows you to select the location in which to s a v e the configuration file.
61 60 Manuall y Configuring your Router 61 60 Restor e Pr evious Settings This option will allow you to restore a previously saved configuration. 1. Click “Browse”. A window will open that allows you to select the l o c a t i o n o f the configuration file.
61 Manuall y Configuring your Router 61 section 2 1 3 4 5 6 7 8 9 1 0 Checking for a New V ersion of Firmware The “Check Firmware” (1) button allows you to instantly check for a new version of firmware.
63 62 Manuall y Configuring your Router 63 62 Updating the Router’ s Firmwar e 1. In the “Firmware Update” page, click “Browse” (2). A window will open that allows you to select the location of the firmware update file. 2 . Browse to the firmware file you downloaded.
63 Manuall y Configuring your Router 63 section 2 1 3 4 5 6 7 8 9 1 0 4 . Y ou will be asked if you are sure you want to continue. Click “OK”. 5. Y ou will see one more message. This message tells you that the Router may not respond for as long as one minute as the firmware is loaded into the Router and the Router is rebooted.
65 64 Manuall y Configuring your Router 65 64 Changing the Login Time-Out Setting The login time-out option allows you to set the period of time that you can be logged into the Router’ s advanced setup interface. The timer starts when there has been no activity .
65 Manuall y Configuring your Router 65 section 2 1 3 4 5 6 7 8 9 1 0 Enabling Remote Management Before you enable this advanced feature of your Belkin Router , MAKE SURE YOU HA VE SET THE ADMINISTRA TOR P ASSWORD . Remote management allows you to make changes to your Router’ s settings from anywhere on the Inter net.
67 66 Manuall y Configuring your Router 67 66 Enabling/Disabling NA T (Network Addr ess Tr anslation) No te : This advanced feature should be employed by advanced users only . Before enabling this function, MAKE SURE YOU HA VE SET THE ADMINISTRA TOR P ASSWORD .
67 Manuall y Configuring your Router 67 section 2 1 3 4 5 6 7 8 9 1 0 Enabling/Disabling Auto Firmware Update This innovation provides the Router with the built-in capability to automatically check for a new version of firmware and alert you that the new firmware is available.
69 68 Setting Up your Computers 69 68 In order for your computer to properly communicate with your Router , you will need to change your computer’ s “TCP/IP / Ether net” settings to “Obtain an IP address automatically / Using DHCP”. This is normally the default setting in most home computers.
69 Setting Up your Computers 69 section 2 1 3 4 5 6 7 8 9 1 0 5. If “Use the following IP address” (2) is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below . Y ou will need to enter this information into the Router .
71 70 Setting Up your Computers 71 70 Manuall y Configuring Network Adapters in Windows 98SE or Me 1. Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu. 2 . Select “TCP/IP -> settings” for your installed network adapter .
71 Setting Up your Computers 71 section 2 1 3 4 5 6 7 8 9 1 0 4 . Write down the IP address and subnet mask from the “IP Address” tab (3). 5. Click the “Gateway” tab (2). Write down the gateway address in the chart. 6. Click the “DNS Configuration” tab (1).
73 72 Setting Up your Computers 73 72 Manuall y Configuring Network Adapters in Mac OS up to 9.x In order for your computer to properly communicate with your Router , you will need to change your Mac computer’ s TCP/IP settings to DHCP . 1. Pull down the Apple menu.
73 Setting Up your Computers 73 section 2 1 3 4 5 6 7 8 9 1 0 4 . If not already set, at “Configure:”, choose “Using DHCP Server”. This will tell the computer to obtain an IP address from the Router . 5. Close the window . If you made any changes, the following window will appear .
75 74 Setting Up your Computers 75 74 Manuall y Configuring Network Adapters in Mac OS X 1. Click on the “System Prefer ences” icon. 2 . Select “Network” (1) from the “System Preferences” menu. 3. Select “Built-in Ether net” (2) next to “Show” in the Network menu.
75 Setting Up your Computers 75 section 2 1 3 4 5 6 7 8 9 1 0 5. If “Manually” is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below . Y ou will need to enter this information into the Router .
77 76 Setting Up your Computers 77 76 Recommended W eb Bro wser Settings In most cases, you will not need to make any changes to your web browser’ s settings. If you are having trouble accessing the Inter net or the advanced web-based user interface, then change your browser’ s settings to the recommended settings in this section.
77 Setting Up your Computers 77 section 2 1 3 4 5 6 7 8 9 1 0 Netscape Navigator 4.0 or Higher 1. Start Netscape. Click on “Edit” then “Preferences”. 2 . In the “Preferences” window , click on “Advanced” then select “Proxies”. In the “Proxies” window , select “Direct connection to the Inter net”.
79 78 T r o ub l es ho ot in g 79 78 Pr obl em: The ADSL LED is not on. Sol uti on: 1. C h e c k t h e c o n n e c t i o n b e t w e e n t h e R o u t e r a n d A D S L l i n e . M a k e s u r e t h e c a b l e f r o m t h e A D S L l i n e i s c o n n e c t e d t o t h e p o r t o n t h e R o u t e r l a b e l e d “ D S L L i n e ”.
79 T r o ub l es ho ot in g 79 section 2 1 3 4 5 6 7 8 9 1 0 Pr obl em: My wireless PC cannot connect to the Router . Sol uti on: 1. M a k e s u r e t h e w i r e l e s s P C h a s t h e s a m e S S I.
81 80 T r o ub l es ho ot in g 81 80 3. T h e e x a c t w i n d o w t h a t o p e n s w i l l v a r y d e p e n d i n g o n t h e m o d e l o f w i r e l e s s c a r d y o u h a v e ; h o w e v e r, a.
81 T r o ub l es ho ot in g 81 section 2 1 3 4 5 6 7 8 9 1 0 Pr obl em: I can’t connect to the Inter net wirelessly , and my network name is not listed. Sol uti on: If the correct network name is not listed under “Available Networks” in the wireless utility , please attempt the following troubleshooting steps: 1.
83 82 T r o ub l es ho ot in g 83 82 In order to determine if wireless issues are related to range, we suggest temporarily moving the computer , if possible, five to 10 feet from the Router .
83 T r o ub l es ho ot in g 83 section 2 1 3 4 5 6 7 8 9 1 0 L o g i n t o y o u r R o u t e r b y c l i c k i n g o n t h e “ L o g i n ” b u t t o n i n t h e t o p r i g h t - h a n d c o r n e r o f t h e s c r e e n . Yo u w i l l b e a s k e d t o e n t e r y o u r p a s s w o r d .
85 84 T r o ub l es ho ot in g 85 84 Pr obl em: I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Wireless Card. Sol uti on: The Wireless Card must use the same key as the Wireless Router or Access Point.
85 T r o ub l es ho ot in g 85 section 2 1 3 4 5 6 7 8 9 1 0 Pr obl em: Do Belkin products support WP A? Sol uti on: Note: T o use WP A security , all your clients must be upgraded to drivers and software that support it. At the time of this F AQ publication, a security patch download is available, for free, from Microsoft.
87 86 T r o ub l es ho ot in g 87 86 4 . C l i c k “A p p l y C h a n g e s ” t o f i n i s h . Yo u m u s t n o w s e t a l l c l i e n t s t o m a t c h t h e s e s e t t i n g s . Pr obl em: I am having difficulty setting up Wi-Fi Protected Access (WP A) security on a Belkin Wireless Router or Belkin Access Point for a business.
87 T r o ub l es ho ot in g 87 section 2 1 3 4 5 6 7 8 9 1 0 3. O n c e t h e “A d v a n c e d ” b u t t o n i s c l i c k e d , t h e B e l k i n W i r e l e s s L A N U t i l i t y w i l l a p p e a r.
89 88 T r o ub l es ho ot in g 89 88 Pr obl em: I am having difficulty setting up Wi-Fi Protected Access (WP A) security and I am NOT using a Belkin Wireless Card for a home network.
89 T r o ub l es ho ot in g 89 section 2 1 3 4 5 6 7 8 9 1 0 Enabling WP A-PSK (no server) 1. U n d e r W i n d o w s X P , c l i c k “ S t a r t > C o n t r o l P a n e l > N e t w o r k C o n n e c t i o n s ”.
91 90 T r o ub l es ho ot in g 91 90 What’ s the differ ence between 802.11b, 802.11g, 802.11a, and Pre-N? Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation 802.
91 T r o ub l es ho ot in g 91 section 2 1 3 4 5 6 7 8 9 1 0 Wir eless Comparison Chart Wireless T echnology 802.11b 802.11g 802.11a Belkin Pre-N Speed 11Mbps 54Mbps 54Mbps 108Mbps Frequency Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.
93 92 T echnical Support Information 93 92 Belkin T echnical Support F o r l a t e s t s o f t w a r e u p d a t e s o r i f y o u h a v e a n y f u r t h e r q u e s t i o n s r e g a r d i n g i n s t a l l a t i o n o f t h i s p r o d u c t , p l e a s e v i s i t www .
93 Appendix es 93 section 2 1 3 4 5 6 7 8 9 1 0 Appendix A: Glossary IP Address The “IP address” is the inter nal IP address of the Router . T o access the advanced setup interface, type this IP address into the address bar of your browser . This address can be changed if needed.
95 94 Appendix es 95 94 2 . Y our ISP gave you software such as WinPoET or Enter net300 that you use to connect to the Internet. 3. Y ou have to double-click on a desktop icon other than your browser to get on the Inter net. T o set the Router to use PPPoE, type in your user name and password in the spaces provided.
95 Appendix es 95 section 2 1 3 4 5 6 7 8 9 1 0 ESSID Broadcas t Many wireless network adapters currently on the market possess a feature known as site survey . It scans the air for any available network and allows each computer to automatically select a network from the survey .
97 96 Appendix es 97 96 Client IP Filters The Router can be configured to restrict access to the Inter net, email, or other network services at specific days and times. Restriction can be set for a single computer , a range of computers, or multiple computers.
97 Appendix es 97 section 2 1 3 4 5 6 7 8 9 1 0 can leave the public IP to “0.0.0.0”. If you are using multiple public (WAN) IP addresses, it is possible to select which public (WAN) IP addr ess the DMZ host will be dir ected to.
99 98 Appendix es 99 98 UPnP UPnP (Universal Plug-and-Play) is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Router’ s firewall to be configured in a specific way to operate properly .
99 Appendix es 99 section 2 1 3 4 5 6 7 8 9 1 0 • In multistory homes, place the wireless router (or access point) on a floor that is as close to the center of the home as possible. This may mean placing the wireless router (or access point) on an upper floor .
101 100 Appendix es 101 100 4. Choose the “Quietest” Channel for your Wirel ess Network In locations where homes or offices are close together , such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with yours.
101 Appendix es 101 section 2 1 3 4 5 6 7 8 9 1 0 5. Secure Connections, VPNs, and AOL Secure connections typically requir e a user name and password, and are used where security is important.
103 102 Appendix es 103 102 Appendix C: Internet Connection Setting T abl e The following table provides references to select and configure Inter net connection in setting up your ADSL connection. Many ISPs use differ ent settings depending on the region and equipment they use.
103 Appendix es 103 section 2 1 3 4 5 6 7 8 9 1 0 Country Connection Protocol VPI/VCI Encapsulation ISPs Europe France PPPoE 8/35 LLC V arious Germany PPPoE 1/32 LLC T -Online, various Holland 1483 Br.
105 104 Information 105 104 FC C Statement DECL AR A TION OF CONFORMIT Y WIT H FCC RULES FOR ELEC TROM AGNETIC COMPA TIBILI T Y W e, Belkin Corporation, of 501 W est Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D7633-4 to which this declaration relates, complies with Part 15 of the FCC Rules.
105 Information 105 section 2 1 3 4 5 6 7 8 9 1 0 • Consult the dealer or an experienced radio/TV technician for help. Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’ s authority to operate the equipment.
107 106 Information 107 106 Belkin Corporation Limited Lifetime Product W arranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime.
107 107 2 1 3 4 5 6 7 8 9 1 0.
© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleT alk are trademarks of Apple Computer , Inc., registered in the U.S. and other countries.
デバイスBelkin F5D7632uk4v3000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Belkin F5D7632uk4v3000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBelkin F5D7632uk4v3000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Belkin F5D7632uk4v3000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Belkin F5D7632uk4v3000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Belkin F5D7632uk4v3000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBelkin F5D7632uk4v3000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Belkin F5D7632uk4v3000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBelkin F5D7632uk4v3000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。