XeroxメーカーPE120iの使用説明書/サービス説明書
ページ先へ移動 of 20
Quick Start Guide.
S ETTING U P Y OUR P RINT ER 1.2 CONTENTS Step 1: Unpa cking ......... ............ ............ ............ ... 1.3 Step 2: Installing the Toner Cartridge ....... ........... 1.5 Step 3: Loading Pa per ........... ........ ............ ........... 1.
S ETTING U P Y OUR P RINTER 1.3 English Step 1: Unpacking 1 Remo ve the machine and all accessories from the packing carton. Make sure that the machine has been packed with the foll owi ng it ems: N OTES : • Th e app earance o f the power cord an d the tel ephone line cord may d iffer d epen ding on your count ry’s specif icati ons.
S ETTING U P Y OUR P RINT ER 1.4 2 Remo ve the packing tape from the front, back, and sides of the machine. 3 Gently pull the scan lock label until it comes awa y from the machine. Thi s will pull the s canner locking switch into the FORWARD (Unlocked) position automatically .
S ETTING U P Y OUR P RINTER 1.5 English Step 2: Installing the Toner Cartridge 1 Open the front door . 2 Remo ve the sta rter toner cartridge from its bag. Gently shak e the cart ridge 5 or 6 ti mes to distr ibute the toner . Thoroughly shaking the ca rtridge will assure maximum copies per cartr idge.
S ETTING U P Y OUR P RINT ER 1.6 3 Hold the toner cartridge by the handle. Slowly insert the cartridge into th e opening in the mac hine. T abs on the sides of the cartridge and corr esponding grooves within the machine will guide the cartridge into the correct position until it locks into place completely .
S ETTING U P Y OUR P RINTER 1.7 English Step 3: Lo ading Paper The paper tray can hold a maxim um of 250 sheets of 20 lb (75 g/m 2 ) plain paper . T o l oad a stack of Letter-sized pa per: 1 Pull open the paper tray and remov e it from the machine. 2 F an the edges of the paper stack to separate the pages.
S ETTING U P Y OUR P RINT ER 1.8 4 Pa y attention to the pa p er limi t mark on both inside walls of the tray . P aper ov e rloading may cause pa per jams.
S ETTING U P Y OUR P RINTER 1.9 English Changing the Size of the Paper in the Paper Tray T o l oad longer sizes of paper , such as Legal-sized paper , you need to adjust the paper guides to extend the paper tray .
S ETTING U P Y OUR P RINT ER 1.10 F or paper smaller than Letter s ize, ad just the front paper length guide so that it light ly touches the paper stack . 3 Squeeze the width guide, as shown and slide it to the stack of paper until it lightly touches the side of the stack.
S ETTING U P Y OUR P RINTER 1.11 English Step 4: Connecting Telephone Line Plug one end of the supplied telephone line cord into the LINE jack on the machine and the othe r end into the wall jack.
S ETTING U P Y OUR P RINT ER 1.12 Step 5: Connecting a Pri n ter Cable For Local Printing T o p rint from y our compute r in a local en viron ment, you need to connect your machine to a computer with either a Universal Serial Bus (USB) cabl e or a para llel cable.
S ETTING U P Y OUR P RINTER 1.13 English Using a Parallel Cabl e N OTE : Conn ecting the machine to th e parallel port of the comput er requir es a certified parall el cable. Y ou need to buy an IEEE-1284 co mpliant parallel cable that is 3 m or less in length.
S ETTING U P Y OUR P RINT ER 1.14 For Network Printing (Wor kCentre PE120i only) Y ou can attach your machine to a network using an Ethernet cable (UTP cable with RJ.45 connector). The W orkCentre PE120i has a built-in network interface card. 1 Make sure that both the machi ne and the computer are turned off .
S ETTING U P Y OUR P RINTER 1.15 English Step 6: Turning the M a chine On 1 Plug one end of the supplied thr ee-pronged electrical cord into the AC socket on the machine a nd the other end into a properly grounded AC outlet. 2 Press the power switch to turn the machine on.
S ETTING U P Y OUR P RINT ER 1.16 Step 7: Changing the Di s play Language T o change the language that displays on the control panel, follow these steps: 1 Pres s Menu until “Machine Setup” appears on the top line of the display . 2 When “L anguage” a ppears o n th e bottom line of t he display , press Enter .
S ETTING U P Y OUR P RINTER 1.17 English Step 8: Install i ng Xerox Softwar e in Windows Sys tem Re quirem ents Before you begin, ensure that your system meets the minimum requirements. N OTE : For Windows NT 4.0/200 0/XP , the system administrator should install the software.
S ETTING U P Y OUR P RINT ER 1.18 Installing Xero x Driver CD For Windows 2000 or XP connecting via U SB port: 1 Mark sure that your machine is turned on and conne cted to your computer’s USB port before inserting Drivers CD . 2 The “New Hardware F ound” window will a ppear when your computer boots up.
S ETTING U P Y OUR P RINTER 1.19 English Step 9: Viewi ng the User’s Guide The User’s Guide, which is in Adob e Acrobat PDF forma t, comes with your machine i n the supplied EUG CD-ROM. The manual will provide you flexibil ity and convenience in accessing informat ion.
S ETTING U P Y OUR P RINT ER 1.20 M EMO.
デバイスXerox PE120iの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Xerox PE120iをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはXerox PE120iの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Xerox PE120iの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Xerox PE120iで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Xerox PE120iを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はXerox PE120iの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Xerox PE120iに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちXerox PE120iデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。