YamahaメーカーDSP-AX1の使用説明書/サービス説明書
ページ先へ移動 of 88
CINEMA DSP DOLBY DIGITAL DIGITAL SURROUND – + ON OFF 55 44 33 22 11 0 + – 55 44 33 22 11 0 + – 55 44 33 22 11 0 R L VCR 2 CD VCR 1 TUNER CBL/SAT TAPE D-TV MD LD DVD PHONO VCR 3 VIDEO AUX PHONES .
I CAUTION: READ THIS BEFORE OPERA TING YOUR UNIT . 1. T o assure the finest performance, please read this manual carefully . Keep it in a safe place for future reference. 2. Install this unit in a cool, dry , clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold.
1 English Contents Introduction 2 Features ............................................................................................................... 3 Getting Started ..............................................................................
2 Introduction Introduction Features 3 Introduction ......................................................................................................... 3 Dolby Digital and Dolby Digital Surround EX ...............................................
3 English Introduction Welcome to the exciting world of digital home entertainment. The DSP-AX1 is the most complete and advanced AV amplifier available. Though some of the more advanced features of this unit may not be familiar to you, they are easy to use.
4 Introduction Features Digital Sound Fields (DSP) Technological advances in sound reproduction over the last 30 years have enhanced the listening experience with improved clarity, precision, and power. However, something has been missing: the atmosphere and acoustic ambience of the public venue.
5 English Installing Batteries in the Remote Control Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity illustrations (+ and –) inside the battery compartment. Change the batteries periodically.
6 Introduction Controls and Functions Front Panel ~ ST ANDBY/ON Turns this unit on (On mode) and off (Standby mode). When you turn on this unit, you will hear a click and there will be a four to five to second delay before this unit can reproduce sound.
7 English ‡ BASS EXTENSION ON/OFF When pushed in (ON), this feature boosts the bass frequency of the left and right main channels by +6 dB (60 Hz) while maintaining overall tonal balance.
8 Introduction ON SCREEN LEVEL SLEEP TEST PARAMETER SET MENU % % TRANSMIT RE-NAME CLEAR MACRO MACRO LEARN OFF ON SYSTEM POWER STANDBY V-AUX TAPE PHONO D-TV CBL/SAT TUNER MD CD VCR 1 VCR 2 VCR 3 LD DVD.
9 English Controls and Functions ~ Infrared window Outputs infrared control signals. Aim this window at the component you want to operate. Ÿ CLEAR Used for clearing functions acquired using the Learn and Rename features, programmed macros, and preset manufacturer codes (see pages 61, 62).
10 Introduction ~ DTS indicator Lights up when the built-in DTS decoder is on. Ÿ VIRTUAL indicator Lights up when using Virtual Cinema DSP (see page 34). ! Multi-information display Shows the current DSP program and other information when adjusting or changing settings.
11 English Controls and Functions ~ RF (AC-3) input jack Connect to the RF output terminal of your LD player. Ÿ Audio equipment jacks Refer to page 16 for hookup information. ! Video equipment jac ks Refer to page 18 for hookup information. ⁄ Speaker terminals Refer to page 20 for hookup information.
12 Preparations Preparations Speaker System Configurations 13 Eight or Seven Speaker Configuration –Full Cinema DSP– ............................ 13 Six Speaker Configuration –Hi Fi DSP– ........................................................
13 English ( ) Speaker System Configurations The most complete speaker configuration consists of eight speakers: the left and right Main speakers, a Center speaker, the left and right Rear speakers, the left and right Front Effect speakers, and a Rear Center speaker.
14 Preparations FL L RL CR FR RR RC Speaker Placement Where you place your speakers has a tremendous effect on how well your system sounds. ■ Placing the Main Speakers Place the left and right Main speakers an equal distance from the main listening position.
15 English Connecting to Digital Jacks The DSP-AX1 has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables.
16 Preparations Hookups Connecting Audio Components Before you connect any components, disconnect the power supply to all the components you plan to connect including the DSP-AX1 and determine which jacks are for the left and right channels and for input and output.
17 English ■ Connecting a T ape Dec k 1 1 Connect the left and right signal output jacks on your tape deck to the TAPE 3 (PLAY) L and R jacks. 2 2 Connect the left and right signal input jacks on your tape deck to the TAPE 4 (REC) L and R jacks.
18 Preparations Connecting Video Components Before you connect any components, disconnect the power supply to all the components you plan to connect including the DSP-AX1 and determine which jacks are for the left and right channels and for input and output.
19 English Hookups ■ Connecting a VCR 1 1 Connect the left and right audio signal output jacks on your VCR to the VCR 1 IN L and R jacks. 2 2 Connect the left and right audio signal input jacks on your VCR to the VCR 1 OUT L and R jacks. 3 3 Connect the composite video signal output jack on your VCR to the VCR 1 VIDEO IN jack.
20 Preparations Connecting Speakers This section explains how to connect speakers to the DSP-AX1. After you finish connecting your speakers, use the SET MENU to change the signal output settings according to the number and size of the speakers in your configuration.
21 English IN IN PREOUT/MAIN IN FRONT REAR (SURROUND) SUB WOOFER SPLIT CENTER IN CENTER OUT MAIN IN MAIN OUT MONO REAR CTR RB- 2320 RS 232C OUT REMOTE 1 REMOTE 2 CTRL OUT +5V 20mA 100 Ω ■ Connecti.
22 Preparations Hookups ■ Connecting a Rear Subw oofer By using both Front and Rear Subwoofers, the CINEMA-DSP sound field programs can produce realistic movie effects with powerful, dynamic sound. To take advantage of this dynamic sound, be sure to set the 1C.
23 English Connecting External Amplifiers If you want to increase the power output to the speakers, or want to use another amplifier, connect an external amplifier to the PRE OUT/ MAIN IN terminals as follows. ~ MAIN jacks MAIN OUT jacks ..... Main channel line output jacks.
24 Preparations Connecting Power Supply Cords ■ Connecting the A C P ower Cor d After completing all connections, plug the AC power cord into a convenient AC outlet. ■ AC OUTLETS Use these to connect the power cords from your other components to this unit.
25 English On-Screen Displays (OSD) You can display the operation information for this unit on a video monitor. If you display the SET MENU and DSP sound field program parameter settings on a screen, it is much easier to see the available options and parameters than it is by reading this information on the front panel display.
26 Preparations Speaker Settings The DSP-AX1 has seven SPEAKER SET items in the SET MENU that you must set according to the number of speakers in your configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings.
27 English Before Y ou Begin 1 1 Set BASS , TREBLE and BALANCE on the front panel to “0” (the center position) and turn off BASS EXTENSION . 2 2 Sit in the main listening position and set PARAMETER/SET MENU on the remote control to PARAMETER . 3 3 Set 10KEY/DSP on the remote control to DSP and press / DTS SUR .
28 Preparations Speaker Output Levels Dolby Surround T est Use the Dolby Surround Test to balance the output levels of speakers required for surround sound systems. 1 1 Press TEST on the remote control so “TEST DOLBY SUR.” appears on the video monitor and front panel display.
29 English 1 1 2 2 3 3 4 4 Speaker Output Levels DSP T est Adjust the output level of the Front Effect speakers while this unit is reproducing a DSP sound field program.
30 Basic Operation Basic Operation Basic Playback 31 Power Control ................................................................................................... 31 Selecting a Source ..............................................................
31 English Power Control 1 1 Press STANDBY/ON (or SYSTEM POWER on the remote control) to turn on the power. • The front panel (and the monitor screen) shows the level of the volume for a few seconds and then switches to show the current sound field program.
32 Basic Operation Selecting a Source 1 1 Select the source using INPUT SELECTOR , or press one of the input buttons on the remote control. • The current source is indicated on the front panel display with an arrow. • The current source name and input mode appear on the front panel display and the video monitor for a few seconds.
33 English Basic Playback Input Modes and Indications AUTO Dolby Digital RF DTS DIGITAL ANALOG The DSP-AX1 comes with various input jacks. If your external component is connected to more than one type of input jack, you can set the priority of the input signal.
34 Basic Operation 10KEY DSP HALL 1 HALL 2 CHURCH JAZZ CLUB ROCK CONCERT ENTER- TAINMENT CONCERT VIDEO 2 CONCERT VIDEO 1 6.1/ES TV THEATER MOVIE THEATER 2 MOVIE THEATER 1 /DTS SUR. 0 +10 +100 12 3 4 56 7 8 91 0 1 1 1 2 CHP/INDEX Selecting a Sound Field Program You can enhance your listening experience by selecting a DSP sound field program.
35 English REC OUT/ZONE 2 allows you to record one source while viewing and/or listening to another source. Basic Recording Preparations 1 1 Turn on the power to the DSP-AX1 and all connected equipment. 2 2 Select the source equipment you want to record using REC OUT/ ZONE 2 .
36 Advanced Operation Advanced Operation SET MENU Items 3 7 Operating the SET MENU ................................................................................ 38 1. SPEAKER SET (1A. CENTER SP to 1G. MAIN LEVEL) ......................... 39 2. LOW FREQ.
37 English Items 1. SPEAKER SET 1A. CENTER SP 1B. MAIN SP 1C. REAR L/R SP 1D. REAR CT SP 1E. LFE/BASS OUT 1F. FRNT EFCT SP 1G. MAIN LEVEL 2. LOW FREQ. TEST 3. DOLBY D. SET 3A. LFE LEVEL 3B. D-RANGE 4. DTS SET 4A. LFE LEVEL 5. SP DELAY TIME 6. AUDIO DELAY 7.
38 Advanced Operation SET MENU Items ■ General pr ocedure for adjusting items Some items require extra steps to change to the desired setting. 1 1 Set PARAMETER/SET MENU to SET MENU . 2 2 Press % or % (or NEXT ) repeatedly to select an item, then press + or – (or SET MENU + or – ) to change the setting of that item.
39 English SET MENU Items Use this feature to select suitable output modes for your speaker configuration. You must set the output mode when you use a subwoofer.
40 Advanced Operation ■ 1D . REAR CT SP (Rear Center Speaker Mode) By adding a Rear Center speaker to your speaker configuration, the DSP-AX1 can provide more realistic front-to-back and back-to-front transitions. The initial setting is “LRG”. Select the “LRG” setting if you have a large Rear Center speaker.
41 English ■ 1F . FRNT EFCT SP (Front Eff ect Speaker Mode) The DSP-AX1 uses Front Effect speakers to localize the virtual sound sources of the sound field programs. If you do not use Front Effect speakers, you can direct the Front Effect signals to the Main speakers.
42 Advanced Operation SET MENU Items Use this feature to adjust the Subwoofer volume so it matches the volume of the other speakers in your configuration.
43 English SET MENU Items ■ 3A. LFE LEVEL Use this feature to adjust the output level of the LFE (low frequency effect) channel when playing back Dolby Digital encoded software. This setting is effective only when this unit decodes Dolby Digital signals.
44 Advanced Operation SET MENU Items ■ 4A. LFE LEVEL Use this feature to adjust the output level of the LFE (low frequency effect) channel when playing back DTS encoded software. This setting is effective only when this unit decodes DTS signals. The LFE signal carries the low frequency special effect sound which is only added to certain scenes.
45 English SET MENU Items 7. CENTER GEQ (Center Graphic Equalizer) Use this feature to adjust the built-in five band graphic equalizer so the Center speaker tone matches that of the left and right Main speakers. You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
46 Advanced Operation SET MENU Items 9. CINEMA EQ Use this feature to match the tonal quality of four groups of speakers: the Main and Center speaker group, the Front Effect speakers group, the Rear speakers group, and the Rear Center speaker group. CINEMA-EQ consists of a high-shelving equalizer (HIGH) and a parametric equalizer (PEQ).
47 English SET MENU Items 10. HP TONE CTRL (Headphone T one Control) Use this feature to adjust the level of bass and treble when you use your headphones. The initial Setting is 0 dB for both bass and treble. This does not effect to the 96 kHz sampling digital signal.
48 Advanced Operation SET MENU Items 13. MEMOR Y GUARD Use this feature to prevent accidental changes to DSP program parameter values and other settings on this unit.
49 English SET MENU Items 16. INPUT RENAME Use this feature to change the name of the input which appears on the OSD or the front panel display. 1 1 Select the input you want to change the name of by pressing an input button (or using INPUT SELECTOR ).
50 Advanced Operation Remote Control Features The remote control can operate the main unit as well as other Yamaha audio and video components. To control the components of other manufacturers (or some Yamaha), you must set up the remote control with the manufacturer’s codes.
51 English Remote Control Features ■ SOURCE SELECT You can control another component independently from the input you selected by pressing an input button.
52 Advanced Operation Remote Control Features Each Component Control Area The general operational buttons are shown for each area. Some of them may not function depending on the equipment you have.
53 English Remote Control Features ■ Operating a CD Play er (CD Area) ■ Operating an MD Recor der (MD Area) SYSTEM POWER STANDBY V-AUX TAPE PHONO D-TV CBL/SAT TUNER MD CD VCR 1 VCR 2 VCR 3 LD DVD .
54 Advanced Operation Remote Control Features ■ Operating an LD Pla yer (LD Area) ■ Operating a D VD Player (D VD Area) SYSTEM POWER STANDBY V-AUX TAPE PHONO D-TV CBL/SAT TUNER MD CD VCR 1 VCR 2 V.
55 English Remote Control Features ■ Operating a VCR (VCR 1 / VCR 2 / VCR 3 Area) ■ Operating a TV or Digital TV (D-TV Area) SYSTEM POWER STANDBY V-AUX TAPE PHONO D-TV CBL/SAT TUNER MD CD VCR 1 VC.
56 Advanced Operation Remote Control Features ■ Operating a Cable or Satellite TV T uner (CBSA T Area) ■ Free Area (OPTN and PHONO Areas) 6CH INPUT TITLE ENTER MENU SOUND DISPLAY SOURCE SELECT SEA.
57 English 1 1 Select the source component you want to preset by using the input buttons. 2 2 Press and hold LEARN for about three seconds using a ballpoint pen or similar object.
58 Advanced Operation Remote Control Features Programming a New Remote Control Function If you desire to program functions not included in the basic operations covered by the manufacturer code, or a manufacturer code is not available, the following procedure needs to be performed.
59 English Using the Macro Feature The Macro feature makes it possible to perform a series of operations by pressing just one button. For example, when you want to play a CD, normally you would turn on the components, select the CD input, and press the play button to start playback.
60 Advanced Operation 1 1 Press MACRO using a ball point pen or similar object. • If you do not initiate the procedure within 30 seconds, the macro programming process is canceled. 2 2 Press the macro button on which you want to program the Macro. • If you want to change the source component, use SOURCE SELECT % / % or the input buttons.
61 English Changing the Source Name in the Display Window Remote Control Features 1 1 Select the source component you want to rename by using the input buttons. 2 2 Press RE-NAME using a ballpoint pen or similar object. 3 3 Use the cursor buttons % / % to select a character.
62 Advanced Operation 1 1 Press CLEAR using a ballpoint pen or similar object. 2 2 Press % / % to select the clear mode. The mode is shown in the window in the following order: Clearing Learned Functi.
63 English Setting the Sleep T imer Use this feature to automatically turn off the main unit after the amount of time you set. The Sleep Timer is useful when you plan to fall asleep while the main unit is reproducing or recording a source. The Sleep Timer also automatically turns off external components connected to AC OUTLETS .
64 Advanced Operation ZONE 2 You can make up a multi-room audio-video system with this unit. With this feature, you can set this unit to reproduce separate input sources in the main room and second (Zone 2) room using the supplied remote control in the second room.
65 English Remote Control in ZONE 2 In the second (Zone 2) room, the supplied remote control can be used as the Zone 2 remote control. You can select the input source and control the component which is located in the main room directly from the second room regardless of the listening condition in the main room.
66 Additional Information Additional Information Digital Sound Field Processing (DSP) 6 7 Understanding Sound Fields ............................................................................. 67 Recreating a Sound Field ............................
67 English Digital Sound Field Processing (DSP) Understanding Sound Fields A sound field is defined as the “characteristic sound reflections of a particular space.” In concert halls and other music venues, we hear early reflections and reverberations as well as the direct sound produced by the artist(s).
68 Additional Information Hi-Fi DSP-Sound Field Program ■ Europe Hall A This is a large fan-shaped concert hall in Munich which has approximately 2500 seats. Almost the whole interior is made of wood. There is relatively little reflection from the walls, and sound spreads finely and beautifully.
69 English CINEMA-DSP The Sound Design of CINEMA-DSP Sound Field Programs Filmmakers intend the dialog to be located right on the screen, the effect sound a little farther back, the music spread even farther back, and the surround sound around the listener.
70 Additional Information CINEMA-DSP Movie Theater Programs Most movie software has four-channel (left, center, right and surround) sound information encoded using Dolby Surround matrix processing and stored on the left and right tracks. These signals are processed by the Dolby Pro Logic decoder.
71 English CINEMA-DSP Sound Field Program According to the input signal format, the DSP-AX1 automatically chooses the appropriate decoder and DSP sound field pattern.
72 Additional Information CINEMA-DSP Sound Field Program Program Group 9 : TV Theater ■ Mono Movie This program is provided for reproducing monaural video sources (such as old movies). The program produces the optimum reverberation to create sound depth using only the presence sound field.
73 English You can enjoy good quality sound with the preset parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room. Changing Parameter Settings 1 1 Set PARAMETER/SET MENU to PARAMETER on the remote control.
74 Additional Information Digital Sound Field Parameter Descriptions You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in every program.
75 English Digital Sound Field Parameter Descriptions S. DELAY S. INIT. DELAY SURROUND (LS/RS) S. DELAY Level Time S Sound Field Direct Sound Dolby Digital or DTS Input Level Time S Sound Field Direct Sound Others The surround sound field is not reproduced.
76 Additional Information Digital Sound Field Parameter Descriptions RC. ROOM SIZE (Rear Center Room Size) Function .................... This parameter adjusts the apparent size of the rear center sound field. Control Range ........... 0.1 - 2.0 Description .
77 English Digital Sound Field Parameter Descriptions REV . TIME (Reverberation T ime) Function .................... This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to decay by 60 dB (at 1 kHz). This changes the apparent size of the acoustic environment over an extremely wide range.
78 Appendix Appendix T roubleshooting 79 Reference Chart for the INPUT and OUTPUT Jacks 82 CINEMA - EQ Frequency Characteristics 82 Specifications 83.
79 English The unit fails to turn on when STANDBY/ON is pressed, or returns to standby mode suddenly soon after the power is turned on. Hum No Sound or no picture No picture No sound is coming from one side. The volume level cannot be increased very much when adjusting VOLUME .
80 Appendix T roubleshooting No sound is coming from the Effect speakers. No sound is coming from the Front Effect speakers. No sound is coming from the Center speaker. No sound is coming from the Rear Effect speakers. No sound is coming from the Subwoofer.
81 English A source cannot be recorded by a tape deck or VCR connected to this unit. “CHECK SP WIRES!" appears on the display. There is noise from a nearby TV or tuner. The sound is degraded when listening with the headphones connected to the CD player or cassette deck that are connected to this unit.
82 Appendix Reference Chart for the INPUT and OUTPUT Jacks CINEMA - EQ Frequency Characteristics Cinema EQ is a digital equalizer that lets you independently adjust the sound quality of each speaker.
83 English Specifications A udio Section Minimum RMS Output Power per Channel MAIN L/R, CENTER, REAR L/R/C (20 Hz to 20 kHz, 0.015% THD, 8 ohms) ------------ 110 W FRONT L/R (1 kHz, 0.
V482940-1 Printed in Japan Y AMAHA ELECTR ONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANAD A MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTR ONIK EUROP A G.m.b.H. SIEMENSSTR.
SYSTEM POWER STANDBY V-AUX TAPE PHONO D-TV CBL/SAT TUNER MD CD VCR 1 VCR 2 VCR 3 LD DVD 6CH INPUT TITLE ENTER MENU SOUND DISPLAY SOURCE SELECT SEARCH CHAPTER % ! ! $ *# $ % % % % % 10KEY DSP HALL 1 HALL 2 CHURCH JAZZ CLUB ROCK CONCERT ENTER- TAINMENT CONCERT VIDEO 2 CONCERT VIDEO 1 POWER REC STOP PAUSE PLAY 6.
Quick Reference Card SYSTEM POWER STANDBY V-AUX TAPE PHONO D-TV CBL/SAT TUNER MD CD VCR 1 VCR 2 VCR 3 LD DVD 6CH INPUT TITLE ENTER MENU SOUND DISPLAY SOURCE SELECT SEARCH CHAPTER % ! ! $ *# $ % % % % % 10KEY DSP HALL 1 HALL 2 CHURCH JAZZ CLUB ROCK CONCERT ENTER- TAINMENT CONCERT VIDEO 2 CONCERT VIDEO 1 POWER REC STOP PAUSE PLAY 6.
デバイスYamaha DSP-AX1の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Yamaha DSP-AX1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha DSP-AX1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha DSP-AX1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha DSP-AX1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha DSP-AX1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha DSP-AX1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha DSP-AX1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha DSP-AX1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。