ZenithメーカーP60W26の使用説明書/サービス説明書
ページ先へ移動 of 59
PLASMA DISPLA Y P ANEL ON/OFF INPUT SELECT VOLUME P/NO : 3828V A0277V (NP00KB) PLASMA DISPLA Y P ANEL Please read this operating guide carefully before using the Monitor . Keep the operating guide with the Monitor . For future reference, write down the serial number on the back of the Monitor in the space provided below .
ON/OFF INPUT SELECT VOLUME W ARNING T O REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PROD- UCT T O RAIN OR MOISTURE. The explanation about colored dots may be present on PDP screen The PDP which is the display device of this product is composed of 0.
Keep this manual with Monitor for future easy refer- ence) T able of Contents First step W ARNINGS ..............................................................4 SAFETY INSTRUCTIONS ........................................5 Monitor Overview Front Panel Controls .
4 W ARNINGS W ARNING : T O REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P AR TS INSIDE. REFER T O QUALIFIED SERVICE PERSONNEL.
5 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others Important safeguards for you and your new product Y our product has been manufactured and tested with your safety in mind. However , improper use can result in potential electrical shock or fire hazards.
6 SAFETY INSTRUCTIONS The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventila- tion is provided or the manufacturer ’s instructions have been adhered to.
7 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
8 Front Panel Controls ON/OFF ON/OFF INPUT SELECT VOLUME INPUT SELECT VOLUME <Front Panel Controls> Main power button INPUT SELECT button Power standby indicator Illuminates red in standby mode,.
9 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others (+) ( ) (+) ( ) (+) ( ) (+) ( ) AUDIO (MONO) R L VIDEO Y P B R P AV INPUT AUD.
Remote Control Key Functions/Accessories - When using the remote control aim it at the remote control sensor on the Monitor . 10 power on mute 13 2 46 5 79 8 video/pc menu up down vol vol enter 0 sleep system off pip input select ratio twin picture freeze easy sound position apc power on button sleep button (Refer to p.
11 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others video/pc button on the remote control Each press of this button changes the mode as shown below . S-VIDEO COMPONENT VIDEO RGB AS mark Monitor 1.
12 Monitor Installation - It is recommended that this product only be used at an altitude of less than 6562 feet (2000m) to get the best quality picture and sound.
13 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others Desktop Pedestal Installation ON/OFF INPUT SELECT VOLUME • The Monitor can be installed on a desk as shown above. (For further information, refer to the optional ‘Desktop Stand Installation and Setup Guide’.
14 VCR Setup Tips • T o avoid picture noise (interference), leave an adequate distance (20 inches or more) between the VCR and monitor . S-VIDEO OUT IN (R) AUDIO (L) VIDEO Back panel of VCR - As sho.
15 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others (+) ( ) (+) ( ) AUDIO (MONO) R L VIDEO Y P B R P AV INPUT AUDIO R L R L EXTE.
16 Cable TV Setup - After subscribing to a cable TV service from a local provider and installing a converter , you can watch cable TV programming. This monitor cannot display TV programming without a TV tuner or cable TV converter box.
17 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others R L AUDIO VIDEO (+) ( ) (+) ( ) AUDIO (MONO) R L VIDEO Y P B R P AV INPUT AU.
18 DVD Setup • Connect DVD video inputs to Y , P B , P R of COMPONENT (480i/480p/720p/1080i) (DVD/DTV INPUT) and audio inputs to Audio jacks of A V INPUT . How to connect a DVD (digital video disk player) How to use • T urn on the DVD player , and insert a DVD.
19 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others DTV Setup - T o watch digitally broadcast programs, purchase/connect a digital SET -TOP BOX. - Y ou can select only the 16:9 picture format in DTV 720p/1080i mode.
20 PC Setup - Y ou can easily connect the Plasma Display to your PC for outstanding image and sound. - Use the Monitor to display images and sound from a PC Computer source.
21 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others Monitor Image Display Specifications 640x350 720x400 31.468 70.09 37.861 85.08 31.469 70.08 37.927 85.03 31.469 59.94 35.000 66.
22 3 2 PC Mode Feature Check (Overview) - Select RGB first, see page 1 1. - Make sure the PC and monitor are both turned on. - Use the monitor’s remote control to make adjustments. 1 Press the menu button to show menus on screen. Press the vol ( G ) button and then press the up/down or vol button to select a feature you want to use.
23 Safety instructions Monitor Overview Basic operation Sleep timer Picture & Sound Special features Others Connections 1 3 PC Mode Adjustments Press the up/down button to select SCREEN and then press the vol ( G ) button. If picture needs to be adjusted more after Auto adjustment, you can manually adjust the image position and PHASE .
24 3 2 1 Press the up/down button to select SCREEN and then press the vol ( G ) button. Adjusting horizontal / vertical position manually READY Press the up/down button to select V -POSI- TION or H-POSITION and then press the vol ( G ) button. • The adjustment range of V -POSITION is -50 ~ +50.
25 Safety instructions Monitor Overview Basic operation Sleep timer Picture & Sound Special features Others Connections 3 2 1 Use the up/down button to select SCREEN and then press the vol ( G ) button.
26 Picture In Picture (PIP) function - PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source will show a smaller inset image. - Select RGB input source before pressing PIP .
27 Safety instructions Monitor Overview Basic operation Sleep timer Picture & Sound Special features Others Connections Selecting the source input signal Press the input select button in PIP mode. • Each time you press input select button, you toggle VIDEO , S-VIDEO and COMPONENT .
28 3 2 1 Use the up/down button to select PIP / DW and then press the vol ( G ) button. READY Use the up/down button to select SOUND SELECT and then press the vol ( G ) button. • Each time you press up/down button, you toggle between SOUND [ M ] or SOUND [ S ].
29 Safety instructions Monitor Overview Basic operation Sleep timer Picture & Sound Special features Others Connections T win picture mode - As the name suggests, this mode splits the screen into 2, allowing 2 sources to be shown on the monitor screen at the same time.
30 T win picture mode Selecting a source for the T win picture Press the input select button in TWIN PICTURE mode. • Each time you press input select button, you toggle VIDEO , S-VIDEO and COMPONENT . COMPONENT source only works in 480i input signal.
31 Safety instructions Monitor Overview Basic operation Sleep timer Picture & Sound Special features Others Connections Using the remote control Installing batteries • Open the battery compartme.
32 T urning on the Monitor 3 2 1 2 1 - When using the remote control, aim it at its sensor on the Monitor . T urning on the Monitor just after installation T urning on the Monitor (power cord is still connected) Connect power cord correctly . Press the main ON/OFF button on the Monitor .
33 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others Selecting language for the menus 3 2 1 READY Press the up/down button to select LANGUAGE and then press the vol ( G ) button. Press the up/down button to select the desired language.
34 1 3 2 Press the menu button. Press the up/down button. • Each press will cycle through the menus shown below . Checking features Press the vol ( G ) button to select a feature to adjust, and then press the up/down or vol buttons to adjust the selected item.
35 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others Setting Sleep T imer Sleep T imer turns the Monitor off after a preset time Press the sleep button to set sleep time.
36 2 1 APC (Auto Picture Control) Press the apc button. Press the apc or vol buttons to select your desired picture condition. • Each press of vol buttons changes the screen display as shown below . • Y ou can also select CLEAR , SOFT or USER in the PIC- TURE menu.
37 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others 2 1 READY Example : Changing the contrast. Press the up/down button to select CONTRAST and then press the vol ( G ) button. • Adjust BRIGHTNESS , COLOR , TINT and SHARPNESS in the same way .
38 DRP (Digital Reality Picture) DRP improves image outlines in dark screens. 3 1 READY Press the up/down button to select DRP and then press the vol ( G ) but ton. Press the enter button. APC G DRP G CONTRAST 100 G BRIGHTNESS 50 G COLOR 50 G TINT 0 G SHARPNESS 50 G CLEAR SOFT PICTURE DRP 2 Press the up/down button to select CLEAR or SOFT .
39 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others Adjusting sound Manual setting 2 1 READY Example : Adjustment treble Use the up/down button to select TREBLE and then press the vol ( G ) button.
40 Auto Sound Control DASP (Digital Auto Sound Processing) • This function lets you enjoy the best sound without any manual adjustment because the Monitor automatically selects the appropriate audio tone levels based on the program content. 1 Press the easy sound button.
41 Safety instructions Monitor Overview Connections Basic operation Sleep timer Special features Others Picture & Sound A VL (Auto V olume Leveler) This feature maintains an equal volume level; even if you change channels. 3 1 READY Press the up/down button to select A VL and then press the vol ( G ) button.
42 Using Still function 1 2 Press the freeze button. • The image displayed is frozen(still). • The sub picture is stilled in PIP or T win picture mode. • In PIP or TWIN PICTURE modes, the sub (inset) picture is frozen. <Moving image> <Still image> T o return to normal viewing, press the freeze button again.
43 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others 3 2 1 READY Use the up/down button to select SCREEN and then press the vol ( G ) button. Use the up/down buttons to select TV or V CR .
44 Adjusting OSD T ransparency T o make the menus clear or opaque 3 2 1 READY Press the up/down button to select TRANSP ARENCY and then press the vol ( G ) button. Press the vol buttons to adjust OSD transparency . • The adjustment range of TRANSP ARENCY is 0 ~ 5.
45 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others READY Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. Adjusting color temperature 3 2 1 Press the up/down button to select COLOR TEMP .
46 Setting picture format Press the ratio button to select a desired picture format. • Y ou can also select 16:9 , 4:3 or ZOOM in the SPECIAL menu. • Each time you press ratio or vol buttons, you can select 16:9 , 4:3 or ZOOM alternatively .
47 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others - Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor ’ s functions externally .
48 External Control Device Setup T ype of connector : D-Sub 9-pin male * Use a null modem cable. Wire the 7-Wire cable so that each pair of data lines cross between the two devices. These data line pairs are RXD (Receive data) and TXD (T ransmit data), DTR (DTE side ready) and DSR (DCE side ready), and RTS (Ready to send) and CTS (Clear to send).
49 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others RS-232C configurations 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS TXD RXD GND.
50 1 Use the up/down buttons to select SET ID and then press the vol ( G ) button. • Use this function to specify a monitor ID number . SET ID READY Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button.
51 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Others Special features Communication Parameters Command Reference List - The RS-232C input jack is used to control the Monitor’s functions using an external control device.
52 External Control Device Setup 01. Power (Command:p) G T o control Power On/Off of the Monitor . T ransmission Data 0 : Power Off 1 : Power On * Example : Power on for set ID No.3. T ype : P 3 1 ‘0x0D’ [p][ ][Set ID][ ][Data][Cr] Acknowledgement Data 0 : Power Off 1 : Power On * In example : Monitor Acknowledges power on for set ID No.
53 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Others Special features * Real data mapping 0 : Step 0 A : Step 10 F : Step 15 10 : Step 16 64 : Step 100 06. V olume control (Command:v) G T o adjust volume.
54 External Control Device Setup 12. OSD select (Command:d) G T o select OSD (On Screen Display) on/off. T ransmission * The remote control and Monitor front panel controls (except main power) are not operable when the Monitor is set up to be controlled by the PC computer .
55 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others * COMPONENT source only works in 480i input signal. 16. PIP sound select (Command:u) G T o select main or sub (inset) sound for PIP/T win picture.
56 Note.
57 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others Others Maintenance Cleaning the screen 1. Here’s a great way to keep the dust of f your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
58 No output from one of the speakers • Adjust BALANCE in the SOUND menu. (Refer to p.39) T roubleshooting check list No picture & No sound • Check whether the Monitor is turned on. • Power cord inserted into wall outlet? • Plug another product’s power cord into the wall outlet where the Monitor ’s power cord was plugged in.
59 Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others Product specifications MODEL W idth (inches / mm) Height (inches / mm) Depth (inches / mm) Weight (pounds / kg) Power requirement Resolution Color T emperature (In opera tion) Humidity (In operation) P60W26 57.
デバイスZenith P60W26の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Zenith P60W26をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはZenith P60W26の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Zenith P60W26の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Zenith P60W26で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Zenith P60W26を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はZenith P60W26の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Zenith P60W26に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちZenith P60W26デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。