Zoomメーカー1120の使用説明書/サービス説明書
ページ先へ移動 of 32
QUICK ST ART and REFERENCE GUIDE.
Contents INTRODUCTION ................................................................................ 3 W HAT Y OU N EED TO U SE Y OUR F AXMODEM ..................................... 3 CHAPTER 1 INSTALLING YOUR FAXMODEM ........................ 4 E ASIER I NSTALLATION .
Introduction 3 Introduction Congratulations! Your new faxmodem is a powerful, flex i - ble tool that provides fast connections to the Internet and will help you manage your communications, work more effectively, and present a polished and professional image at home or at the office.
4 Quick Start and Reference Guide Chapter 1 Installing Your Faxmodem Easier Installation We have enhanced the plug-and-play capability by pr o - viding a software program that you must run before you install your faxmodem. This program installs “driver” files and sets up your computer to recognize the new faxm o - dem.
Chapter 1 Installing Your Faxmodem 5 must detect your modem settings in order to co m - plete their setup routines. When the PCI modem installation program has fi n - ished, remove the CD from its drive and shut down your co m puter. Installing the Faxmodem Card CAUTION Do not handle any internal modem card when the phone line is plugged into it.
6 Quick Start and Reference Guide you have two telephone lines and want to keep your fax program running on one line while you access the Internet on the other line.
Chapter 1 Installing Your Faxmodem 7 to remove the old modem. Continue with step 3 b e - low. 3 Before you start the hardware installation, close all running programs and shut down Windows if you have not already done so. Then turn your computer off and unplug it.
8 Quick Start and Reference Guide Now insert your new faxmodem firmly into an avai l - able PCI slot. See the following illustration. PCI slo t 16-bit ISA slot s Typical cove r plate The PCI slot is designed to easily mate with your new PCI modem.
Chapter 1 Installing Your Faxmodem 9 9 Plug in your computer and turn it on. 10 As the Windows operating system starts up, it will detect your new faxmodem. Because the installation program has already provided your computer with the required files, you will see Windows report on its progress, but it will not require any action on your part.
10 Quick Start and Reference Guide 12 If you have not encountered any problems, your modem is installed and you can move on to Testing Your Faxmodem , below. If you are having install a - tion problems, see Chapter 4. Testing Your Faxmodem Before you set up your software, start with a quick test to check that your modem is working.
Chapter 2 Installing and Using COMMUNICATE! LITE Software 11 Chapter 2 Installing and Using COMMUNICATE! LITE Software The Zoom Link CD-ROM disc that was provided with your faxmodem includes COMMUNICATE! LITE , by 01 Comm u - nique Laboratory, Inc. This is an integrated communic a - tions software package.
12 Quick Start and Reference Guide Click on the COMMUNICATE! button to begin the i n - stallation. On the COMMUNICATE! LITE Main Menu you will be offered a choice of languages. Choose the language you want to install. After a few seconds the COMMUNICATE! Installation screen will a p pear.
Chapter 2 Installing and Using COMMUNICATE! LITE Software 13 COMMUNICATE! LITE is now installed and ready to send and receive faxes or voice me s sages. Running COMMUNICATE! LITE COMMUNICATE! LITE comes with extensive on-line help to guide you through faxing, data calling, and many other features.
14 Quick Start and Reference Guide mouse pointer. The illustration above was created with the mouse pointer (not shown here) paused over the View File button. Notice that “Use graphic editor” appears in the panel at the top middle, and that “Graphic editor” appears in a light rectangle just below the View File bu t ton.
Chapter 2 Installing and Using COMMUNICATE! LITE Software 15 Getting Help for COMMUNICATE! LITE For help with COMMUNICATE! LITE , consult the extensive help file included with the program.
16 Quick Start and Reference Guide Chapter 3 Using the Faxmodem with Other Software This chapter provides tips for setting up communica tions software, sending initialization strings containing AT commands to the faxmodem, using audio features, using a video camera, and accessing the Inte r net.
Chapter 3 Using the Faxmodem with Other Software 17 computer and the modem take place at this higher speed, independent of the modem-to-modem speed. The modem auto-negotiates the highest speed con - nection between i t self and the other modem.
18 Quick Start and Reference Guide • • If your telephone service includes Call Waiting that you can temporarily suspend by pressing *70 , include ATDT*70, (including the comma) in the dial string. Using AT Commands If your software does not handle AT commands automat i - cally, it should provide a place to enter AT commands in its setup menus.
Chapter 3 Using the Faxmodem with Other Software 19 software that supports these features must be TAPI co m - patible (TAPI stands for Telephony Application Progra m - ming Interface) or support IS-101 commands. An example of a TAPI-compatible software that supports voice mail is Microsoft Phone™.
20 Quick Start and Reference Guide Chapter 4 Problems and Solutions Note: If your modem is not working, please read this chapter and the communications software doc u - mentation in Chapter 3 care fully. Also, the modem drivers for your faxmodem are updated periodically to enhance performance or features.
Chapter 4 Problems and Solutions 21 The modem works well when you are not using data compression, but the compression features are inoperative. 28 General Troubleshooting Problem : Your modem seems to install under Windows 95 or 98, but Windows cannot find it later.
22 Quick Start and Reference Guide second, type +++ , and wait another second or more.) If you typed a command but did not receive an OK response from your modem: The E0 and Q1 commands may be in effect, dis abling echo and responses. Verify this with the &V command.
Chapter 4 Problems and Solutions 23 If the software does not have speaker settings, add one of the AT commands listed below to the initial i zation string: L1 for low volume L2 for medium volume L3 for highest volume For example, if you want the volume low and the software uses the initialization string AT &F , change it to AT &F L1 .
24 Quick Start and Reference Guide commands (IS-101 commands are sometimes called +V commands). Consult your voice sof t - ware’s documentation to determine whether it supports TAPI and/or IS-101. Also, be sure you are using the latest 32-bit version of the sof t - ware.
Chapter 4 Problems and Solutions 25 In the following table, “protocol” means error correction and data compression. Note that the first two lines in the table are likely to be the most val u able. Note 1: In the command strings shown in the table that follows, the character 0 is zero, not the letter “O.
26 Quick Start and Reference Guide &D2 parameter settings are stored. Refer to the Web page at www.modems.com for the complete set of AT co m - mands.
Chapter 4 Problems and Solutions 27 Problem: Your modem disconnects while communica t - ing with a remote system. Solution: The remote system has hung up, and you need to reconnect. The other most common sources of interruptions are Call Waiting or someone picking up an extension phone.
28 Quick Start and Reference Guide If both modems are using the MNP or V.42 protocol, the only way this can occur is if your modem and communications software are not using the appropriate flow control . Configure your communications software for RTS/CTS (hardware) flow control.
Appendix: Regulatory Information 29 Appendix: Regulatory Information FCC Part 68 Telecommunications Statement The Federal Communications Commission (FCC) has established rules which permit this device to be directly connected to the telephone ne t - work.
30 Quick Start and Reference Guide FCC Part 15 Emissions Statement All modems generate radio frequency energy and if not installed and used properly, i.e., in strict accordance with these instructions, may cause inte r - ference to radio and television reception.
Appendix: Regulatory Information 31 repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to r e - quest the user to disconnect the equipment.
2058-B 27555 ©1998 Important Information In the event you need to call for technical support or customer service, you will need the information below. We recommend that you take a few moments to fill in the following information for your future reference.
デバイスZoom 1120の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Zoom 1120をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはZoom 1120の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Zoom 1120の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Zoom 1120で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Zoom 1120を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はZoom 1120の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Zoom 1120に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちZoom 1120デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
