ZyXEL CommunicationsメーカーIDP 10の使用説明書/サービス説明書
ページ先へ移動 of 42
ZyW ALL IDP 10 Intrusion Detection Prevention Appliance Support Notes V ersion 1.0 Aug 2004.
IDP Support Notes 2 INDEX Application Notes ............................................................................................................................ 4 Deploy IDP .....................................................................
IDP Support Notes 3 Why can’ t I input mail server address by domain nam e? ........................................................32 What’ s “Drop” and “Block Connection” for Action of User Defined Policy? ........................33 How to use URL String in Content setup of User-defined policy?.
IDP Support Notes 4 Application Notes Deploy IDP IDP functions as a plug and play bridge device filtering malicious traf fic from attacking your networks. W ith continuous signa tures update, users can get free fr om network-based intrusions. In this example, we describe how to deploy and configure ZyW ALL IDP10 in a network.
IDP Support Notes 5 Servers/PC 192.168.2.5-10 LAN1: 192.168.1.5-50 LAN2: 192.168.1.51-100 WLAN: 192.168.1.101-130 Data Center: 192.168.1.131-140 Device IDP (A) IDP (B) IDP (C) IP Address 192.168.1.141 192.168.1.142 192.168.1.143 Device IDP (D) IDP (E) IDP (F) IP Address 192.
IDP Support Notes 6 Setup IP address of IDP (A, B, C, D, E, F) 1. Configure each IDP device’ s IP address. Since IDP is a bridge device, it only has one IP address for management purpose, IDP also uses this IP address to update signatures and the send system logs through syslog/E-mail/FTP .
IDP Support Notes 7 1. Connect one PC to IDP’ s management port by cr ossed Ethernet cable. Make sure MGMT port light is on. 2. Go to S tart->Settings->Network and Dial-up C onnections, and select the Ethernet connection you are connecting to IDP device.
IDP Support Notes 8 5. Go to SYSTEM->General->Device, input IDP (A,)’ s IP address, subnet mask, default gateway , DNS server ’ s IP address. 6. Repeat step 1-5 to configure IDP (B, C, D, E, F) according to IP address assignment table. All contents c opyright (c ) 2004 Zy XEL Comm unications Cor poration.
IDP Support Notes 9 Connect the MGMT/LAN/W AN ports of all IDP devices to the network according to the deployment topology (192.168.1.0/24). Login IDP (A, E)’ s WEB GUI; go to SYSTEM->INTERF ACE->Policy Check. Then enable policy checking on W AN port of IDP (A, E).
IDP Support Notes 10 Register ZyW ALL IDP ZyW ALL IDP comes with a “pre-defined” polic y set which requires subscription and can be update at regular bases. Having an up-to-date policy set is essentia l as new attack types evolve. 1. A “Device License Key” card is included in ZyW ALL IDP package for one year fre e subscription.
IDP Support Notes 11 2. Go to ZyXEL Communications online services center . http://www .myZyXEL.com . 3. In case you haven't got an account on m yZyXE L.com, you need to get a new account. Please follow the instruction on myZyXEL.com ; we skip the description of detailed procedure in this article.
IDP Support Notes 12 5. Press add button to add the Zy W A LL IDP you have. 6. In this step you need to enter Serial Number , Authentication Code (MAC address), and a Friendly Name for your product. Y ou can find serial number and MAC address at the bottom of your device.
IDP Support Notes 13 7. Input the date you purchase the pr oduct, and the purpose of the buying. 8. Y ou would get a successful message. Then press Continue button.
IDP Support Notes 14 9. From ZyW ALL IDP’ s Applicable Se rvice List, you will have a service " IDP Signature Update " available. Click Activate. 10. Enter the license key you get from “ Device License Key ” card. Then press Submit button.
IDP Support Notes 15 1 1. After clicking Submit button, you will get an “ Activation Key ” and “ Service Set Key ”. An email with these keys will be sen d to your email address as well. 12. Y ou can copy & paste “ Activation Key ” to ZyW ALL IDP’ s Registration page.
IDP Support Notes 16 Firmware Upgrade 1. Under Maintenance you can find F/W Upload tab. Click browse to select firmware file (.bin) and click Upload button to start firmware upload. 2. It may take few minutes for firmware upload process to finish. ZyW ALL IDP will reboot when firmware upload completed.
IDP Support Notes 17 Signature Update *Make sure you have registered your ZyW ALL IDP before you do the signature update. T o update pre-defined policy for your ZyW ALL ID P , login into ZyW ALL IDP via HTTP , go to IDP > Update and enter U pdate Server ’ s domain name (updateidp.
IDP Support Notes 18 Configure User Defined Policy In this example, we describe the procedure of using user defined policy . W e take eMule application as an example.
IDP Support Notes 19 4. S tart ethereal packet capturing. 5. Initiate eMule connection from the internal PC, be sure to reduce unnecessary traf fic if possible. 6. S top packet capturing. 7. Analyze the packet. In ethereal, you will ge t 3 sub-windows.
IDP Support Notes 20 8. Count the TCP offset and the leng th of “http://emu le-prjoect.net” 9. Create User-defined policy in IDP . Login to IDP’ s WEB GUI; go to IDP->User -defined. W e’ll create a user -defined policy for TCP protocol, with offset=38 bytes, matching depth=24 bytes.
IDP Support Notes 21 After click Apply button, we get the summary of the user defined policy . All contents c opyright (c ) 2004 Zy XEL Comm unications Cor poration.
IDP Support Notes 22 All contents c opyright (c ) 2004 Zy XEL Comm unications Cor poration..
IDP Support Notes 23 IDP F AQ What is HIDS? Host intrusion detection system s are intrusion detection system s that are installed locally on host machines. This makes HIDS a very versatile system compared to NIDS. HIDS can be installed on many dif fer ent types (roles) of machines nam ely servers, workstations and notebook co mputers.
IDP Support Notes 24 Is IDP able to investigate VPN traf fic? No, VPN traf fics are encrypted, IDP is not able to decrypted VPN traffics, and thus it could not investigate VPN packets. Product F AQ What is ZyW ALL IDP10? ZyW ALL IDP10 f unctions as a plug and play bridge device f iltering malicious traf fic from attacking your networks.
IDP Support Notes 25 crash? ZyW all IDP 10 does not support hardware bypa ss, so if your ZyW ALL IDP 10 lost power or crashed, you will need to either replace it or take it of f the network immediately . If I forget IDP’s p a ssword, how to reset the password to default? The default IDP user name/password is “admin/1234”.
IDP Support Notes 26 9600bps baud rate N81 data format (No Parity , 8 data bits, 1 stop bit) The baud rate of IDP10 is unchangeable. How to trouble shoot the false positive and false negative cases? Please capture the problematic packets through the following steps and send the packet trace back to ZyXEL support.
IDP Support Notes 27 When should I use VLAN T ag function? V irtual LAN, a groups of network devices (PC, router , etc…) that behave as if they are connected to the same wire even t hough they may actually be physically located on dif ferent segments of a LAN.
IDP Support Notes 28 Select Maintenance from the menu, and click Restart T ab Click Restart button to restart your ZyW ALL IDP . It may take few minutes before you can access the device again. Console Login using admin/1234, and type the comm and “reboot” to restart your device.
IDP Support Notes 29 What does "S tealth" mean, why should I need it? When you enable St e a l t h mode on an interface (W AN/LAN/MGMT), it will not respond to any type of traf fic intended for it; it will not respond to traf fic like ICMP echo request.
IDP Support Notes 30 What's Pre-defined signature? Pre-defined signatures ar e signatures created by ZyXEL Security Response T eam (ZSR T) . These signatures are attack patterns or m isuse network behavior researched and studied by ZSRT , then compiled into a “p re-defined” policy set available for update.
IDP Support Notes 31 And you should make sure your ZyW ALL IDP 10 has updated policy to the latest version. Go to W E B Interface Æ Home. I can’t download the latest policy from update server . How can I fix the problem? W e recommend users to update policy , send E-mail reports or syslogs through ZyW ALL I DP10’ s MGMT port (management port).
IDP Support Notes 32 stealth mode on W A N (or LAN ) interface. Additionally , since ZyW ALL IDP10 downloads the latest policies periodically from the update server (updateidp.z yxel.com). DNS server should be configured correctly on ZyW ALL IDP10 ( SYSTEM/GENEARL/Device/DNS Server ).
IDP Support Notes 33 What’s “Drop” and “Block Connecti on” for Action of User Defined Policy? Action of “Drop”, will drop the traf fic that matches the def ined policy silently . So the sender would not get any response or e rror/warning message about the action.
IDP Support Notes 34 created to check Outgoing direction, it is applied on LAN interface. While a policy is set Bi-dir ectiona l, it is applied on both WA N and LAN interfaces. How to decide which Interface sh ould be applied for policy check? Users can setup policy check from WEB GUI/SYSTEM/INTERF ACE/Policy Check .
IDP Support Notes 35 If the IDP is placed on the entry point of a W ireless LAN network, we recommend you to apply policy check on the W AN interface, due to the lack of security protection of W ireless LAN. In User-defined policy , what’ s the meaning of Matching Offset, Matching Depth? Matching Offset defines the payload start point.
IDP Support Notes 36 What’s the priority among Pre-def i ned policy and User-defined policy? The User-defined policies are always checked before the Pre-defined policy . T r ouble Shooting In this part we’ll introduce the steps to trouble shoot when problems occur at customer side.
IDP Support Notes 37 Step4. Search this policy by the Policy ID in IDP >> Pr e-defined>>Policy Sear ch . Step5. Under the search result, please change the Action taken to Log ONL Y and click Apply . All contents c opyright (c ) 2004 Zy XEL Comm unications Cor poration.
IDP Support Notes 38 Step6. Switch your IDP back to Inline state and activate them by clicking Apply . Then try to run the application again. S tep7. Finally , it should be able to r un now .
IDP Support Notes 39 S tep8. If it was still unable to run then please repeat step 3, 4, 5 until identify and correct this False Positives policy . CLI Command List System related Command Command Desc.
IDP Support Notes 40 stateful <ON/OFF> Enable/disable TCP state check integrity <ON/OFF> Setup TCP idle timeout tcptimeout <value> Setup maximum ping lengt h pinglen <value > S.
IDP Support Notes 41 off Disable remote SSH access acl <ip address> Setup access control list ip address web on <CAN+MGMT/W AN+MGMT/MGM T/ALL> Enable remote web access from LAN+MGMT/W AN+M.
IDP Support Notes 42 Debug mode CLI Command Command Description set system ip <ip> Setup device temporar y ip address in the debug mode mask <mask> Setup device temporar y ip mask in the d.
デバイスZyXEL Communications IDP 10の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
ZyXEL Communications IDP 10をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはZyXEL Communications IDP 10の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ZyXEL Communications IDP 10の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ZyXEL Communications IDP 10で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ZyXEL Communications IDP 10を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はZyXEL Communications IDP 10の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ZyXEL Communications IDP 10に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちZyXEL Communications IDP 10デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。