Blackberryメーカー1902Gの使用説明書/サービス説明書
ページ先へ移動 of 28
RIM OEM Radio Modem for GSM/ GPRS W ireless Netw orks RIM 1902G™ and RIM 1802G™ Getting Star ted Guid e Ve r s i o n 1 . 2.
RIM OEM Radio Modem fo r GSM/GPRS W ireless Netw orks V ersion 1.2 Getting Started Guid e Last revised: 08 August 2003 P art number: PDF-05732-004 MA T -06067-001 The information in this document is RIM confid ential and is for intern al distributi on only .
Getting Started Gui d e 3 Contents About this guide .............. ........ .............................................. .......................... 5 Related resources ...... ............... .............. .... ....... ............... ..............
4 RIM OEM Radio Modem for GSM/GPRS Wireless Networks.
About this guide This guide provi des information on the following topics: • setting up the Interface and T est Board • connecting the radio modem to your computer This guide is intended to help y ou start testing the RIM 1902G™ or RIM 1802G™ radio modems.
About this guide 6 RIM OEM Radio Modem for GSM/GPRS Wireless Networks.
Chapter 1 S etting up the In ter face and T est Board This guide provi des information on the following topics: • Setup ove rview • Connecting the SIM card • Connecting the radio modem • Conne.
Chapter 1: Setting up the Interface and T est Board 8 RIM OEM Radio Modem for GSM/GPRS Wireless Networks Setu p o v e rview T o set up the Interface and T est Board, perform these tasks: 1.
Connecting the SIM card Getting Started Gui d e 9 C onnecting the SIM card The 6-pin flat SIM interface ca ble carries the data and pow er between the Interface and T est Board SIM slot and the radio modem.
Chapter 1: Setting up the Interface and T est Board 10 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks C onnecting the radio modem The 22-pin flat interface cable supplies clean, regu lated pow er to the radio and carrie s most of the data and all of the voice between the Interface and T est Board and the radio modem.
Inserting the SIM card into the SIM card holder Getting Started Gui d e 11 Inser ting the SIM card int o the SIM card holder 1. If you are using t he on-board SIM configuration, turn the test board ov er to reveal the cut-out that provides access to the SIM card holder on the unde rside of the radio m odem.
Chapter 1: Setting up the Interface and T est Board 12 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks 2. Slide the SIM card holder in the direction o f th e arrow to unlock it, and then lift the cover open. 3. Slide the SIM card into the cover with the cond uctiv e side facing the leads on the board.
Chapter 2 C onnec ting the radio modem to a c omputer T o enable the radio modem to communicate wi th your co mpu ter, yo u m ust add th e r adi o modem to your computer , and add a dial-up network connection for the modem.
Chapter 2: C onnecting the radio modem to a computer 14 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks Required inf ormation Before you start, determine the access point name (APN) of your netw ork.
Connecting with Window s 2000 Getting Started Gui d e 15 5. Select the Don't detect my modem option. Click Next . The model selection window appears, as shown in the followin g diagram. Install New Modem window – m odel selection 6. In the Models list, selec t Standard 33600 bps modem .
Chapter 2: C onnecting the radio modem to a computer 16 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks 9. On the Modems tab, select the modem that y ou added and click Properties . The Properties window appears. Modem Propert ies window – G eneral tab 10.
Connecting with Window s 2000 Getting Started Gui d e 17 12. In the Extra initialization commands field, type: at+cgdcont=1,"IP"," apn_name " where apn_name is the access point name (APN) for your network 13. Click OK . The Phone and Modem Options window appears.
Chapter 2: C onnecting the radio modem to a computer 18 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks 13. Click Finish . The new connection appears in the Ne twork and Dial-up Connections window . 14. Right-click the new connection icon and click Properties .
Connecting with Window s 2000 Getting Started Gui d e 19 18. Click OK . The Properties window appears. 19. Click the General tab and click Configure . The Modem Configuration window appears. 20. From the Maximum speed (bps) drop-down menu, select 115200 .
Chapter 2: C onnecting the radio modem to a computer 20 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks Change registry settings P erform the following steps so that the mo dem disconnects and re connects correc tly . 1. In a command prompt, type: regedit The Registry Editor appears.
Connecting with Window s 2000 Getting Started Gui d e 21 3. Double-click on the 1 val u e . 4. In the Value data field, type: +++ 5. Click OK . 6. On the Edit menu, click New > String Value . A new entry appears under the Name column in the Registry Editor window .
Chapter 2: C onnecting the radio modem to a computer 22 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks C onnecting with Windo ws 95/98 Y ou must perform the following tasks to co nnect the radio modem to your computer: •a d d t h e m o d e m • add a dial-up connection Add a modem 1.
Connecting with W indows 95/98 Getting Started Gui d e 23 Add a c onnection 1. On the Start menu, cl ick Programs > Accessor ies > Commu nications > Dial-Up Networking . 2. Double-click the Make New Connection icon. 3. T ype a descriptive na me for the connection.
Chapter 2: C onnecting the radio modem to a computer 24 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks Modem Properties window – Connection tab 9. Set the fields to the following values: •F r o m t h e Data bits dro p-down li st, select 8 . •F r o m t h e Parity drop-down list, select None .
Connecting with W indows 95/98 Getting Started Gui d e 25 13. Click OK . The Make New Connec tion window appears. 14. Click Next . 15. In the Telephone number field, type *99# . Click Next . 16. Click Finish . The new connection appears in the Netw ork and Dial-up Connections window .
Chapter 2: C onnecting the radio modem to a computer 26 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks Setting up HyperT erminal Y ou can use HyperT erminal to send A T c ommands to the OEM radio modem. 1. On the Windows Start menu, click Pr ograms > Accessorie s > Communications > HyperTerminal .
.
© 2002 Research In Motion Limited Published in Canada.
デバイスBlackberry 1902Gの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Blackberry 1902Gをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBlackberry 1902Gの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Blackberry 1902Gの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Blackberry 1902Gで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Blackberry 1902Gを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBlackberry 1902Gの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Blackberry 1902Gに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBlackberry 1902Gデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。