Bolensメーカー52068 - 5HPの使用説明書/サービス説明書
ページ先へ移動 of 24
Model 52068 - 5HP Recoil Start 52069 - 6HP Electric Start OWNER’S MANUAL T rimmer/Mower • Safety • Assembly • Controls • Operation • Maintenance • Parts List GARDEN WAY INCORPORATED SAFETY FIRST! Before operating this equipment, read this Owner's Manual and the separate manual supplied by the engine manufacturer .
Dear Owner: You now own one of the finest trimmer/mowers available. It was designed to easily handle a wide variety of trimming, mowing and clearing chores. You will find the machine to be an invaluable tool in caring for your property. Please carefully read this Manual.
Safety 1 Section 1 Figure 1-1 - Electric start model shown. Trimmer Head Control Bail Cutting Height Settings Engine Throttle Control Lever Handlebar Height Adjuster Keyswitch (Electric Start Model) GENERAL OPERA TION 1. Read, understand, and follow all instructions on the machine and in the manuals.
2 Section 1: Safety 20. Always wear approved safety gog- gles or safety glasses with side shields when operating equipment. The use of any powered machine can result in for- eign objects being thrown by high-speed rotating parts which can cause personal injury or property damage.
Section 1: Safety 3 SAFETY DECALS For your safety and the safety of others, various safety and operational decals are located on your unit (see below). Keep the decals clean and legible at all times. Contact your local service dealer or the factory for replacements if any decals are damaged or missing.
Assembly 2 Section 4 INTRODUCTION Carefully follow these assembly steps to correctly prepare your machine for use. It is recommended that you read this Section in its entirety before beginning assembly. NOTE: If an assembly step applies only to certain models, those models are noted at the beginning of that step.
Section 2: Assembly 5 5. Use two cable ties (F, Figure 2-2) to secure the trimmer head control cable (C) and the electrical wiring harness (O) to the handlebar at the locations shown. STEP 3: A TT ACH THROTTLE CONTROL LEVER 1 . One end of the Throttle Control Cable (H, Figure 2-3) is attached to the engine.
6 Section 2: Assembly STEP 6: CONNECT AND CHARGE BA TTERY (ELECTRIC ST ART MODELS) 1 . Lift and tilt debris shield (X, Figure 2- 5) forward to view battery (P). Connect the red wire (R, Figure 2-6) to the positive (+) red-coded terminal on the battery.
Features and Controls 3 Section 7 OPERA TING SYMBOLS Various symbols (shown here, with word descriptions) are used on the unit. STOP FEA TURES AND CONTROLS This Section describes the location and function of the features and controls on your machine. Refer to the following Operation Section for detailed operating instructions.
Operation 4 Section 8 INTRODUCTION Read this Section thoroughly before you start the engine. As with any piece of outdoor power equipment, getting the “ feel ” for how your machine operates and knowing the best techniques for partic- ular jobs are important to overall good performance.
Section 4: Operation 9 USE THE CORRECT DIAMETER TRIMMER LINE Before starting a project, examine the grass or material you will be cutting and trimming. For tougher conditions, use two (or four) sections of the thicker gauge, .155" diam- eter extra-heavy duty line.
10 Section 4: Operation ADDITIONAL OPERA TING TIPS AND TECHNIQUES TIPS FOR PRECISION CUTTING For the most precise cutting possible, be sure to select the appropriate line cutting height and trimmer line size (thickness) for the conditions at hand. When mowing, let the cutting head rest lightly on the ground and do not lift up on the handlebars.
Maintenance 5 Section 11 ADJUSTING TRIMMER HEAD ENGAGEMENT The tension on the drive belt must be correct for proper operation of the trimmer head. If the tension is correct, the trimmer head will rota.
12 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.
Section 5: Maintenance 13 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.
14 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.
Section 5: Maintenance 15 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.
16 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.
Section 5: Maintenance 17 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.
18 Parts List Models 52068 & 52069 DRA WING NO. 1 1 2 3 4 5 5 5 5 5 5 7 8 9 10 11 12 13 26 17 17 17 16 20 21 22 23 24 25 15 18 19 14 14 6 6.
Parts List 19 Models 52068 & 52069 1 1917765 Debris Guard ............................................ 1 2 1918741 Decal-Logo .............................................. 1 3 1918415 Push-in Fastener ....................................... 5 4 1917407001 Debris Guard Support .
20 Parts List Models 52068 & 52069 DRA WING NO. 2 See DRAWING NO. 1 See DRAWING NO. 3 See ACCESSORIES AND KITS 2 2 1 1 3 3 4 7 8 9 10 11 12 13 14 15 16 27 17 18 22 23 24 25 26 18 18 19 20 21 6 1 1917778 Wheel/Tire Assembly ........................
Parts List 21 Models 52068 & 52069 DRA WING NO. 3 1 4 5 2 3 6 6 8 7 9 12 13 13 13 14 15 16 14 10 11 1 1918283 Upper Handlebar (Incl. Refs. 2 & 3) ....... 1 2 1915889 Decal – Bail Engage/Disengage ................ 1 3 1918304 Decal – Throttle .
1905587 (2/01) Printed in U.S.A. © 2001 Garden Way Incorporated CUSTOMER SERVICE INFORMA TION Owner Registration Card Please fill out and mail the enclosed owner registration card. The purpose of this card is to register each unit at the factory so that we can provide you with warranty benefits and informational bulletins.
デバイスBolens 52068 - 5HPの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Bolens 52068 - 5HPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBolens 52068 - 5HPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Bolens 52068 - 5HPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Bolens 52068 - 5HPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Bolens 52068 - 5HPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBolens 52068 - 5HPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Bolens 52068 - 5HPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBolens 52068 - 5HPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。