HuffyメーカーM732211の使用説明書/サービス説明書
ページ先へ移動 of 22
1 05/06 ID# M732211 Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-632 7921 Internet Address: http://www.
2 ID# M732211 05/06 Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net.
05/06 ID# M732211 3 522730 06/05 MOVING SYSTEM HEIGHT ADJUSTMENT TO RESET OR REPOSITION BACKBOARD: 1. Grasp handle firmly and pull down to raise rim P AST highest position (above 10 feet). 2. While still holding handle firmly , CAREFULL Y lower rim to lowest position.
4 ID# M732211 05/06 IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside. NOTICE T O ASSEMBLERS Adult Assembly Required. Dispose of ALL packaging materials promptly . As with all products, periodically inspect for loose small part s.
05/06 ID# M732211 5 Get to know the basic parts of your basketball system... RIM POLE BASE BACKBOARD FRONT VIEW ELEVATOR ADJUSTMENT SUPPORT STRUT.
6 ID# M732211 05/06 P ARTS LIST - See Hardware Identifier NOTE: Hardware kit is designed for more than one style of basketball system. Not all hardware will be used.
05/06 ID# M732211 7 * You may have extra parts with this model. HARDW ARE IDENTIFIER (BOL TS & PINS) Item #12 (6) Item #13 (1) Item #15 (2) Item #14 (1) Item #9 (2) Item #18 (2) Item #38 (7) Item .
8 ID# M732211 05/06 Item #32 (1) Item #31 (1) HARDW ARE IDENTIFIER (STEEL SP ACERS & RODS) HARDW ARE IDENTIFIER (PLASTIC SP ACERS & CLIPS) HARDW ARE IDENTIFIER (OTHER) Item #44 (2) Item #7 (1).
05/06 ID# M732211 9 ITEMS REQUIRED FOR THIS SECTION This is what your system will look like when you’ve finished this section. (2) 1/2” and (2) 9/16" Wrenches 9/16” 1/2” (2) Socket Wrenches and Socket s SECTION A: ASSEMBLE THE BASE 1. Correctly identify each pole section and mark indicated distance from ends with tape as shown.
10 ID# M732211 05/06 2. WOOD SCRAP (NOT SUPPLIED) 5 4 While maintaining alignment, bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.
05/06 ID# M732211 11 4 5 6 WOOD SCRAP (NOT SUPPLIED) RODS SHOWN ARE FOR VISUAL REPRESENTATION OF ALIGNMENT AND ARE NOT SUPPLIED WITH THE HARDWARE Align dimple of middle pole section (5) into trough of bottom pole section (6) as shown.
12 ID# M732211 05/06 4. 5. Install wheel axle (2) through wheel carriage (19) and install wheels (3) onto wheel axle (2) with sp acers (17) as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole (6) section to tank and wheel carriage as shown.
05/06 ID# M732211 13 11 12 12 10 6 6 10 1 13 6. Secure base struts (10) to pole using bolt (1 1), washers (12), and nut (13), as shown. Rotate the non-secured ends of base strut s (10) as shown. 7. Secure both base struts (10) to base using bolts (15), washers (12), and nuts (16).
14 ID# M732211 05/06 This is what your system will look like when you’ve finished this section. (2) 1/2”, (2) 9/16” and (2) 3/4” Wrenches 9/16” 1/2” 3/4” (2) Socket Wrenches and Socket s ITEMS REQUIRED FOR THIS SECTION SECTION B: A TT ACH THE BACKBOARD AND/OR Fit spacer (44) into p awl (27).
05/06 ID# M732211 15 2. Identify elevator tubes (43). T oward Board T oward Pole 43 Elevator T ubes Assemble elevator tubes (43) to ratchet (28) and backboard brackets (29) as shown.
16 ID# M732211 05/06 4 . Secure pawl (27) in place with clevis pin (34) and washers (18) as shown. 18 34 18 27 5 . S tretch spring (40) into position with pliers.
05/06 ID# M732211 17 29 50 16 16 51 43 50 32 36 32 W ARNING! USE CAUTION; ELEV A TOR ASSEMBL Y IS HEA VY . TWO CAP ABLE ADUL TS REQUIRED FOR THIS PROCEDURE. F AILURE TO FOLLOW THIS W ARNING COULD RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Insert “T” bolt (36) through Slam Jam bracket (32) as shown.
18 ID# M732211 05/06 38 43 43 42 42 38 22 4 8. Support pole on sawhorse. Attach upper and lower elevator tubes (43) to upper pole section (4) using bolts (42) and nut s (38) as shown. Attach pole cap (22) as shown. Attach upper elevator tubes (43) to backboard support bracket s (29) using spacers (41), bolt (42), and nut (38) as shown.
05/06 ID# M732211 19 42 33 33 47 38 42 33 47 38 9. Attach outer handle tube (47) to upper elevator tubes (43) using bolt (42) sp acers (33) and nut (38) as shown. Attach outer handle tube (47) to lower elevator tubes (43) using bolt (42) sp acers (33) and nut (38) as shown.
20 ID# M732211 05/06 47 48 48 46 11 . Slide inner handle tube (48) into outer handle tube (47) as shown. 12. Secure inner handle tube (48) to outer handle tube (47) using screws (20) as shown.
05/06 ID# M732211 21 13. Inst all Rim to Backboard A. Fit rim (21) securely into bracket (32) as shown. Allow T -bolt (36) to slip through center hole in rim (21). B. Install reinforcement bracket (31) onto T -bolt (36) as shown. C. Install spring (30) onto T -bolt (36) as shown.
22 ID# M732211 05/06 15. Roll the completed assembly to the desired playing area. Fill tank with 33 gallons of water . Secure plug caps (24) into place. 16. Apply the height adjustment and moving label (25) to the front of the pole as shown. 24 24 10 ft.
デバイスHuffy M732211の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Huffy M732211をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHuffy M732211の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Huffy M732211の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Huffy M732211で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Huffy M732211を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHuffy M732211の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Huffy M732211に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHuffy M732211デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。