JVCメーカーKS-FX611の使用説明書/サービス説明書
ページ先へ移動 of 24
INSTRUCTIONS !" §”·π–π” GET0056-001A [U] For installation and connections, refer to the separate manual. !"#$%&'()*+,-.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. BEFORE USE * For safety .... • Do not raise the volume level too much, as this will block outside sounds, making driving danger ous.
3 ENGLISH Scan Music Mult i MO DISP DI SP SCAN SC AN LOUD LO UD 89 1 0 11 12 7 CD CHANGER CONTROL CD C HA NG ER C ON TR O L 1 8 7 23 4 o 6 9 p q yu r e t w 5 i k s l/ a d j ; f g h LOCA TION OF THE BU.
4 ENGLISH 4 ENGLISH BASIC OPERA TIONS 3 Adjust the volume. T o increase the volume. T o decrease the volume. V olume level indicator V olume level appears 4 Adjust the sound as you want. (See page 10 – 12) T o drop the volume in a moment Press briefly while listening to any source.
5 ENGLISH 5 ENGLISH Listening to the radio 1 Select the band (FM1 – 3, AM). Y ou can select any one of FM1, FM2, and FM3 to listen to an FM station. FM1 FM2 FM3 AM Selected band appears Audio or volume level indicator (see page 14) 2 Start searching a station.
6 ENGLISH 6 ENGLISH Storing stations in memory Y ou can use one of the following two methods to store broadcasting stations in memory . • Automatic preset of FM stations: SSM (Strong- station Sequen.
7 ENGLISH 7 ENGLISH Other convenient tuner functions Scanning broadcast stations When you press SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcasted.
8 ENGLISH T APE OPERA TIONS Listening to a cassette Y ou can playback type 1 (normal) tapes. 1 Insert a cassette. The unit turns on and tape play starts automatically . When one side of the tape reaches its end during play , the other side of the tape automatically starts playing.
9 ENGLISH During playback Specify how many tunes ahead or before the current tune the tune you want is located. T o locate a tune ahead of the current tune on the tape T o locate a tune before the current tune on the tape Each time you set the tune, the number changes up to ±9.
10 ENGLISH Adjusting the sound Y ou can adjust the treble/bass sounds and the speaker balance. 1 Select the item you want to adjust. Indication T o do: Range BAS Adjust the bass – 06 (min.) (bass) | +06 (max.) TRE Adjust the treble –06 (min.) (treble) | +06 (max.
11 ENGLISH Using the Sound Control Memor y Y ou can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM) Selecting and storing the sound modes Once you select a sound mode, it is stored in memory , and will be recalled every time you select the same source.
12 ENGLISH 1 Press and hold SEL for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK”, “LEVEL”, “B.SKIP” or “EXT IN * ” appears on the display . ★ Displayed only when one of the following sour ces is selected—FM, AM and T APE.
13 ENGLISH 2 Adjust the minute. 4 Finish the setting. T o check the current clock time (changing the display mode) Press DISP repeatedly . Each time you press the button, the display mode changes as follows. • If the unit is not in use when you press DISP , the power turns on, the clock time is shown for 5 seconds, then the power turns off.
14 ENGLISH Selecting the level display T o select the level meter – LEVEL Y ou can select the level display according to your preference. When shipped from the factory , “AUDIO 2” is selected. • AUDIO 1: Level meter illuminates from bottom to top.
15 ENGLISH How to attach the contr ol panel 1 Insert the left side of the control panel into the groove on the panel holder . 2 Press the right side of the control panel to fix it to the panel holder . Note on cleaning the connectors: If you fr equently detach the contr ol panel, the connectors will deteriorate.
16 ENGLISH REMOTE OPERA TIONS Installing the battery When the controllable range or effectiveness of the remote controller decreases, replace the battery . 1 Remove the battery holder . 1) 2) 1) Push out in the direction indicated by the arrow using a ball point pen or a similar tool.
17 ENGLISH Using the remote controller 1 2 3 4 6 7 5 RM-RK31 1 Functions the same as the button on the main unit. 2 • Functions as the BAND button while listening to the radio. Each time you press the button, the band changes. • Functions as the DISC + button while listening to the CD changer .
18 ENGLISH Scan Music Mult i MO DISP DI SP SCAN SC AN LOUD LO UD 89 1 0 11 12 7 CD CHANGER CONTROL CD CHA NG ER CO NTR OL CD CHANGER OPERA TIONS We recommend that you use one of the CH-X series with your unit. If you have another CD automatic changer , consult your JVC car audio dealer for connections.
19 ENGLISH Selecting CD playback modes T o play back tracks at random (Random Play) MO Each time you press MO RND (Mono/Random) while playing a CD, CD random play mode changes as follows: RND1 RND2 Canceled (Random1) (Random2) Mode RND Indicator Plays at random RND1 Lights All tracks of the current disc, then the tracks of the next disc, and so on.
20 ENGLISH EXTERNAL COMPONENT OPERA TIONS Y ou can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied). Preparations: • For connecting the Line Input Adaptor KS-U57 and the external component, r efer to the Installation/ Connection Manual (separate volume).
21 ENGLISH Selecting the external component to use Y ou can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied). T o use the external component as the playback source through this receiver , you need to select which device — CD changer or external component — to use.
22 ENGLISH MAINTENANCE This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below . T o clean the heads • Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store).
23 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center . Symptoms • A cassette tape cannot be inserted. • Cassette tapes become hot. • T ape sound is at very low level and sound quality is degraded.
24 ENGLISH AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 40 watts per channel Rear: 40 watts per channel Continuous Power Output (RMS): Front: 16 watts per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 16 watts per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.
デバイスJVC KS-FX611の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC KS-FX611をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC KS-FX611の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC KS-FX611の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC KS-FX611で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC KS-FX611を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC KS-FX611の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC KS-FX611に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC KS-FX611デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
