Monessen HearthメーカーDESIGNER SERIESの使用説明書/サービス説明書
ページ先へ移動 of 26
DESIGNER SERIES 624BVSTNV/624BVSTNE, 624BVPFNV/624BVPFNE 624BVCLNV/624BVCLNE, 624BVCRNV/624BVCRNE, 624BVBYNV/624BVBYNE B-V ENT S PECIAL TY G AS F IREPLACE S YSTEM I NST ALLA TION , O PERA TION AND M AINTENANCE M ANUAL D O NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE V APORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE .
"W ARNING : I F NOT INST ALLED , OPERA TED AND MAINT AINED IN ACCORDANCE WITH THE MANUF A TURER ’ S INSTRUCTIONS , THIS PRODUCT COULD EXPOSE YOU TO SUBST ANCES IN FUEL OR FROM FUEL COMBUSTION W.
T ABLE OF C ONTENTS 2 C22 C ONGRA TULA TIONS ! Y ou have chosen the finest decorative gas appliance available. Y our 6- IN -1 ™ Specialty Gas Fireplace has been designed for years of heating and viewing enjoyment. Please take time to read this entire manual before installing or operating your system.
P ARTS D IAGRAM 3 MV MV PV PV N O C F F O 16 16 15 15 7 17 17 19 19 18 18 9 6 5 8 4 3 11 11 13 13 12 12 14 14 10 10 2 14 14 1 13 13 ON OFF PILOT TH TPTH TP 53D9019.
P ARTS L IST 4 All repair part orders should be placed through your local dealer . T o ensure prompt and accurate service, please provide the following information when placing a repair part order: Model num- ber of your Fireplace, Part Name, Part Number , and Quantity of parts needed.
The table below is a list of components which may be safely used with this product. Configuration Kits 6BK Bay Kit 6CK Corner Kit (works for left or right side) 6IK Island Kit 6PNK Peninsula Kit 6SK S.
F IREPLACE C ONFIGERA TION I NST ALLA TION 6 P ART 1 Remove front glass door by removing the cardboard fillers at the top and lifting up and away from the appliance.
23 1/8 FRAMING FRAMING DIM. FOR DIM. FOR SEE THRU SEE THRU 42 3/8 42 3/8 42 1/2 42 1/2 (FRAMING MIN.) (FRAMING MIN.) (ALL UNITS) (ALL UNITS) 1 1/2 MIN.
To accommodate the various configurations, we have provided access openings in the bottom of the unit for gas line and wall switch wires. This may not be convenient for some installations, if so you may drill an access opening into the lower face of the unit (1" for gas line, 1/2" for the grommet).
F IREPLACE I NST ALLA TION AND V ENTING 9 F IGURE 5F IGURE 6 APPROVED APPROVED COWL COWL MIN. MIN. 6 FT. 6 FT. SUPPORT SUPPORT 4 FT. 4 FT. MAX. MAX. APPROVED THIMBLE FOR APPROVED THIMBLE FOR 6" T.
V ENTING R EQUIREMENTS 10 W ARNING : D O NOT CONNECT THIS APPLIANCE TO A CHIMNEY FLUE SERVING A SEP ARA TE SOLID FUEL BURNING APPLIANCE . C ARBON DEPOSITS (S OOT ) AND CREOSOTE FROM SOLID FUELS CAN CLOG THE VENT FROM THE APPLIANCE CAUSING POISONOUS CARBON MONOXIDE TO BE RELEASED INT O THE ROOM IN WHICH THE APPLIANCE IS INST ALLED .
LOGS AND TWIGS. LOGS AND TWIGS. TOP VIEW OF TOP VIEW OF Curing Instructions Note: When lit for the first time the fireplace may emit a slight odor for several hours. This is due to the curing and "burn in" of external parts and lubricants used in the manufacturing process.
Units with 6CEN Controls 1. Determine a convenient location within twenty (20) feet and cut a hole large enough to accommodate the wall switch yet be covered with a wall plate. It is not necessary to use a wall box, but one may be used. 2. Route the wire provided through the 1/2 inch black plastic grommet in the unit.
Pilot Burner Adjustment 1. Adjust the pilot screw to provide a properly sized flame. 2. Do not adjust the pilot screw all the way out counterclockwise because it will leak gas.
Maintenance of the Appliance Air flowing through the appliance will cause dust and lint to collect on the grate, burner and logs. Exessive buildup of dust and lint can cause the pilot and burner to operate improperly and produce hazardous levels of carbon monoxide, a poisonous gas.
15 C OMBUSTION A IR P RECAUTIONS N OTE : The use of outside air for combustion is optional unless required by building codes. It is only necessary to supply outside combustion air to one side of the fireplace. Use the model OAC4 combustion air kit. 1.
C OMBUSTION A IR A SSEMBL Y 16 M ODEL AK4 C OMBUSTION A IR A SSEMBL Y 1. Remove the cover plate from the 4-inch outlet opening location on the left outside of the fireplace. DO NOT remove the cover if the outside air will not be connected. 2. Place the starting collar (4 inch) into the hole on the left side of the fireplace.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS WARNING: FOR YOUR SAFETY READ BEFORE LIGHTING FOR YOUR SAFETY READ BEFORE LIGHTING ON OFF TO TURN OFF GAS TO APPLIANCE TO TURN OFF GAS TO APPLIANCE KNOB KNOB INDICATOR INDICATOR POSITION POSITION GAS CONTROL GAS CONTROL THE FIRE DEPARTMENT.
O PERA TING I NSTRUCTIONS 18 C. C. D. D. LIGHTING INSTRUCTIONS FOR YOUR SAFETY READ BEFORE LIGHTING IF YOU CANNOT REACH YOUR GAS SUPPLIER, CALL IF YOU CANNOT REACH YOUR GAS SUPPLIER, CALL THE FIRE DEPARTMENT. USE ONLY YOUR HAND TO PUSH IN OR TURN THE GAS USE ONLY YOUR HAND TO PUSH IN OR TURN THE GAS CONTROL KNOB.
Correct installation and safe operation of this appliance require, but are not limited to the following: Do's: 1. Do use this appliance only on type of gas it is designed, certified and equipped.
T ROUBLESHOOTING 20 While the manufacturer has made every reasonable effort to ensure that this appliance operates properly and satisfactorily , sometimes problems do arise. The following troubleshooting chart lists several problems with their probable cause and remedy .
NOTE REGARDING VENTED PRODUCTS This product must be installed by a licensed plumber or gas fi tter when installed within the Commonwealth of Massachusetts.
SPECIAL REQUIREMENTS CONTINUED 2. APPROVED CARBON MONOXIDE DETECTORS. Each carbon monoxide detector as required in accor- dance with the above provisions shall comply with NFP A 720 and be ANSI/UL 2034 listed and IAS certi- fi ed.
N OTES 21 53D9019. Rev 3 11/07.
N OTES 22 53D9019. Rev 3 11/07.
A TTENTION A PPLIANCE I NST ALLER P LEASE RETURN THESE O PERA TING AND I NST ALLA TION I NSTRUCTIONS TO THE A PPLIANCE FOR C ONSUMER U SE . 53D9019. Rev 3 11/07.
デバイスMonessen Hearth DESIGNER SERIESの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Monessen Hearth DESIGNER SERIESをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMonessen Hearth DESIGNER SERIESの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Monessen Hearth DESIGNER SERIESの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Monessen Hearth DESIGNER SERIESで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Monessen Hearth DESIGNER SERIESを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMonessen Hearth DESIGNER SERIESの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Monessen Hearth DESIGNER SERIESに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMonessen Hearth DESIGNER SERIESデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
