PanasonicメーカーAW-PH405Nの使用説明書/サービス説明書
ページ先へ移動 of 32
Bef ore operating this product, please read the instructions carefully and sav e this manual f or future use . Operating Instructions Indoor P an-tilt Head Model No .
2 indicates saf ety inf or mation. This class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la c lasse A est conforme à la norme NMB-003 du Canada.
3 indicates saf ety inf or mation. 1) Read these instr uctions. 2) Keep these instructions. 3) Heed all war nings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dr y cloth. 7) Do not b lock any ventilation openings.
4 Contents Safety precautions ................................................................................................................................................ 2 Operating precautions ....................................................
5 Operating precautions Handle the unit carefully . Dropping the unit or subjecting it to strong impact may give rise to malfunctioning or accidents. T urn off the power before connecting or disconnecting the cables. Be absolutely sure to tur n off the power bef ore connecting or disconnecting the cables .
6 Accessories Operating instructions ..................................................... 1 Rotary arm ......................................................................... 1 Camera mounting base ..................................................
7 P ar ts and their function.
8 Rotary head This rotates in the horizontal direction. Pedestal PO WER ON/OFF switch Where a s witch is pushed in, the unit’ s power is turned on, and the unit’ s power is turned off after the switch has jumped out. A C inlet [A C IN] (AC 3-point inlet) Connect the accessor y A C power cab le to this inlet.
9 P ar ts and their function Rotary head connector panel ND/EXT connector [ND/EXT] This is f or the control of the ND filter and lens extender of the motorized lens unit. Connect this connector when using a motorized lens unit with ND filter and lens e xtender functions.
10 P ar ts and their function P edestal connector panel CONTROL IN RP connector [RP] This is the connector f or the control of signals of the camera and pan-tilt head. It is connected to the TO P AN/TIL T HEAD connector on the A W-RP655 m ulti-function controller and A W-RP555 multi h ybr id control panel.
11 Installation For a stand-alone installation Assemb ling the pan-tilt head When assembling the pan-tilt head, use the Allen k ey (provided) and scre wdriver , and secure the head by tightening the scre ws firmly . After mounting the pan-tilt head, check there is no pla y in its installation.
12 Installation Mounting the tally lamp Connect the cable connector which is taped to the top of the pan-tilt head to the tally cab le connector. Mount the tally lamp on the top of the pan-tilt head using the two scre ws provided. Mount the lamp while pa ying attention to the wire.
13 Installation Concerning the saf ety modes This unit comes with two saf ety modes which are designed to safeguard the user and others from injury and to prev ent damage to the pan-tilt head.
14 Installation Pr ocedure for changing the settings of the CPU cir cuit board s witches F ollow the steps below to change the settings of the CPU circuit board s witches. Remo ve the f our screws, and gently remo v e the housing case. Disconnect the tally cab le connector .
15 Installation Setting the CPU cir cuit board s witches Setting SW1 These s witches are used to set the operations of the A W -PH405. Before changing their settings , make sure that the po wer has been turned off. No.1: Auto f ocus (AF)/extender (EXT) selector s witch.
16 Installation P an-tilt head mounting conditions Pan-tilt head weight Mounting specifications Compatible cameras Camera weight Camera anti-drop measures Compatible lenses Lens weight Cable weight T otal weight Approx.
17 Installation Note When installing the pan-tilt head, do not forcib ly tur n the rotar y head or rotar y ar m manually . Doing so may result in malfunctioning.
18 Mounting the camera [Convertible camera A W-E350/E650/E655/E750/E860 ] When mounting the camera, tak e sufficient care to ensure that the camera will not come off or f all down. Mount the lens onto the convertible camera. (Bef ore mounting a large lens, consult with y our dealer .
19 Installation Attaching the wire [Convertible camera A W-E350/E650/E655/E750/E860 ] The camera comes with a wire f or prev enting the camera from dropping.
20 Installation Mounting the camera [Multi-purpose camera AK-HC1500G ] When mounting the camera, tak e sufficient care to ensure that the camera will not come off or f all down. Mount the lens onto the multi-pur pose camera. (1) Lenses that can be used • Use any of the portable lenses which are listed below .
21 Concerning the balance of the installed unit The weight balance ma y be impaired when the pan-tilt head is used in combination with a camera and long lens.
22 Installation Bear ing in mind the length of the lens, set the mov ement range of the pan-tilt head using the limiters in such a wa y that the hood at the edge of the lens will not come into contact with the surf ace on which the pan-tilt head is installed when the pan-tilt head is tilted.
23 Installation Attaching the wire [Multi-purpose camera AK-HC1500G ] The camera comes with a wire f or prev enting the camera from dropping. F ollow the instructions below to use it to couple the camera to the pan-tilt head.
24 Connections T ur n off the power of all the equipment bef ore proceeding with the connections. Connect the A C power cab le supplied with the AW -PH405 f or the A W-PH405 indoor pan-tilt head.
25 Connections For the AK-HC1500G Use the connecting cables belo w to connect the pan-tilt head and camera. A W-CA15H29G Ref er to the operating instructions for using the connecting cab le to ensure that it is connected proper ly .
26 Cable specifications When connecting a Fujinon extender c hange unit SHELL CVCC (12 V) CGND EXT Return EXT Signal ND Return ND Signal CanonEXT ( ) CanonEXT ( ) GND GND Connector: HR10A-10P-.
27 Replacing the consumable parts Replacing the motor Replace the motor when it ceases to operate properly . F or details on the motor replacement, consult your dealer . Replacing the belt Replace the belt when the preset stop accuracy has deteriorated.
28 Appearance Unit: inch (mm) 5-3/8 (137) 7-3/16 (182) 12-9/16 (319) 6-1/2 (165) 8-1/4 (209) 16-3/8 (416) 6-5/8 (168) ø6-5/16 (160) 1-5/8 (42) ø5-3/4 (146) ø6-5/16 (160) ø5-3/4 (146) 4-M6 screws &.
29 Specifications Genlock input: BNC Black b urst or composite video signal, T r i Sync Prompter input (PROMPTER IN): BNC Through output to PROMPTER connector Prompter output (PROMPTER OUT): D-SUB 15-.
30 Memo — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — .
31 Memo — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — .
P ANASONIC BRO ADCAST & TELEVISION SYSTEMS COMP ANY UNIT COMP ANY OF P ANASONIC CORPORA TION OF NORTH AMERICA Executive Office: One P anasonic W ay 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN .
デバイスPanasonic AW-PH405Nの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic AW-PH405Nをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic AW-PH405Nの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic AW-PH405Nの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic AW-PH405Nで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic AW-PH405Nを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic AW-PH405Nの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic AW-PH405Nに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic AW-PH405Nデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
