RegencyメーカーI3100Lの使用説明書/サービス説明書
ページ先へ移動 of 20
FPI FIREPLACE PRODUCTS INTERNA TIONAL L TD. 6988 V enture St., Delta, BC Canada, V4G 1H4 908-332b MODELS: H2100 I3100L WOOD Fireplace Insert & Hearth Heater 03/06/08 Owners & Installation Manual T ested by: Installer : Please complete the details on the back cover and leave this manual with the homeowner .
Regency Wood Insert & Hearth Heater 2 Thank-you for purchasing a REGENCY FIREPLACE PRODUCT . The pride of workmanship that goes into each of our products will give you years of trouble-free enjoyment. Should you have any questions about your product that are not covered in this manual, please contact the REGENCY DEALER in your area.
Regency Wood Insert & Hearth Heater 3 REGENCY FIREPLACE INSERTS & HEARTH HEA TER T ABLE OF CONTENTS SAFETY LABEL Safety Label For I3100L ................................................ 4 Safety Label For H2100M................................
Regency Wood Insert & Hearth Heater 4 LISTED F ACTORY BUIL T FIREPLACE INSERT CERTIFIED FOR USE IN CANADA AND U.S.A. MODEL: I3100L TESTED TO: ULC S628-M93 / UL 1482-1998 / ULC S627-00 / UL 737-2000 REPORT NO. 632-323500 (MAR.1994) DO NOT REMOVE THIS LABEL 106 COMPONENTS REQUIRED FOR INST ALLA TION: 6" (150mm) ST AINLESS STEEL LINER.
Regency Wood Insert & Hearth Heater 5 SAFETY LABEL This is a copy of the label that accompanies each Regency Hearth Heater . We have printed a copy of the contents here for your review . 103 DO NOT REMOVE BRICKS OR MORT AR IN MASONRY FIREPLACE. FOR USE WITH SOLID WOOD FUEL ONL Y .
Regency Wood Insert & Hearth Heater 6 INST ALLA TION CHIMNEY SPECIFICA TIONS Before installing, check and clean your chimney system thoroughly . If in doubt about its condi- tion, seek professional advice.
Regency Wood Insert & Hearth Heater 7 Clearance diagram for installations INST ALLA TION Side and T op facing is a maximum of 1.5" thick. Floor protection must non-combustible, insula- tive material with an R value of 1.1 or greater . * If the hearth extension is fl ush with the fl oor (F) it must extend 19.
Regency Wood Insert & Hearth Heater 8 1) Positive Flue Connection with Cleanout FLUE CONNECT OR BRACKET Package contains: 3 brackets and 6 screws. These brackets are to be used to hold the fl ue liner (not supplied) to the Insert and keep the connection.
Regency Wood Insert & Hearth Heater 9 INST ALLA TION Diagram 1: H2100M and I3100L Faceplate Assembly A) H2100M and I3100L Insert 1) Slide the spring nuts (supplied) over the slots in the insert’s side convection panels (the spring nuts may need to be squeezed with a pair of pliers fi rst, to help them stay in position).
Regency Wood Insert & Hearth Heater 10 Ground Fan Fan Ground Green Neutral Live White Fan Switch Manual/ Auto Switch Black Black High (Black) Low (Red) Black Fan Thermodisc (normally open) 120V AC 60 Hz Thermo Switch Sensor Thermo Switch Sensor INST ALLA TION F AN / BLOWER Blower/Fan Wiring Diagram 3) Slide the supports into the clips.
Regency Wood Insert & Hearth Heater 11 BRICK FLUE BAFFLE & SECONDAR Y AIR TUBE INST ALLA TION The fl ue baf fl e system located in the upper area of the fi rebox is removable to make cleaning your chimney system easier . The brick baf fl es must be installed prior to your fi rst fi re.
Regency Wood Insert & Hearth Heater 12 Pull Open Push Closed INST ALLA TION Hearth Heater (H2100M) Steel Baf fl e Place the insulation batt on top of the baf fl e. Make sure that this batt is laying fl at and does not obstruct the smoke from getting up the fl ue opening.
Regency Wood Insert & Hearth Heater 13 automatic temperature sensor will engage the blower when the unit is at temperature and will shut off the blower once the fi re has gone out and the unit has cooled to below a useful heat output range.
Regency Wood Insert & Hearth Heater 14 6) Do not permit creosote or soot buildup in the chimney system. Check and clean chimney at regular intervals. 7) Y our Regency Insert can be very hot. Y ou may be seriously burned if you touch the insert while it is operating.
Regency Wood Insert & Hearth Heater 15 I3100 MAIN ASSEMBL Y Part # Description 846-910 Door Assembly-Large Gold (I3100)-no glass 846-916 Door Assembly-Large Black (I3100)-no glass 3) 846-304 Glass.
Regency Wood Insert & Hearth Heater 16 P ARTS LIST I3100 F ACEPLA TES Part # Description Faceplate: I3100L 163-910 Faceplate & T rim Set - Regular 385) 163-165 Trim Right Regular 386) 163-160 .
Regency Wood Insert & Hearth Heater 17 H2100 MAIN ASSEMBL Y Part # Description Part # Description 1) 846-910 Door Assembly-Large Gold - no glass 846-916 Door Assembly-Large Black - no glass 3) 846.
Regency Wood Insert & Hearth Heater 18 P ARTS LIST I3100 & H2100 FIREBRICK Part # Description 70) 902-1 1 1 Brick Regular Full Size: 1-1/4" x 4-1/2" x 9" 71) 802-104 Brick Parti.
Regency Wood Insert & Hearth Heater 19 W ARRANTY Regency Fireplace Products are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance T e am carefully inspects each unit thoroughly before it leaves our door .
Printed in Canada Installer: Please complete the following information Dealer Name & Address: ______________________________________________ _______________________________________________________.
デバイスRegency I3100Lの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Regency I3100Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRegency I3100Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Regency I3100Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Regency I3100Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Regency I3100Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRegency I3100Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Regency I3100Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRegency I3100Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。