RussoundメーカーDIM-1の使用説明書/サービス説明書
ページ先へ移動 of 4
DIM-1 Doorbell Interface Module Instruction Manual TRIG OUT TRIG +12VDC DB3 DB2 DB1 TRANS POWER DOORBELL INTERF ACE.
Product Ov erview T he DIM-1 Doorbell Interface Module’ s primary purpose is to mute a multi- source/multi-zone audio system so a preexisting doorbell can be heard w hen it rings.
s witched contacts at the doorbell chime module to the connections labeled “DB1, ” “DB2” and “DB3” on the DIM-1. T his connects up to 3 separate doorbell buttons to the DIM-1. Refer to F igure 1. Note that the connectors can be unplugged for easy wiring.
Oper ating Instructions 1) P ower the doorbell system and your audio distribution system. 2) Plug the 12VDC power supply into the DIM-1. The red and green LED should be on. After 6 seconds the green LED will go out. 3) Ring the doorbell. T he green LED on the DIM-1 should illuminate for 6 seconds and then go out.
デバイスRussound DIM-1の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Russound DIM-1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRussound DIM-1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Russound DIM-1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Russound DIM-1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Russound DIM-1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRussound DIM-1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Russound DIM-1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRussound DIM-1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。