BajaメーカーHT65/165の使用説明書/サービス説明書
ページ先へ移動 of 25
HT65/MB165 M ini Bike Read this manual carefully . It contains impor tant safety information. No one under the age of 16 should operate this Mini Bike. Alway s wear a helmet; It could sav e your Lif e! Do not remove this opera tor ’ s manual from this vehicle .
Cong ratulations on y our purchase of the Baja Motorspor ts M ini Bike . Y our Mini bike is warranted to be free of manufacturing defects in the material of workmanship for a period of 90 day s form the date of purchase .
This manual should be consider ed as a permanent par t of the vehicle and should r emain with the vehicle when resold or otherwise transferred to a new user or oper ator . The manual con tains impor tant safety information and instructions which should be read carefully bef ore operating the v ehicle.
SA F E O P ER A T IO N ............................................................................... 3 SA F E T Y G E AR ...................................................................................... 4 MO D IF I C A TI ON O F VE HI C LE ....
Please read this manual and f ollow all instructions carefully . T o emphasize the special information, the symbol and the words W ARNING or CA UTION hav e some special meanings. P ay gr eat attention to the messages . NO TE: Indicating special information which is to make maintenanc e easier or instructions clearer .
SAFE OPERA TION Rules for Saf e Operation · A pre- operation check must be conducted, bef ore starting the engine, insure saf ety , preven t mishaps, and damage to componen ts. · It is strongly suggested that all operators take a c er tied motorcycle rider ’ s course prior to operating the vehicle .
SAFE T Y GEAR 1. Never operat e this mini bike without wearing a DO T approv ed motorcycle helmet which ts properly . Operators should also wear ey e protection (goggles or face shield), glov es, boots, long-sleev ed shir t or jacket, and long pants.
MA I N D A T A Description Data Description Data Overall length 1624mm (64”) Cylinder bor e x stroke 6.8cm X 15.41cm (2.68” X 2.13”) Overall width 737mm (29”) PT O shaft rotation Count er clockwise Overall height 914mm (36”) Output, max 6.5hp at 3600 rpm Wheelbase 1162mm (45.
P ARTS & SUBASSEMBLIES Rear brake lever Throttle twist grip 6.
F ront Wheel F ront Shock Absorber EP A Sticker Side Stand Rear Wheel Seat Cushion 7 Pull Start Cord Hand brake Air F ilter Headlight Clutch cov er Gas T ank F oot pegs Decorative tank Drive Chain V e.
OPERA TION F U E L V A L V E F uel lling The capacity of the fuel tank is 4.2L (.95 gal) . Unscrew the gas cap by turning it coun ter clockwise and carefully ll the tank with unleaded gasoline through the opening . DO NOT MIX GAS AND OIL TOGETHER, THIS IS A 4-STROKE ENGINE.
ENGINE ST ARTING 1. Set the ignition switch to “ ” position. 2. Ensure that ther e is fuel in the tank. 3. Set the fuel valve lever t o “ON” position. T o start a cold engine: 1. Place the choke lev er in the closed position 2. Star t the engine with the pull start cord.
SWIT CHES ON RIGHT HANDLEBAR Ignition switch The ignition switch is pr ovided on the right handlebar . When the switch is turned to “ ” (o ) position, the engine will not start or stops the engine. When the switch is turned to “ ” (on) position, the engine can start and the vehicle can be driven.
CHECKUPS, ADJUSTMENT AND M AINTENANCE Checking the Oil Check the engine oil each time prior to operating the mini bike . The oil level should be between the upper and lo wer lines of the oil gauge.
CHANGING THE OIL * 1. Remove the “Screw Plug ” locat ed at the bottom of the engine and let the oil drain in to an approv ed collection container . DO NO T PERFORM THIS PROCEDURE WHILE THE ENGINE IS HO T . SERIOUS BURNS C OULD RESUL T FROM CONT ACT WITH HO T OIL.
CHECKING & CLEANING THE AIR FIL TER CA UTION The air lter element must be in tact or the engine will suck in dust and dir t, resulting in a shor ter service life of the engine . W ater should be prevented fr om entering into the lt er when washing the vehicle .
ADJUSTING THE THRO T TLE CABLE Make sure the throttle cable is adjusted pr operly . T o adjust thr ottle cable, rota te adjustment nut located at the hand thr ottle. Check if the throttle twist grip has the requir ed free operating mo vement. The requir ed free operating mo vement: 2-6mm (.
ADJUSTMENT OF REAR BRAKE 1. The fron t brake hand grip should have fr ee operating movemen t of 5-7mm (.2-.3in) . 2. T o make adjustmen t, turn rear adjusting nut clockwise to reduce and count erclockwise to increase the fr ee operating mov ement of the hand brake.
GREASING PROCEDURES T O THE DRIVING CHAIN 1. Shut o the engine 2. Add light amounts of machine oil or chain g rease to the driving chain. ( T oo much machine oil or chain grease ma y cause splattering to occur .) Attention: The chain should be replac ed when the adjusting limit has reached it’ s maximum.
VEHICLE W ASHING Cleaning the vehicle regularly can slo w down the color fading of its body and make it easier to check if there is an y damage and any oil leakage. 1. After pre-wiping, the vehicle should be washed with clean w ater to remo ve dirt y residues so as to prev ent corrosion.
INSTRUC TIONS FOR ST OR A GE If the vehicle is not going to be used for a long period of time , for example , in winter time , some steps should be taken to pr event malfunction of and damage to its components which might be caused by long stor age.
RESUMPTION OF SER VICE AFTER ST ORAGE 1. Remove the co vering and remo ve the wooden blocks used in storing the v ehicle. Change the engine oil if the vehicle has been out of service for ov er 4 months. 2. Drain o the remaining at omized anti-rust oil from the fuel tank, follo wed by lling it with fresh gasoline therein.
MAINTENANCE SCHEDULE Each Use 1st Month or 20 hours Every 3 Months or 50 hours Every 6 Months or 100 hours Every Y ear or 300 hours Engine Oil- Check X * Engine Oil - Change X X Air F ilter-Check X * .
“*” means: This item of maintenance should be carried out at a service center . It may be also done by the user with ref erence to this manual provided special t ools and authorized spare parts are used. The user must also be capable of completing the proc edure.
Baja Motorspor ts, LL C 2910 South Hardy Drive , Suite 103 T empe , AZ 85282 T el: 480-222-8280 T oll F ree: 888-863-2252.
デバイスBaja HT65/165の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Baja HT65/165をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBaja HT65/165の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Baja HT65/165の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Baja HT65/165で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Baja HT65/165を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBaja HT65/165の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Baja HT65/165に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBaja HT65/165デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
